The branched pipe as shown in figure below discharges water. The diameters of the pipe 1 is 1.5 cm, pipe 2 is 3 cm & pipe 3 is 4 cm. The discharges in pig 1 is 21 lit/sec, pipe 2 is 26.25 lit/sec. Find the discharge in pipe3 in Lt/sec, velocity in pipe 2 m/s & velocity in pipe 3 if the diameter of pipe 3 is 4 cm. (ENTER ONLY THE VALUE IN THE BOXES BY REFERRING THE UNIT GIVEN IN BRACKET. ALSO UPLOAD YOUR HAND WRITTEN ANSWERS IN THE LINK PROVIDED) Pipe 1 Pipe 3 Pipe 2 The discharge in pipe 3 (in Liter/sec) = The velocity of water in pipe 2 (in m/s) = The velocity of water in pipe 3 (in m/s) =

The branched pipe as shown in figure below discharges water. The diameters of the pipe 1 is 1.5 cm, pipe 2 is 3 cm & pipe 3 is 4 cm. The discharges in pig 1 is 21 lit/sec, pipe 2 is 26.25 lit/sec. Find the discharge in pipe3 in Lt/sec, velocity in pipe 2 m/s & velocity in pipe 3 if the diameter of pipe 3 is 4 cm. (ENTER ONLY THE VALUE IN THE BOXES BY REFERRING THE UNIT GIVEN IN BRACKET. ALSO UPLOAD YOUR HAND WRITTEN ANSWERS IN THE LINK PROVIDED) Pipe 1 Pipe 3 Pipe 2 The discharge in pipe 3 (in Liter/sec) = The velocity of water in pipe 2 (in m/s) = The velocity of water in pipe 3 (in m/s) =

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Related questions

Q: Fluid flows into a junction at a flowrate Q, and exits via two pipes of equal diameter, as shown in…

A: We can answer up to 3 subparts so we will answer first 3. Please resubmit the question by specifying…

Q: A brand of toothpaste is made using a mixture of white and red paste. During the manufacturing…

Q: Figure shows a pipe system. At the entrance to the pipe (point 1), the diameter is d₁ and it is a…

A: Given: p1 =ϕ1

Q: 7 WATER FLOWS IN A PIPE OF CONSTANT CROSS AREA 5 CM. THE PIPE IS BENT AT 90° AS SHOWN IN THE FIGURE…

Q: A brand of toothpaste is made using a mixture of white and red paste. During the manufacturing…

Q: A piping system has a Y-configuration for separating the flow as shown in Figure 4. The diameter of…

A: Given data:

Q: Q₂/Suppose in Figure 2, the lengths and diameters of pipe 1 is 300 m x 0.3 m, Pipe 2 is 150 m x 0.2…

A: Given:Pipe 1: L1=300 m, d1=0.3 mPipe 2: L2=150 m, d2=0.2 mPipe 3: L3=250 m, d3=0.25 mWater…

Q: A fluid is pumped at a rate of 0.00156 m /s through a 0.025-m-diameter pipe to fill a water tank as…

Q: Task 3 Gas, evolved as a result of a chemical reaction, sequentially flows from the retort A into…

A: Pressure: Since the tension is pushed per unit region, it is relative to push straightforwardly and…

Q: n undergraduate student of mechanical engineering wishes to calculate the w rate through the pipe…

A: Givenf=0.02V=2gHDfL

Q: An incompressible fluid flows along the pipe shown. If the inlet velocity is 25 m/s, the inlet…

Q: could you please help me calculate the maximum height of the jet , Hj in metres please

Q: 4. As shown in Figure P4, water flows out from a pipe of diameter D with a flowrate Q. How does the…

Q: In the figure shown below, m2 = 4 rad/s CCW (constant). Write the approproate vector equations, ve…

Q: 2) Caryn purchases an electronic telescope that automatically extends and rotates the lens to focus…

A: The angle is The angular velocity is The value are

Concept explainers

Applied Fluid Mechanics

A fluid is a substance that is continuously deformed by the application of shear stress. The rate of deformation of a fluid depends on its viscosity. The fluid tries to flow when it interacts with some other system.

