Water is the working fluid in a Rankine cycle. Steam exits the steam generator at 1500 lbf/in.² and 1100°F. Due to heat transfer and frictional effects in the line connecting the steam generator and turbine, the pressure and temperature at the turbine inlet are reduced to 1400 lbf/in.² and 1000°F, respectively. Both the turbine and pump have isentropic efficiencies of 85%. Pressure at the condenser inlet is 2 lbf/in.2, but due to frictional effects the condensate exits the condenser at a pressure of 1.5 lbf/in.² and a temperature of 110°F. The condensate is pumped to 1600 lbf/in.² before entering the steam generator. The net power output of the cycle is 1x 10° Btu/h. Cooling water experiences a temperature increase from 60°F to 76°F, with negligible pressure drop, as it passes through the condenser. Determine for the cycle: (a) the mass flow rate of steam, in lb/h. (b) the rate of heat transfer, in Btu/h, to the working fluid passing through the steam generator. (c) the percent thermal efficiency.

Water is the working fluid in a Rankine cycle. Steam exits the steam generator at 1500 lbf/in.² and 1100°F. Due to heat transfer and frictional effects in the line connecting the steam generator and turbine, the pressure and temperature at the turbine inlet are reduced to 1400 lbf/in.² and 1000°F, respectively. Both the turbine and pump have isentropic efficiencies of 85%. Pressure at the condenser inlet is 2 lbf/in.2, but due to frictional effects the condensate exits the condenser at a pressure of 1.5 lbf/in.² and a temperature of 110°F. The condensate is pumped to 1600 lbf/in.² before entering the steam generator. The net power output of the cycle is 1x 10° Btu/h. Cooling water experiences a temperature increase from 60°F to 76°F, with negligible pressure drop, as it passes through the condenser. Determine for the cycle: (a) the mass flow rate of steam, in lb/h. (b) the rate of heat transfer, in Btu/h, to the working fluid passing through the steam generator. (c) the percent thermal efficiency.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Related questions

Q: Steam is the working fluid in an ideal Rankine cycle. Saturated vapor enters the turbine at 10 MPa…

Q: Water is the working fluid in an ideal Rankine cycle. Steam enters the turbine at 1400 lb/in² and…

Q: 1. Water is the working fluid in a Carnot vapor power cycle. Saturated liquid enters the boiler at a…

Q: 8.21 Steam at 32 MPa, 520°C leaves the steam generator of an ideal Rankine cycle modified to include…

Q: Water is the working fluid in a Rankine cycle. Steam exits the steam generator at 1500 lbf/in.² and…

Q: Water is the working fluid in an ideal Rankine cycle. Steam enters the turbine at 1400 lbf/in2 and…

Q: ater is the working fluid in a Rankine cycle that produces 125 MW of power. The superheated vapor…

Q: 2. (#6-DimagPP18) A reheat regenerative steam cycle operates with condenser pressure of 0.007 MPa.…

A: Condenser pressure, P1 = 0.007 MPaInlet conditions to the turbine: P2 = 13.5 MPa, T2 = 540°CTurbine…

Q: The net work output and the thermal efficiency for the Carnot and the simple ideal Rankine cycles…

A: Given data as per the question Condenser pressure =50 kpa Steam pressure at the entrance of turbine…

Q: In a cogeneration system, a Rankine cycle operates with steam entering the turbine at 800 lb/in.2,…

Q: Water is the working fluid in a Rankine cycle with reheat. Superheated vapor enters the turbine at…

A: The objective of the question is to determine the total heat addition, the percent thermal…

Q: working fluid in an ideal Rankine cycle. The sa 8.0 MPa and saturated liquid exits the conden e net…

Q: Water is the working fluid in a Rankine cycle. Steam exits the steam generator at 1500 lbf/in.2 and…

Q: A power plant involves thermodynamic cycles to generate electrical power. At the first stage, water…

Q: Water is the working fluid in an ideal Rankine cycle. Steam enters the turbine at 1400 lbf/in² and…

