The floor system of an apartment building consists of a 100-mm-thick reinforced concrete slab resting on three steel floor beams, which in turn are supported by two steel girders, as shown in the Figure. The areas of cross section of the floor beams and the girders are 11,800 mm2 and 21,100 mm2, respectively. Determine the dead loads acting on the beam CD and the girder AE. 8.5m- Steel girder w-21,100 mm) Steel column -100 mm concrete slab D 2 at 3.6m-7.2m Steel floor beam C-11,800mm

The floor system of an apartment building consists of a 100-mm-thick reinforced concrete slab resting on three steel floor beams, which in turn are supported by two steel girders, as shown in the Figure. The areas of cross section of the floor beams and the girders are 11,800 mm2 and 21,100 mm2, respectively. Determine the dead loads acting on the beam CD and the girder AE. 8.5m- Steel girder w-21,100 mm) Steel column -100 mm concrete slab D 2 at 3.6m-7.2m Steel floor beam C-11,800mm

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

A steel rail for railroad track is 10 m long. Determine the stress in the rail if it was completely restrained from expanding. Let E = 210 GPa and =12 x 10-61/ C. The temperature changes from 20 C to 35 C. A)37.8 MPa B)18.9 MPa C)23.8 MPa D)46.4 MPa
As shown in the figure below, determine the internal loadings at points A,B and. Consider the uniform weight of the whole structure which is 77 lbs per ft. FN= 87 OR 87X10 = 870
Calculate and illustrate the magnitude loading in kN/m acting at beam CF. Thank you
ASAP12
show step by step solution
incorrect solution will receive the negative rating ......A 60 ft. beam supports two applied distributed loads, a distributed load w1-248 pounds her linear foot (plf) and distributed load two d2=125 pounds per linear foot (plf). In addition, the estimated weight of the beam is 55 pounds per linear foot. Calculate the magnitude (in pounds) of the horizontal and vertical components of reactions at supports A and B.
0131% D 14:19 8.8 TNT Wi-Fi voWiFi •4* K/s a. Which of the following is the most stressed leg(s)? b. If the capacity of each leg is 25 kn, what is the safe value of W? c. Determine the axial force on leg AD if the maximum safe value of W is applied. SITUATION 4. Knowing that do = 3m, determine the following: 2m, 3m 3m de id 4m B DI 5kN 5kN 10KN a. Distance dɛ b. Reaction at E c. Total length of cable.
Calculate the maximum shear stress in the beam: 50 N/M 10mm 30 mm 10 mm 10m 40 mm
A uniform rectangular slab of concrete, 2.5m by 1.5m of mass 1.300 kg rests on vertical columns at the four corners. One of these columns may be regarded as rigid and the others as three identical columns of the same length, cross-section, and elasticity. Assuming that the slab may be treated as rigid and that it remains sensibly horizontal when the elastic columns are slightly compressed under load, determine the reaction at each support.
The floor of an apartment building shown is subjected to a uniformly distributed dead load of 1.5 kPa and a uniformly distributed live load of 1.9 kPa over its surface area. Determine the service (ASD) reaction (kN) of beam BG that will be transferred to the girder at G. Girder Floor beam Column A Į B FH -IK G L H M 4 at 7.5 m = 30 m D N E 2 at 12 m = 24 m
26. Determine the force F required to keep the 200 kg crate in equilibrium with the position shown.