= 0.54759.6Scanned by CamScanner938 Power Plant Engineering16 km. The efficiencies of turbine and generator are 93% each. The density oswater is 1025 kg/m³. Calculate (a) the quantity of water flowing through cturbine at maximum output in m/s,(b) the surface area of reservoir in km²,(c) the wash behind the embankment at full reservoir capacity,(d) energy produced in TWh per year.(1 TWh (tera-watt hour) = 10° GWh= 10° MWh= 10° kWh=10'² Wh=3.6× 10!5 ,%3D%3D%3D

The given problem relates to power generation through tidal energy. There are 140 generators which…

ter is 1025 kg/m³. Calculate (a) the quantity of water flowing through each A tidal km. The efficiencies of turbine and generator are 93% each. The density of sea perates at a maximum designed head of eration is 2 m. The number of hours of generation is on the average ycle (12 hours a day). Assume power to decrease linearly and the a rectangular cross-sectional area. The length of embankment is Scanned by CamScann Power Plant Engineering km. The efficiencies of turbine and generator are 93% each. The density of ter is 1025 kg/m'. Calculate (a) the quantity of water flowing through c bine at maximum output in m/s,

ter is 1025 kg/m³. Calculate (a) the quantity of water flowing through each A tidal km. The efficiencies of turbine and generator are 93% each. The density of sea perates at a maximum designed head of eration is 2 m. The number of hours of generation is on the average ycle (12 hours a day). Assume power to decrease linearly and the a rectangular cross-sectional area. The length of embankment is Scanned by CamScann Power Plant Engineering km. The efficiencies of turbine and generator are 93% each. The density of ter is 1025 kg/m'. Calculate (a) the quantity of water flowing through c bine at maximum output in m/s,

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

I need the answer quickly
Find the ocam diameter and actual displaced? Volumetric efficiency volume Vane pump, = 91.87%, N = 1420 rpm, e 14.67 mm, L 53.12 mm, Rotor diameter = 77.56 mm, Volume displaced = 288.43 cm³-rev1.
16
Q3) Kaplan turbine A) The runner of Kaplan turbine working under dsitance of (5.5m) to produce (9 MW). Speed ratio and flow ratio are (2.08) and (0.68) respectively. Overall efficiency is (0.85). Find diameter and speed of the runner. The hub to tip runner diameter is (1/3). Q4) Design of Kaplan turbine to work under a head of (25m) and transfer (10 MW) power the diameter of hub and tip are (1.2m) and (3m) and overall and hydraulic efficiency are (0.85) and (0.9) respectively. Find the speed and angles of velocity triangles. Hint: The velocity triangle of inlet and outlet radial flow
I want you to draw the HGL and EGL using the second picture.
A cenuifugai pump of i.3 un deiivers 3.5 n jmin vî waier ai a ip speed of 1.5 m/s. The outlet blade angle is at 30° to the tangent at the imneller nerinhery. Assuming that the water enters the imneller radially and zero slip, calculate the torque delivered by the impeller?
( Apelton wheel generates 8000 kWunder net head of 130m at speed of 200rpm-Speed ratio 0-46.jet diameter to wheel diameter ratio is 1/9 mechaincal efficiency is 75% Determine @ Discharge required Diameter of the wheel © Diameten and numberoljet required specificof speed of turbine
An external gear pump has volumetric displacement nearly 16 times of outer diameter in cm³/rev. It has inner diameter of " D;", and outer diameter (Do) of 6.5 cm. The width of the gear is 45 mm. Find the inner diameter D; and theoretical discharge, if speed of the driving gear is 1700 rpm.
Forty percent of the electrical input to a motor driven pump is converted into a hydraulic jet 0.013 m in diameter, for the purposes of washing down ashes. Find the jet velocity in m/s. The motor has a 3-phase, 220 V, 7.5 amp. rating. Power factor 85%. 53.214. m/s 52.214. m/s O 51.214. m/s 50.214. m/s
35. The intcrnal and external diameters of an inward flow reaction turbine are 0 6 metre and 1 metre respectively. The width of the wheel at inlet and outlet is 12 cms. is 9 metres and the hydraulic efficiency is 90%. The vane angle at outlet is 20°. The final discharge at outlet is radial at a velocity of 2 70 metres per second. Find (a) The guide blade angle. The head on the turbinc (6) The runner vane angle at inlet. (c) The speed of the turbine. (d) The discharge of the turbine. (e) The WHP. (14° 8' ; 164° 43'; 236 rpm; 66 hp)
B- A three-lobe rotary positive-displacement pump moves 0.45 cm³ of blood in each lobe volume Vlobe. Calculate the volume flow rate of oil for the case where n = 900 грт.
This is an easy question