Answered: The air above water is cooled as a… | bartleby

Related questions

Question

The air above water is cooled as a result of the water absorbing heat from the air. How large a volume of air would be cooled by 1 degree Celsius if 1.58kg of water increases in temperature by 2.60 degree Celsius. The density of air is 1.29 kg/m3 and the specific heat of air is 1000 J/kg oC.

Expert Solution

Step by step

Solved in 3 steps

SEE SOLUTION Check out a sample Q&A here

Blurred answer

Similar questions

When the indoor temperature of a house is 25°C and the outdoor temperature is -8°C, the inside and outside surfaces of the glass are measured to be 21.3°C and 17.3°C. If the glass has an area of 3.16 m2 and a thickness of 6.14 mm, what is the rate of heat (in W) lost though the window? {kglass = 0.78 W/m∙K}
1.2-kg of ice at -6.0°C is dropped into 5.0 L (5.566-kg) of car coolant. The initial temperature of the coolant is 25.0°C. The ice and coolant are insulated, so energy transfers to the outside is negligible. After hours, all ice melts and the final temperature of the mixture of water-coolant is 1.8°C. The specific heat of ice is 2090 J/kg °C; the specific heat of water is 4186 J/kg °C; the latent heat of fusion for water is 334000 J/kg. A. What is the energy needed for heating the ice to 0 °C? B. Determine the energy needed to melt the ice into water. C. Determine the total energy needed to heat the -6.0°C ice to 1.8°C water. (Please note: the total energy also includes the part heating water from 0.0 °C to 1.8 °C.) D. Determine the specific heat capacity of the coolant.
You wish to cool a 1.59 kg block of tin initially at 96.0°C to a temperature of 57.0°C by placing it in a container of kerosene initially at 28.0°C. Determine the volume (in L) of the liquid needed in order to accomplish this task without boiling. The density and specific heat of kerosene are respectively 820 kg/m³ and 2,010 J/(kg °C), and the specific heat of tin is 218 J/(kg °C). L Need Help? Read It
2.4 g of water was evaporated from the surface of skin. How much heat, in the unit of kJ, was transferred from the body to the water to evaporate the water completely? The temperature of the skin is 33.5°C, and the latent heat of vaporization of water at 33.5°C is 43.6 kJ/mol. Molar mass of water is 18 g/mol
A chunk of metal with a mass of 85.0 grams and a specific heat of 759 joules per kilogram·kelvin is heated to 78.9 degrees Celsius and placed in 122 milliliters of water (c = 4186 J/kg·K) at 18.6 degrees Celsius. What is the final temperature of the metal and water? Hint: The heat lost by the metal is gained by the water, so the sum of the heats is zero.
Suppose a house's walls are 13.5 cm thick and and have an average thermal conductivity twice that of glass wool. Given: Thermal Conductivity of glass wool= 0.042k Calculate the rate of heat conduction, in watts, through the house's walls. Assume there are no windows or doors. The surface area of the walls is 120 m2 and their inside surface is at 16°C, while their outside surface is at 5.15°C .
The rate of heat transfer on a cold day in the Canada through a rectangular window is 2336 W. The temperature inside the home is 20.2 °C and the temperature outside the home is -7 °C. What is the area of the room if the thickness 6.7 mm and thermal conductivity value of 0.25 W/m/°C?
On a sunny day when the outside temperature is 34.0°C, a car parked in the sun is receiving 812 watts/m2 of incoming solar radiation (Insolation). Because the car radiates heat off of a greater surface area, the car in-turn radiates off heat at a rate of 169 watts/m². If the car is considered a perfect absorber and emitter of radiative energy, what will the equilibrium temperature inside the car be? °C