Question

The branched pipe as shown in figure below discharges water. The diameters of the pipe 1 is 1.5 cm, pipe 2 is 3 cm & pipe 3 is 4 cm. The discharges in pipe
1 is 21 lit/sec, pipe 2 is 26.25 lit/sec. Find the discharge in pipe3 in Lt/sec, velocity in pipe 2 m/s & velocity in pipe 3 if the diameter of pipe 3 is 4 cm.
(ENTER ONLY THE VALUE IN THE BOXES BY REFERRING THE UNIT GIVEN IN BRACKET. ALSO UPLOAD YOUR HAND WRITTEN ANSWERS IN THE LINK
PROVIDED)
Pipe 1
Pipe 3
Pipe 2
The discharge in pipe 3 (in Liter/sec) =
The velocity of water in pipe 2 (in m/s) =
The velocity of water in pipe 3 (in m/s) =

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

Step 2

Step 3

Step 4

Step by step

Solved in 4 steps with 3 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

Q in 1 Q 1,3 In figure, if Qin = 3 ft3/s, which :one is true Q 1,2 2 Q2,3 Q2,4 Q3,4 3 Qout (QOut = 3), (Q1,2 = 1.5), (Q1,3= 2) ft3/s (Qout=3), ( Q2,4=1.5), (Q3,4=1.5)ft3/s O (Qout = 2.5), (Q1,2=1.5), (Q1,3=1.5) ft3/s O
Please fast
please solve question 4
C2. A circular pipe 1 of 535 mm diameter branches into two pipes (pipe 2 and pipe 3) of diameters 325 mm and 180 mm respectively as shown in figure below. If the average velocity of pipe 1 and pipe 3 are 4.7 m/s and 3.85 m/s and the flow rate of pipe 2 is 1/3rd water flow in pipe 1. D2 Pipe 2 Pipe -D, Find the following: (3 Marks) O Flow rate of water through pipe 1 in m/s (m Velocity (V)) of pipe 2 in m/s (iin) Flow rate of water (Q3) through pipe 3 in m/s
Water falls into a vane and it ejected through two pipes. The inlet has a cross-sectional areas of AO and the flowrate is Q0. The exits have flow rates of Q1 and Q2, and cross-sectional areas of A1 and A2, respectively, as shown in Figure Q2. Pipes 1 and 2 are deflected at angles of 01 and 02 with respect to the horizontal, as shown. Assume that the fluid at each inlet and outlet is at atmospheric pressure. The flowrates do not change with time. 1. Find an expression for Q2 2. If the horizontal force on the vane is zero, find an expression for Q2 in terms of the other flow rates, areas and angles. 3. Find an expression for the vertical force on the vane in terms of the flow rates, areas and angles Q₂₁ 1 Ꮎ . 1 A₁ Qo Ao 0. 2 A₂ Q₂
Case 1 1.3. dia=4 mm dia=2 mm Case 2 dia=4 mm dia=2 mm A 14 mm Case 3 252523 dia=4 mm 125 dia=8 mm Conservation of Mass: Find the velocity of the flow at the outlet for each of the 3 circular tubes shown. Inlet velocity is 1 cm/s for all cases. dia=4 mm
Water falls into a vane and it ejected through two pipes. The inlet has a cross-sectional areas of Ao and the flowrate is Qo. The exits have flow rates of Q₁ and Q2, and cross- sectional areas of A₁ and A₂, respectively, as shown in Figure Q2. Pipes 1 and 2 are deflected at angles of 0₁ and 0₂ with respect to the horizontal, as shown. Assume that the fluid at each inlet and outlet is at atmospheric pressure. The flowrates do not change with time. a) Find an expression for Q2 b) If the horizontal force on the vane is zero, find an expression for Q₂ in terms of the other flow rates, areas and angles c) Find an expression for the vertical force on the vane in terms of the flow rates, areas and angles Q₁ 0₁ A₁ le Ao 10₂ A₂ 22 Figure Q2: Fluid entering a vanes and exiting in 2 directions.