Question

Water is the working fluid in a Rankine cycle. Steam exits the steam generator at 1500 lbf/in.² and 1100°F. Due to heat transfer and
frictional effects in the line connecting the steam generator and turbine, the pressure and temperature at the turbine inlet are
reduced to 1400 lbf/in.² and 1000°F, respectively. Both the turbine and pump have isentropic efficiencies of 85%. Pressure at the
condenser inlet is 2 lbf/ in.², but due to frictional effects the condensate exits the condenser at a pressure of 1.5 lbf/in.² and a
temperature of 110°F. The condensate is pumped to 1600 lbf/in.² before entering the steam generator. The net power output of the
cycle is 1x 10⁹ Btu/h. Cooling water experiences a temperature increase from 60°F to 76°F, with negligible pressure drop, as it passes
through the condenser.
Determine for the cycle:
(a) the mass flow rate of steam, in lb/h.
(b) the rate of heat transfer, in Btu/h, to the working fluid passing through the steam generator.
(c) the percent thermal efficiency.
(d) the mass flow rate of cooling water, in lb/h.

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step by step

Solved in 2 steps with 1 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

STEP 4 PLS
In a cogeneration system, a Rankine cycle operates with steam entering the turbine at 800 lb/in.², 700°F, and a condenser pressure of 180 lb/in.² The isentropic turbine efficiency is 90%. Energy rejected by the condensing steam is transferred to a separate process stream of water entering at 250°F, 140 lb/in.2 and exiting as saturated vapor at 140 lb/in.2 The mass flow rate of the process stream is 48,000 lb/h. Let To -70°F, po - 14.7 lb//in.² Step 1 Determine the mass flow rate for the working fluid of the Rankine cycle, in lb/h. mcycle Step 2 Hint W Your answer is correct. cycle = 54852.5 Determine the net power output for the cycle, in Btu/h. Hint Step 3 Your answer is correct. 7087421.984 € = i lb/h eTextbook and Media Save for Later Btu/h Evaluate an exergetic efficiency for the overall cogeneration system. The exergetic efficiency is defined as the net rate of exergy output divided by the net rate of exergy input. Attempts: 1 of 4 used % Attempts: 2 of 4 used Attempts: 0 of 4…
A steam Rankine cycle operates with a condenser temperature of 30°C, and a boiler pressure of 15MPa. The turbine is divided into two stages, a high-pressure turbine, and a low pressure turbine. In between the turbine stages the steam is reheated by the boiler so that the inlet temperature to both turbine stages is the same. The exit pressure of the first turbine stage is 7MPa. The condenser inlet is a saturated vapor and the outlet a saturated liquid. What is the net work of the cycle? What is the thermal efficiency of the cycle?
Water is the working fluid in a Rankine cycle. Steam exits the steam generator at 1500 lbf/in.2 and 1100°F. Due to heat transfer and frictional effects in the line connecting the steam generator and turbine, the pressure and temperature at the turbine inlet are reduced to 1400 lbf/in.² and 1000°F, respectively. Both the turbine and pump have isentropic efficiencies of 95%. Pressure at the condenser inlet is 2 lbf/ in.2, but due to frictional effects the condensate exits the condenser at a pressure of 1.5 lbf/in.² and a temperature of 110°F. The condensate is pumped to 1600 lbf/in.² before entering the steam generator. The net power output of the cycle is 5.5 x 108 Btu/h. Cooling water experiences a temperature increase from 60°F to 76°F, with negligible pressure drop, as it passes through the condenser. Determine for the cycle: (a) the mass flow rate of steam, in lb/h. (b) the rate of heat transfer, in Btu/h, to the working fluid passing through the steam generator. (c) the percent…
Please solve the following
Water is the working fluid in a Rankine cycle. Superheated vapor enters the turbine at 8 MPa, 5608C with a mass flow rate of 7.8 kg/s and exits at 8 kPa. Saturated liquid enters the pump at 8 kPa. The isentropic turbine efficiency is 88%, and the isentropic pump efficiency is 82%. Cooling water enters the condenser at 188C and exits at 368C with no significant change in pressure. Determine: (a) the net power developed, in kW. (b) the thermal efficiency. (c) the mass flow rate of cooling water, in kg/s