The standard addition method is used to analyze a sample of a river water for mercury. Solution A is made by pipetting 5.00 mL of undiluted sample in to a 10 ml volumetric flask and filling to the mark with DI water. Solution B is made by pipetting 5.00 mL of undiluted sample and 3.00 mL of 15.0 ppb of Hg standard into same 10.0 mL volumetric flask and filling to the mark with DI. Solution A and B are analyzed using atomic absorption spectroscopy and give a percent transmittance values of 56 % and 33 % respectively (not blank corrected). A blank has a transmittance of 96%. What is the corrected absorbance of both solution A and B? O A. Solution A: 0.123 Solution B: 0.463 O B. Solution A: 0.463 Solution B: 0.234 O. Solution A: 0.123 O D. Solution A: 0.234 Solution B: 0.234 Solution B: 0.463

The standard addition method is used to analyze a sample of a river water for mercury. Solution A is made by pipetting 5.00 mL of undiluted sample in to a 10 ml volumetric flask and filling to the mark with DI water. Solution B is made by pipetting 5.00 mL of undiluted sample and 3.00 mL of 15.0 ppb of Hg standard into same 10.0 mL volumetric flask and filling to the mark with DI. Solution A and B are analyzed using atomic absorption spectroscopy and give a percent transmittance values of 56 % and 33 % respectively (not blank corrected). A blank has a transmittance of 96%. What is the corrected absorbance of both solution A and B? O A. Solution A: 0.123 Solution B: 0.463 O B. Solution A: 0.463 Solution B: 0.234 O. Solution A: 0.123 O D. Solution A: 0.234 Solution B: 0.234 Solution B: 0.463

Chemistry

10th Edition

ISBN:9781305957404

Author:Steven S. Zumdahl, Susan A. Zumdahl, Donald J. DeCoste

Publisher:Steven S. Zumdahl, Susan A. Zumdahl, Donald J. DeCoste

Chapter1: Chemical Foundations

Section: Chapter Questions

Problem 1RQ: Define and explain the differences between the following terms. a. law and theory b. theory and...

See similar textbooks

Related questions

Q: 3. A 0.1093-g sample of impure Na2CO3 was analyzed by the Volhard method. After adding 50.00 mL of…

A: Given , mass of impure Na2CO3=0.1093 gVolume of AgNO3= 50.00 mLConcentration of AgNO3=0.06911…

Q: Q4. A 5.00 ml aqueous sample containing hydrogen peroxide was diluted to 25 mL and analyzed by…

A: Permanganate reacts with hydrogen peroxide in acidic medium and reduces to Mn2+ and oxidises…

Q: A student determined the chloride content of a commercial salt by using the Mohr method. A 0.7725 -g…

A: The titration reaction is Ag+ + Cl- = AgCl (s) Volume*Molarity = mmol Percentage of Cl- = [(mass of…

Q: When treating a mixture of metals( copper and zinc) with an excess of solution of hydrochloric acid,…

A: Given that - Mixture of metals of copper and zinc react with hydrochloric acid. Gives 2.24 L of a…

Q: equation for the reaction of aqueous Pb(ClO3)₂ with aqueous Nal. Include phases. chemical equation:…

A: mass = mole × molar mass In this reaction, 1 mole Pb(ClO3)2 react with 2 mole NaI to form 1 mole…

Q: A K2SO4 solution is prepared by weighing out a certain amount of the pure solid reagent, dissolving…

A: Given that the concentration of K+ in the final solution is 0.100 %(w/v). The final solution is made…

Q: The chloride in the sample is to be determined gravimetrically by precipitating and weighing AgCl.…

Q: A 20.330 g sample of aqueous waste leaving a fertilizer manufacturer contains ammonia. The sample is…

A: Titration is a volumetric analysis in which the unknown concentration of the sample is measured by…

Q: A forensic chemist is given a white powder by the investigator of a crime scene. The investigator…

A: Upon adding an ionic solute to an aqueous solution of another ionic compound, the ions present in…

