The robot arm is elevating and extending simultaneously. At a given instant, 6 = 30°, 0 = 40 deg/s, = 120 deg/s², 1 = 0.5 m, i = 0.4 m/s, and Ï = -0.3 m/s². Compute the radial and transverse forces Fr and Fe that the arm must exert on the gripped part P, which has a mass of 1.2 kg. Compare with the case of static equilibrium in the same position. 0.75 m eeeeeeeee e -x 1.2 kg

The robot arm is elevating and extending simultaneously. At a given instant, 6 = 30°, 0 = 40 deg/s, = 120 deg/s², 1 = 0.5 m, i = 0.4 m/s, and Ï = -0.3 m/s². Compute the radial and transverse forces Fr and Fe that the arm must exert on the gripped part P, which has a mass of 1.2 kg. Compare with the case of static equilibrium in the same position. 0.75 m eeeeeeeee e -x 1.2 kg

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

The bar AB is uniform and has a mass of 50.0 kg. At the moment shown, the rod has an angular velocity of 4.00 rad/s and spring is stretched by 0.30 m. The force constant of the spring is 25.0 N/m.a) Determine whether or not the bar will reach the horizontal position.b) If the bar becomes horizontal, calculate its angular velocity at that position. If not, calculate the angle the bar makes with the horizontal when it comes to rest momentarily.
QUESTION 14 The collar of mass m = 77 kg in Figure Q14 slides outwards with an initial radial velocity vo = 0.58 m-s-1 from zero initial radial position (see dashed box) along a smooth rotating shaft (see unit vector ur). The shaft rotates with constant angular speed of w = 2 rad-s-1. Determine the magnitude of the constant force F (N) that needs to be applied in the radial direction (pointing towards the centre of the shaft) in order to decelerate the collar to zero radial velocity the moment when the collar reaches a radial position r = 0.19 m. Consider motion in a horizontal plane, such that gravity can be ignored. Provide only the numerical value (in Newtons) to zero decimal places and do not include the units in the answer box. Ur F m Vo Figure Q14: Rotating collar-shaft system
Find the minimum weight of block A in order for motion to be impending down the plane (to the left). Assume the pulley to be frictionless. Given:WB = 180 lbs, θ = 40 °, μ = 0.2 for all surfaces.
Subject: meca
4) As in the figure, in an amusement vehicle rotating in the amusement park, the center shaft rotates at a speed of n=7 rpm. Meanwhile, the child is moved with the position equations r = (2 sinθ + 5) m and z = (3 cosθ) m. Find the forces generated in the child in all three axes (r, θ, z). The weight of the child is m = 39 kg. It was θ=122 degrees at the time the photo was taken.
When in the mode of adsorbing, the vertical shaft is rotating with an angular velocity of 3 rad/s at 0 = 0°. When picking up trashes, a force F needs to be applied to the collar so that 0 = 90°. Help students determine the angular velocity of the shaft at 0 = 90°. Also, find the work done by force F from 0 = 0° to 0 = 90°. Neglect the mass of rods GH and EF and the collars I and J. The rods AB and CD each have a mass of 10 kg. 0.3 m E 0.3 m 0.1 m 0.3 m A 0.1 m H F 0 0.3 m B
See Image
(dynamic)
The electric motor is used to pull a train at a maximum constant speed of 60 km/h. This motor has a power of 340 kW. The train is pulled directly up the inclination of 1 in 180. The tractive resistance against the motion is 80 N.1.Draw the free body diagram representing all forces acting on the train2.Calculate the mass of the train.
A heavy cabinet with a mass of 135kg is transported on the truck platform. Assume that the friction between the cabinet and the platform is so great that the cabinet cannot slip, but can instead tip over. The dimensions shown in the cabinet figure are hG = 1.8m, xG = 1.0m and b = 3.4m. How high can the maximum acceleration of the truck to the right be without the cabinet tipping over? What is the angular acceleration of the cabinet in the situation under consideration
Q5/ A shaft carry three masses A, B, and C of magnitude 200 kg, 300 kg, and 150 kg respectively and revolving at radii 80 mm, 70 mm, and 60 mm. The angles between these masses measured anticlockwise are A to B 45° and B to C 70°. If the balancing masses revolve at a radius of 100 mm, find graphically their magnitudes and angular positions. All masses rotating in the same plane.
vibrations show full solution