Suppose your topsoil has a cation-exchage capacity of 20 cm(+)/kg soil and a bulk density of 1.41 g/cm3. What is the potential storage capacity of 7.0 inches of this topsoil for calcium? Please calculate one measure of this capacity: If the CEC were empty of calcium, then how much CaCog (in tons CaCO3/acre) would you have to add to the top 7.0 inches of soil to add 100% of the CEC as calcium?

Suppose your topsoil has a cation-exchage capacity of 20 cm(+)/kg soil and a bulk density of 1.41 g/cm3. What is the potential storage capacity of 7.0 inches of this topsoil for calcium? Please calculate one measure of this capacity: If the CEC were empty of calcium, then how much CaCog (in tons CaCO3/acre) would you have to add to the top 7.0 inches of soil to add 100% of the CEC as calcium?

Chemistry

10th Edition

ISBN:9781305957404

Author:Steven S. Zumdahl, Susan A. Zumdahl, Donald J. DeCoste

Publisher:Steven S. Zumdahl, Susan A. Zumdahl, Donald J. DeCoste

Chapter1: Chemical Foundations

Section: Chapter Questions

Problem 1RQ: Define and explain the differences between the following terms. a. law and theory b. theory and...

See similar textbooks

Similar questions

4-2b) please see attached
Calculate the molarity of a Sulfuric acid reagent (98% w/w) with a specific gravity of 1.80.
As a chemist, you are tasked to submit a written report about the key solutes dissovled in the sea, the concentration of these solutes at varying deoths and the beneficial and harmful effects of these substances to both plants and animals in the sea.
Kindly answer this question
A solution containing 78 g of NaNO3 in 70. g H2O at 50 ° C is cooled to 20 °C. Use the solubility data from the table below. Part A Solubility (g/100. g H2O) Substance 20 °C 50 °C How many grams of NaNO3 remain in solution at 20 °C? KCI 34 43 Express your answer in grams to two significant figures. NaNO3 88 110 ? C12 H22O11 (sugar) 204 260
You are required to prepare 5 L of a solution containing 1.000 x 103 mol/L of Cu2"(aq). Which of the following procedures would produce an appropriate solution? O Dissolve 0.0636 g of copper metal in nitric acid, add to a 5.000 Lvolumetric flask, dilute to the mark with deionized water and mix well. O Dissolve 1.248 g of CuSO.5H,0(s) in deionized water, add to a 5.000 L volumetric flask, dilute to the mark with deionized water and mix well. Dissolve 0.250 g of CUSO,.5H,O(s) in deionized water, add to a 5.000 L volumetric flask, dilute to the mark with deionized water and mix well.
1. The following data are from total and volatile solids tests on a wastewater. Calculate the total and volatile solids concentration in mg/L. Weight of empty dish = 68.942 g Weight of dish + dry solids = 69.053 g Weight of dish + ignited solids = 69.003 g Volume of wastewater sample = 100 mL
a dilution is needed to prepare a standard of 10 mg Zn/L from 0.5g Zn/L. To carry out the dilution we have the following available bulb pipettes: 1ml,2ml,5ml,10ml,20ml and 25 ml and the following volumetric flask: 50ml,100ml,250ml,500ml. which bulb pipette and which corresponding volumetric flask you would choose to carry out the dilution?
Grams of solute per 100 g H₂O 140 130 120 110 100 90 80 70 60 50 40 30 20 10 NH37 NaNO3 KCIO3. KNO3 NHẠC KCI Naci -Ce₂(SO4)3 0 10 20 30 40 50 60 70 80 90 100 6. How many grams of KCI can be dissolved in 100g of water at 80°C? 7. At 40°C, how much KNO3 can be dissolved in 100g of water? 8. At 30°C, 90g of NaNO3 is dissolved in 100g of water. Is this solution saturated or unsaturated? 9. How could you tell by looking at a solution that was saturated? 10. A vinegar brand contains 4% acetic acid by volume. If the density of vinegar is 1.05 g/ml, how many grams of acetic acid are in a 250.0 mL of vinegar? 19
An aqueous solution of beryllium chloride BECl2 is made by dissolving 1.25g of BECl2 in sufficient water in a 200 ml volumetric flsk and then adding enough water to fill the flask to the mark exactly. What is the weight/volume percentage beryllium chloride in the sollution?
One milliliter (mL) of pure water has a mass of 1 gram (g). You add 100 mL of water and 100 mL of an organic solvent to a separatory funnel, shake, and let settle. There will be two layers of liquids. Select the one solvent listed below that will result in the water layer being the top layer. For each solvent, density (d) is given in g/ml. Toluene (d = 0.86) Tetrahydrofuran (d = 0.88) water is never the top layer Methylene chloride (d = 1.33)
In the lead content analysis of a wastewater sample, 50.00 mL of the original sample was taken and diluted with 150.00 mL deionized water. The diluted sample was found to have a lead content of 17.8 ppb. What is the lead content (in ppb) of the original wastewater sample? DENSITY VALUES AT 25°C Ethanol: 0.789 g/mL Water: 0.997 g/mL Acetic Acid: 1.05 g/mL