Q: add 0.1011 g of a primary standard FAS into a volumetric flask and diluted it to the line with…

A: FAS is ferrous ammonium sulphate and also known as Mohr salt. It's molecular weight is 392.14g/mol.…

Q: Used 24.38 mL of a 0.1014M NaOH solution to titrate the dilute HCL solution to the endpoint in one…

A: Molarity of the concentrated HCl stock solution, C = 0.9889 M Volume of stock solution used to…

Q: An sample of eggshell that weighs 1.0014g and is 51μm thick is titrated with disodium EDTA. A…

A: The major component of eggshells is calcium carbonate. The analysis is done by reacting the calcium…

Q: A student performed a titration to determine the exact concentration of NaOH(aq). The titration was…

A: Average titre value = 25.06 + 25.15 + 25.02 + 25.17 + 25.075 = 25.09

Q: A 0.1093-g sample of impure Na2CO3 was analyzed by the Volhard Method. After adding 50.00 mL of…

A: Reaction taking place: Na2CO3 + 2AgNO3 →→ Ag2CO3 + 2NaNO3 Reaction of KSCN with excess AgNO3: AgNO3…

Q: A student wants to prepare a standard solution of BSA. They create a stock solution of BSA by add…

A: Concentration of stock solution=0.174 g10 mL=0.0174 g/mL

Q: KHP (aq)+NaOH (aq)-->NaKHP (aq)+H2O(l) Trial Vi (mL) Vf (mL) 1 36.19 48.56 2 3 A…

A: According to the chemical equation, the number of moles of KHP react with NaOH are equal.

Q: . The total cation content of natural water is often determined by exchanging the cations for…

A: To calculate the number of moles of cations present in 1.00 L of the sample, we can follow these…

Q: 1. Molarity of the NaOH solution 0.238 mol/L Trial 1 Trial 2 Trial 2. Volume of H;PO4 added to flask…

A: The given problem is titration of NaOH Vs H3PO4. Given Molarity Of NaOH=0.238mol/L

Q: When standardizing two liters of a potassium permanganate solution with a primary standard solution…

A: The objective of this question is to determine the mass range of sodium oxalate that should be…

Q: A 0.4512g sample of primary standard grade Na2CO3 required 36.44mL of an H2SO4 solution to reach the…

Q: In a lab, you diluted a sample of bleach to 1/10 concentration in a 250 vol. flask. Then…

A: Given: Volume of diluted bleach (V1) = 250 mL molarity of sodium thiosulfate (M1) = 0.1215 M diluted…

Q: a) Based on the data in the table, determine which reactant is limiting after the addition of the…

A: Since you have posted a question with multiple sub-parts, we will solve first three subparts for…

Question

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

Step 2

Step 3

Step 4

Step by step

Solved in 4 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, chemistry and related others by exploring similar questions and additional content below.

