To transport a series of bundles of shingles A to a roof, a contractor uses a motor-driven lift consisting of a horizontal platform BC which rides on rails attached to the sides of a ladder. The lift starts from rest and initially moves with a constant acceleration a as shown. The lift then decelerates at a constant rate a, and comes to rest at D, near the top of the ladder. Knowing that the coefficient of static friction between a bundle of shingles and the horizontal platform is 0.30, determine the largest allowable acceleration aj and the largest allow- able deceleration a, if the bundle is not to slide on the platform. D 4.4 m 65 A В 0.8 m

To transport a series of bundles of shingles A to a roof, a contractor uses a motor-driven lift consisting of a horizontal platform BC which rides on rails attached to the sides of a ladder. The lift starts from rest and initially moves with a constant acceleration a as shown. The lift then decelerates at a constant rate a, and comes to rest at D, near the top of the ladder. Knowing that the coefficient of static friction between a bundle of shingles and the horizontal platform is 0.30, determine the largest allowable acceleration aj and the largest allow- able deceleration a, if the bundle is not to slide on the platform. D 4.4 m 65 A В 0.8 m

Name: To transport a series of bundles of shingles A to a roof, a contracto
Uploaded: 2024-03-20T06:57:57.000Z
Channel: Bartleby
Description: To transport a series of bundles of shingles A to a roof, a contractoruses a motor-driven lift consisting of a horizontal platform BC whichrides on rails attached to the sides of a ladder. The lift starts fromrest and initially moves with a constant

College Physics

11th Edition

ISBN:9781305952300

Author:Raymond A. Serway, Chris Vuille

Publisher:Raymond A. Serway, Chris Vuille

Chapter1: Units, Trigonometry. And Vectors

Section: Chapter Questions

Problem 1CQ: Estimate the order of magnitude of the length, in meters, of each of the following; (a) a mouse, (b)...

See similar textbooks

Similar questions

Under the influence of its drive force, a snowmobile is moving at a constant velocity along a horizontal patch of snow. When the drive force is shut off, the snowmobile coasts to a halt. The snowmobile and its rider have a mass of 139 kg. Under the influence of a drive force of 180 N, it is moving at a constant velocity whose magnitude is 5.43 m/s. The drive force is then shut off. Find (a) the distance in which the snowmobile coasts to a halt and (b) the time required to do so. (a) S = (b) t = i i
A boy shoves his stuffed toy zebra down a frictionless chute. It starts at a height of 1.63 m above the bottom of the chute with an initial speed of 1.41 m/s . The toy animal emerges horizontally from the bottom of the chute and continues sliding along a horizontal surface with a coefficient of kinetic friction of 0.273 . How far from the bottom of the chute does the toy zebra come to rest? Assume ?=9.81 m/s2 .
A worker pushes a 35.0-kg package on a horizontal roller-belt conveyor until it reaches a certain speed. The package then coasts on the horizontal conveyor, all the while slowing down, until it comes to a complete stop after moving 1.20 m. While the package is coasting on the conveyor, the opposing friction force averages 6.00 N. Use the WET to find the speed of the package after the worker pushes it and just as it begins to coast. 0.625 m/s 0.759 m/s 0.600 m/s 0.510 m/s 0.802 m/s 0.641 m/s
Two crates of fruit are released from the top of a ramp inclined at 30 degrees from the horizontal and 4.5 meter long. The two crates consist of an apple crate of mass 20 kg that is placed in front of a watermelon crate of mass 80 kg. The apple crate has a coefficient of friction of 0.20 while the watermelon crate has a coefficient of friction of 0.15. How long does it take the apple crate to reach the bottom of the incline if it needs to travel a distance of 4.5 meters?
In the figure, a cord runs around two massless, frictionless pulleys. A canister with mass m = 41 kg hangs from one pulley, and you exert a force F on the free end of the cord. (a) What must be the magnitude of F if you are to lift the canister at a constant speed? (b) To lift the canister by 3.5 cm, how far must you pull the free end of the cord? During that lift, what is the work done on the canister by (c) your force (via the cord) and (d) the gravitational force? (Hint: When a cord loops around a pulley as shown, it pulls on the pulley with a net force that is twice the tension in the cord.) (a) Number i Units (b) Number i Units (c) Number Units (d) Number i Units
Under the influence of its drive force, a snowmobile is moving at a constant velocity along a horizontal patch of snow. When the drive force is shut off, the snowmobile coasts to a halt. The snowmobile and its rider have a mass of 143 kg. Under the influence of a drive force of 220 N, it is moving at a constant velocity whose magnitude is 4.38 m/s. The drive force is then shut off. Find (a) the distance in which the snowmobile coasts to a halt and (b) the time required to do so. (a) s= (b) t = i i + +
In the figure, a 5.40 kg block is sent sliding up a plane inclined at 0 = 37.0° while a horizontal force F of magnitude 50.0 N acts on it. The coefficient of kinetic friction between block and plane is 0.340. What are the (a) magnitude and (b) direction (up or down the plane) of the block's acceleration? The block's initial speed is 4.40 m/s. (c) How far up the plane does the block go? (d) When it reaches its highest point, does it remain at rest or slide back down the plane? (a) Number i Units (b) (c) Number Units (d)
Your answer is partially correct. of magnitude 50.0 N acts on it. In the figure, a 5.20 kg block is sent sliding up a plane inclined at 0 = 37.0° while a horizontal force The coefficient of kinetic friction between block and plane is 0.330. What are the (a) magnitude and (b) direction (up or down the plane) of the block's acceleration? The block's initial speed is 4.40 m/s. (c) How far up the plane does the block go? (d) When it reache its highest point, does it remain at rest or slide back down the plane? (a) Number i -2.7 (b) down V (c) Number i Units Units m/s^2
A block of mass m = 0.5 kg is kicked so that it slides up a ramp inclined at an angle θ = 30°. At the bottom of the ramp, the block has speed v0 = 4.0 m/s. There is a coefficient of kinetic friction between the block and ramp µK = 0.18. (a) How far up the ramp does the block slide? (b) Assume that the block comes to rest and does not slide back down the ramp. What must be the minimum coefficient of static friction between the block and ramp?
At Ted's request, Bill pushes the pizza box across the granite countertop towards Ted. When the box leaves Bill's hand it is sliding at 2.60 m/s. The box comes to rest over a distance of 110 cm. What is the coefficient of kinetic friction, uk, between the pizza box and the countertop? (Ignore air drag.)
A bartender slides a mug of root beer with mass m - 2.4 kg down a bar top of length L 1.8 m to an inattentive patron who lets it fall a height h 1.4 m to the floor. The bar top (see figure below) is smooth but still has a coefficient of kinetic friction of HK 0.078. (Assume up and to the right as the positive directions.) (a) If the bartender gave the mug an initial velocity of 2.5 m/s, at what distance D from the bottom of the bar will the mug hit the floor? 0.9996 m (b) What is the mug's velocity (magnitude and direction) as it impacts the floor? Magnitude 75 Direction (counterclockwise from the +x-axis) 68.9 X m/s x ° (c) Draw velocity time diagrams for both the x and y directions for the mug, from the time when the bartender lets: go of the mug to when it hits the floor. Need Help? Read I Submit Answer