The circuit in the figure below contains two resistors, R, 1.9 kl and R₂2.8 kf, and two capacitors, C₂ -1.9 f and C₂-3.1 uf, connected to a battery with emf E-140 V. If there are nocharges on the capacitors before switch S is closed, determine the charges a, and dy on capacitors C, and C₂, respectively, as functions of time, after the switch is closed. Hint: First reconstruct thcircuit so that it becomes a simple RC circuit containing a single resistor and single capacitor in series, connected to the battery, and then determine the total charged a stored in the circult. (Use thgiven values for R₁, R₂, C₁, C₂, and E. Use the following as necessary: t. Do not include any units in your response.)91-42.8AC9269.8R₁

The charging resistance R of the circuit equals the equivalent resistance of the parallel…

The circuit in the figure below contains two resistors, R, 1.9 kl and R₂-2.8 k, and two capacitors, C₁1.9 and C₂-3.1 af, connected to a battery with emf E-140 V. If there are no charges on the capacitors before switch 5 is closed, determine the charges e, and oy on capacitors C, and C₂, respectively, as functions of time, after the switch is closed. Hint: First reconstruct t circuit so that it becomes a simple RC circuit containing a single resistor and single capacitor in series, connected to the battery, and then determine the total charged a stored in the circut. (Use t given values for R₁, R₂, C₁, C₂, and E. Use the following as necessary: t. Do not include any units in your response) 91-42.8 269.8

The circuit in the figure below contains two resistors, R, 1.9 kl and R₂-2.8 k, and two capacitors, C₁1.9 and C₂-3.1 af, connected to a battery with emf E-140 V. If there are no charges on the capacitors before switch 5 is closed, determine the charges e, and oy on capacitors C, and C₂, respectively, as functions of time, after the switch is closed. Hint: First reconstruct t circuit so that it becomes a simple RC circuit containing a single resistor and single capacitor in series, connected to the battery, and then determine the total charged a stored in the circut. (Use t given values for R₁, R₂, C₁, C₂, and E. Use the following as necessary: t. Do not include any units in your response) 91-42.8 269.8

Physics for Scientists and Engineers

10th Edition

ISBN:9781337553278

Author:Raymond A. Serway, John W. Jewett

Publisher:Raymond A. Serway, John W. Jewett

Chapter26: Current And Resistance

Section: Chapter Questions

Problem 37AP: A charge Q is placed on a capacitor of capacitance C. The capacitor is connected into the circuit...

See similar textbooks

Similar questions

Consider the circuit shown in Figure P26.24, where C1, = 6.00 F, C2 = 3.00 F. and V = 20.0 V. Capacitor C1 is first charged by closing switch S1. Switch S1 is then opened, and the charged capacitor is connected to the uncharged capacitor by closing Calculate (a) the initial charge acquired by C, and (b) the final charge on each capacitor.
A pair of capacitors with capacitances CA = 3.70 F and CB = 6.40 F are connected in a network. What is the equivalent capacitance of the pair of capacitors if they are connected a. in parallel and b. in series?
A charge Q is placed on a capacitor of capacitance C. The capacitor is connected into the circuit shown in Figure P26.37, with an open switch, a resistor, and an initially uncharged capacitor of capacitance 3C. The switch is then closed, and the circuit comes to equilibrium. In terms of Q and C, find (a) the final potential difference between the plates of each capacitor, (b) the charge on each capacitor, and (c) the final energy stored in each capacitor. (d) Find the internal energy appearing in the resistor. Figure P26.37
A capacitor with initial charge Q0 is connected across a resistor R at time t = 0. The separation between the plates of the capacitor changes as d = d0/(1 + t) for 0 t 1 s. Find an expression for the voltage drop across the capacitor as a function of time.
The- pair of capacitors in Figure P28.63 are fully charged by a 12.0-V battery. The battery is disconnected, and the switch is then closed. Alter 1.00 ms has elapsed, (a) how much charge remains 011 the 3.00-F capacitor? (b) How much charge remains on the 2.00-F capacitor? (c) What is the current in the resistor at this time?
A circuit contains a D-cell battery, a switch, a 20- resistor, and three 20-mF capacitors. The capacitors are connected in parallel, and the parallel connection of capacitors are connected in series with the switch, the resistor and the battery, (a) What is die equivalent capacitance of the circuit? (b) What is the KC time constant? (c) How long before the current decreases to 50% of the initial value once the switch is closed?
A student makes a homemade resistor from a graphite pencil 5.00 cm long, where the graphite is 0.05 mm indiameter. The resistivity of the graphite is =1.38102/m . The homemade resistor is place inseries with a switch, a 10.00-mF capacitor and a 0.50-V power source, (a) What is the BC time constant of the circuit? (b) What is the potential drop across the pencil 1.00 s after the switch is closed?
A potential difference of 1.00 V is maintained across a 10.0- resistor for a period of 20.0 s. What total charge passes by a point in one of the wires connected to the resistor in this time interval? (a) 200 C (b) 20.0 C (c) 2.00 C (d) 0.005 00 C (e) 0.050 0 C
Two conducting wires A and B of the same length and radius are connected across the same potential difference. Conductor A has twice the resistivity of conductor B. What is the ratio of the power delivered to A to the power delivered to B? (a) 2 (b) 2 (c) 1 (d) 12 (e)12
A battery is used to charge a capacitor through a resistor as shown in Figure P27.44. Show that half the energy supplied by the battery appears as internal energy in the resistor and half is stored in the capacitor. Figure P27.44
The circuit in Figure P21.59 has been connected for a long time. (a) What is the potential difference across the capacitor? (b) If the battery is disconnected from the circuit, over what time interval does the capacitor discharge to one-tenth its initial voltage?
Suppose you need to measure the potential difference between the points in Figure P29.4. Assume the voltmeter reading is the potential difference between the two leads: V = Vred Vblack. For each of the following measurements, determine at which point you would connect the red lead and at which point you would connect the black lead: a. Vb Va. b. Vc Vb. c. Vd Vc. d. Va Vd. FIGURE P29.4 Problems 4, 5, and 6.