Similar questions

A 1.8M HCl solution was standardized against 1.4g sodium carbonate Na2CO3 (MW = 106g/mol) . The Na2CO3 standard required 13.5 mL of the HCl solution to completely react up to the indicator endpoint. Two chemists prepared their samples by taking 12.0-mL aliquots of each household ammonia solution and diluting it to 25.0 mL. With the same titrant and indicator, Chemist #1’s ammonia solution required 15 mL of the standardized titrant, whereas, Chemist #2's ammonia solution required 35 mL of the same titrant. Write the balanced equation for the analyte and the titrant Solve for the exact concentration of the HCl titrant in molarity. What are the respective concentrations of ammonia of Chemist #1's sample and Chemist #2's samples in Molarity?
Six 50.0 ml volumetric flask 1-6 are labeled. 10.00 ml of 2.00 x 101 M Fe(NO3)3 solution was then pipet into each volumetric flask. A 1.00,2.00,3.00,4.00 and 5.00ml of 2.00 x 10-3M NaSCN solution was then pipetted to flask 2 through 6 respectively. A sufficient 0.10 M nitric acid was then added to each flask to make them total volume of 50.00ml. 1.a)Calculate the final Fe(NO3)3 concentrations for each. 1.b)Also how would you find the initial concentration of SCN- for each flask? Please show calculations to solutions.Thanks
A 0.6892 g mixture of KCN (MW 65.116 g/mol) and NaCN (MW 49.005 g/mol) was dissolved in water. AgNO, was added to the solution, precipitating all of the CN in solution as AgCN (MW 133.886 g/mol). The dried precipitate weighed 1.611 g. Calculate the weight percent of KCN and NaCN in the original sample. 4.5 KCN wt% = Incorrect NaCN wt% % Incorrect
1,5419 g of magnetite (Fe3O4) ore; in concentrated HCL to form a mixture of Fe + 2 and Fe+3it's unraveling. By adding HNO3 to it, all Fe+2 s are upgraded to Fe+3. And the addition of FE+3 s NH3,with Fe (OH)3, precipitating into. The sediment is weighed as 0.8525 g in the form of Fe2O3 after the necessary operations. Calculate the percentage of Fe3O4 in the sample.
A sample of dicing salt was to be analyzed for chloride content using Fajan's method. A 1.1034g sample of the deicing salt was weighed into an Erlenmeyer flask and 50 mL of water, 0.1 g of dextrin, and 5 drops of dichlorofluorescein indicator was added to the flask. It took 39.44 mL of 0.5042 M silver nitrate to reach the endpoint of the titration. What is the % chloride in the sample, reported with the correct number of significant figures? A.63.889% C. 63.90% B. 63.888% D. 63.9%
Molarity of Na2S2O3 (stock solution). 0.100 M Volume of diluted bleach titrated (taken from the volumetric flask). 10ml Initial Burette Reading. 14.80 Final Burette Reading 25.60 Volume of Na2S2O3 used in the titration (mL). 10.80 Moles of Na2S2O3 used in the titration. 1.71 Moles of S2O3–2 used. 1.66 Moles of I2 initially present in titration mixture 0.83 Moles of NaOCl in the diluted bleach titrated. 0.415 Moles of OCl– in the diluted bleach titrated. ?
A 0.1093-g sample of impure Na2CO3 was analyzed by the Volhard Method. After adding 50.00 mL of 0.06911 M AgNO3, the sample was back titrated with 0.05781 M KSCN, requiring 27.36 mL to reach the end point. Report the purity of Na2CO3sample.
A student weighted a 1.150gram sample of pure KHP and titrated it with 36.45ml of KO solution. Calculate the normality of the KOH.
A dried sample of commercial salt was prepared by a coning and quartering. A 0.911-g sample of the salt was dissolved and diluted to 250.0 mL in a volumetric flask. Repeat 10.00-mL aliquots of this solution were titrated with a 0.054 M silver nitrate solution, requiring 9.68 mL to reach equivalence. Calculate the %(w/w) NaCl in the original sample.
A 0.1093-g sample of impure Na2CO3 was analyzed by the Volhard Method. After adding 50.00 mL of 0.06911 M AgNO3, the sample was back titrated with 0.05781 M KSCN, requiring 27.36 mL to reach the end point. Report the purity of Na2CO3 sample.
A 0.1093-g sample of impure Na2CO3( Molecular weight 106) was analyzed by the Volhard method. After adding 50.00 mL of 0.06911 M AGN03 (Molecular weight 169.87), the sample was back titrated with 0.05781 M KSCN, requiring 27.36 mL to reach the end point. Report the purity of the Na2CO3 sample.
= A 0.5099 g mixture of KCN (MW 65.116 g/mol) and NaCN (MW = 49.005 g/mol) was dissolved in water. AgNO, was added to the solution, precipitating all of the CN in solution as AgCN (MW : 133.886 g/mol). The dried precipitate weighed 1.184 g. Calculate the weight percent of KCN and NaCN in the original sample. KCN wt% = NaCN wt% = = % %