You are required to prepare 5 L of a solution containing 1.000 x 103 mol/L of Cu2"(aq).Which of the following procedures would produce an appropriate solution?O Dissolve 0.0636 g of copper metal in nitric acid, add to a 5.000 Lvolumetric flask, dilute to themark with deionized water and mix well.O Dissolve 1.248 g of CuSO.5H,0(s) in deionized water, add to a 5.000 L volumetric flask, diluteto the mark with deionized water and mix well.Dissolve 0.250 g of CUSO,.5H,O(s) in deionized water, add to a 5.000 L volumetric flask, diluteto the mark with deionized water and mix well.

The molarity of a solution describes the number of moles of the solute present in one liter of…

You are required to prepare 5 L of a solution containing 1.000 x 10 mol/L of Cu2"(aq). Which of the following procedures would produce an appropriate solution? Dissolve 0.0636 g of copper metal in nitric acid, add to a 5.000 L volumetric flask, dilute to the mark with deionized water and mix well. Dissolve 1.248 g of CUSO4.5H,0(s) in deionized water, add to a 5.000 L volumetric flask, dilute to the mark with deionized water and mix well. Dissolve 0.250 g of CUSO4.5H,O(s) in deionized water, add to a 5.000 L volumetric flask, dilute to the mark with deionized water and mix well.

You are required to prepare 5 L of a solution containing 1.000 x 10 mol/L of Cu2"(aq). Which of the following procedures would produce an appropriate solution? Dissolve 0.0636 g of copper metal in nitric acid, add to a 5.000 L volumetric flask, dilute to the mark with deionized water and mix well. Dissolve 1.248 g of CUSO4.5H,0(s) in deionized water, add to a 5.000 L volumetric flask, dilute to the mark with deionized water and mix well. Dissolve 0.250 g of CUSO4.5H,O(s) in deionized water, add to a 5.000 L volumetric flask, dilute to the mark with deionized water and mix well.

Chemistry

10th Edition

ISBN:9781305957404

Author:Steven S. Zumdahl, Susan A. Zumdahl, Donald J. DeCoste

Publisher:Steven S. Zumdahl, Susan A. Zumdahl, Donald J. DeCoste

Chapter1: Chemical Foundations

Section: Chapter Questions

Problem 1RQ: Define and explain the differences between the following terms. a. law and theory b. theory and...

See similar textbooks

Similar questions

1.26 moles of copper reacts with excess nitric acid to produce 16.0L of copper (II) nitrate solution. What is the molarity of this solution? Use this Cu+4HNO3->Cu(NO3)2+2N02+2H2O
You need to prepare a solution of 0.123M CuSO4 by starting with solid CuSO4·5H2O. You would be able to use a lab scale that measures to the thousandths and any size volumetric flasks, and pipets that you would need.
1 Hydrogen peroxide solutions can easily be decomposed by dust, trace amounts of metals or light. It is therefore necessary to periodically determine the purity of the peroxide solutions. This can be done via a redox titration as follows: • The density of a particular surgical grade hydrogen peroxide solution is 1.11g.cm³. • Exactly 10 mL of this solution was pipetted and quantitatively transferred, along with a sufficient amount of a dilute sulphuric acid solution, into a 250.00 mL volumetric flask and made up to the mark. • A 25.00 mL portion of this diluted solution is pipetted into a conical flask, and titrated with a 0.372 M KMNO4 solution. • The endpoint of the titration is determined when the colourless solution in the conical flask turns a persistent bright pink due to the presence of excess permanganate ions. • The average titration value is 26.20 mL of the KMNO4 solution. The reaction stoichiometry is as follows: 2KMN0,(aq) + 3H280,(aq) + 5H20, (aq) → 2MNS0,(aq) + K2s0,(aq) +…
2.) Five standardized dilutions of aqueous lead(II) chromate solution were prepared by adding a volume of 0.0010 M PbCrOa(ag) from a buret and then diluting the solution with deionized water to a total volume of 100.0 mL. Use the provided information to determine [CrO42] in each. Hint: enter the decimal before the scientific notation. Mixture Initial Buret Reading (mL) Final Buret Reading (mL) [CrO4?] (M) 5 16.83 42.60 ? x 104
(a) You are about to prepare three solutions of 0.5 M KI, 0.01 M K2S2O8, and 0.01 M Na2S2O3*5H2O in 250 mL volumetric flasks. - Describe how you will go about this, i,e, explain all steps of weighing of solutes, volumetric measurements (filling up with deionised water) ect. Calculate what mass of solute you will need in each of solutions mentioned above that you need to prepare. Show all calculations steps. (b) You are also tasked to fill burettes with the above-mentioned solutions, however, after filling up the solutions, you realised that there is a bubble towards the bottom tip inside the burette. Is it wise to continue with the experiment, while there is a bubble, if NOT explain why. (c) According to the manual's Experimental procedure, one conical flask (flask 1) contains a mixture of 20 mL of the KI solution plus 10 mL of the Na2S2O3 solution, while in the second flask (flask 2) there is 20 mL of the K2S2O8 solution with added five drops of starch solution. Why can't you add…
The gravimetric determination of Ni: Ni (58.7 g/mol) was precipitated as Ni(DMG) 2 (288.7 g/mol). The volume of unknown solution in the sample =30.00 mL. The mass of empty crucible = 30.107 g, the mass of empty crucible and precipitate = 30.300 g. Calculate the concentration of NiT in the unknown in sample solution (in mg/L) is: 1. O2.62X103 2. O1.31X 103 3. 25.3X 104 4. 00.5X 10 Previous Next hp
A 2.00 mL aliquot of reagent grade HCl was diluted to 250.0 mL. The diluted solution was standardized using sodium carbonate, and the concentration of the prepared solution was determined to be 0.09606 M HCl. What is the concentration of reagent HCl (in %w/w)? Note: the specific gravity of the reagent HCl was 1.18 g/mL.
A 2.1182.118 g sample of a solid mixture containing only potassium carbonate (MM=138.2058 g/molMM=138.2058 g/mol) and potassium bicarbonate (MM=100.1154 g/molMM=100.1154 g/mol) is dissolved in distilled water. A volume of 30.1030.10 mL of a 0.7570.757 M HCl standard solution is required to titrate the mixture to a bromocresol green end point. Calculate the weight percent of potassium carbonate and potassium bicarbonate in the mixture.
A stock solution of potassium permanganate (KMnO4) was prepared by dissolving 17.1 g KMnO4 with DI H2Oin a 100.00-mL volumetric flask and diluting to the calibration mark. Determine the molarity of the solution.
Calculate the mass (in grams) of magnesium chloride (〖????〗_2) that would be needed to prepare 150 mL 0f a 20 % by mass aqueous solution of the salt. The density of a solution is 1.1g/mL.
The ethyl mercaptan (C2H5SH, 62.13 g/mol) concentration in a mixture was determined by shaking a 1.534 g sample with 50.0 mL of 0.01293 M I2 in a tightly stoppered flask: 2 C2H5SH (aq) + I2 (aq) --> C4H10S2 (aq) + 2 I- (aq) + 2 H+ (aq) The excess I2 was back-titrated with 15.72 mL of 0.01425 M Na2S2O3: I2 (aq) + 2 S2O32- (aq) --> 2 I- (aq) + S4O62- (aq) Calculate the percentage of ethyl mercaptan in the sample (3 sf)
Consider the following balanced equation: 2KMNO4(aq) + 10KI(aq) + 8H2SO4(aq) → 6K2SO4(aq) + 2MnSO«(s) + 512(s) + 8H2O(1) What volume of 0.205 M potassium permanganate solution would be required to completely react with 52.5 mL of 0.188 M potassium iodide solution?