Steam at a pressure of 0.08 bar and a quality of 93.2% enters a shell-and-tube heat exchanger where it condenses on the outside of tubes through which cooling water flows, exiting as saturated liquid at 0.08 bar. The mass flow rate of the condensing steam is 5.8 x 105 kg/h. Cooling water enters the tubes at 15°C and exits at 35°C with negligible change in pressure. Neglecting stray heat transfer and ignoring kinetic and potential energy effects, determine the mass flow rate of the cooling water, in kg/h, for steady-state operation. mwater = eTextbook and Media Save for Later kg/h Attempts: 0 of 5 used Submit Answer

Steam at a pressure of 0.08 bar and a quality of 93.2% enters a shell-and-tube heat exchanger where it condenses on the outside of tubes through which cooling water flows, exiting as saturated liquid at 0.08 bar. The mass flow rate of the condensing steam is 5.8 x 105 kg/h. Cooling water enters the tubes at 15°C and exits at 35°C with negligible change in pressure. Neglecting stray heat transfer and ignoring kinetic and potential energy effects, determine the mass flow rate of the cooling water, in kg/h, for steady-state operation. mwater = eTextbook and Media Save for Later kg/h Attempts: 0 of 5 used Submit Answer

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Related questions

Q: A boiler has a mass flow rate of 3 tons/hour of feed water at a temperature of 28 C and a pressure…

A: Given: The mass flow rate of water, m = 3 tons per hour The temperature of water, T = 28 C The…

Q: Turbines, compressors, boilers, condensers, and heat exchangers operate for long periods of time…

A: It is required to fill the blanks

Q: Нeat 4 Exchanger water 3 Figure 2 What is the specific isentropic work done of compressor in kJ/kg?…

A: Given data: The initial temperature of the air is T1 = 30 oC. The final temperature of the air is…

Q: Water at 910 kPa, 25°C enters a 1-m-diameter horizontal pipe with a steady velocity of 13 m/s At the…

A: P1 = 910 kPa P2 = 870 kPa Velocity = 13 m/s Diameter = 1 m

Q: A completely insulated mixing vessel is designed to deliver water at 60 ⁰C and atmospheric pressure…

Q: Steam at a pressure of 0.08 bar and a quality of 87.4% enters a shell-and-tube heat exchanger where…

A: The steam pressure is .The quality of steam entering the tube is .The mass flow rate of steam is…

Q: Octane is heated in a heat exchanger under constant pressure of 10 bar from 200 K to 400 K. Use the…

A: Introduction Entropy is a point function, which means that the value of entropy only determines the…

Q: The figure below shows a mixing tank initially containing minitial = 3000 lb of liquid water. The…

A: Given:Initial mass of water in the tank, mi=3000 lbMass flow rate of hot water, m1=0.8 lb/sMass flow…

Q: 1. Boiler. Steam at 40 bar, 350°C, is generated in a boiler at the rate of 50,000 kg/h from feed…

A: Given dataFeed water temperature = 130 °CSteam mass flow rate = 50000 kg/h = 13.889 kg/sSteam…

Q: A heat exchanger is used to heat 36 kg/hr of air originally at standard conditions (25 °C and 1 atm)…

Q: 1) Pasteurized beer (Cp = 4.2 kJ/kg °C) is being cooled in a double pipe heat exchanger. The beer…

Q: Air as ideal gas enters a compressor at inlet pressure 96 kPa, T₁ = 27C and volumetric flow rate is…

Q: An engine produces 4 MW power and has a thermal efficiency of 30%. Atmospheric air available at 300…

Q: A heat exchanger is used to heat 36 kg/hr of air originally at standard conditions (25 °C and 1 atm)…

Q: In a reversible isobaric heating process in a closed system Choose one answer in each line W12 =…

A: In a reversible isobaric process in a closed system, In a closed sytem, there is no transfer of…

Q: A small nuclear reactor is cooled by passing liquid sodium liquid sodium out of the reactor at 2 bar…

Q: A Stirling cycle operates with air with a volume flow rate of 0.5 m³/s at the beginning of…

Q: Thermodynamics 2. Determine the useful power produced in a thermally insulated turbine from 30 bar…

Question

Steam at a pressure of 0.08 bar and a quality of 93.2% enters a shell-and-tube heat exchanger where it condenses on the outside of
tubes through which cooling water flows, exiting as saturated liquid at 0.08 bar. The mass flow rate of the condensing steam is 5.8 x
105 kg/h. Cooling water enters the tubes at 15°C and exits at 35°C with negligible change in pressure.
Neglecting stray heat transfer and ignoring kinetic and potential energy effects, determine the mass flow rate of the cooling water, in
kg/h, for steady-state operation.
mwater = i
eTextbook and Media
Save for Later
kg/h
Attempts: 0 of 5 used
Submit Answer

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1: Given data

VIEW

Step 2: Solution

VIEW

Solution

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 3 steps with 2 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

A completely insulated mixing vessel is designed to deliver water at 60 ⁰Cand atmospheric pressure at a rate of 4 kg/s by mixing two streams of incomingwater in an environment at 25 ⁰C. Saturated steam at atmospheric pressure isinserted on the hot side. Two options are being considered for the cold side: (a)chilled water from the plant at 3 ⁰C or (b) water from the tap at 20 ⁰C (both atatmospheric pressure). 1. Determine the thermal efficiency of each process
1. Combustion gases enter the nozzle of a jet engine at 3.8 bar and 820°C. The nozzle is well insulated and the gases expand down to an exit pressure of 1.1 bar. Determine the temperature and the velocity of the gases at exit from the nozzle assuming the velocity at inlet is negligible. For the combustion gases take c, = 1.15 KJ/Kg. K and the ratio of specific heats = 1.32
Air at 1 bar, 27 °C, with a volumetric flow rate of 40 m³/min enters the non-mixing counterflow heat exchanger part of an air-conditioning system. This air exits the heat exchanger at 0.95 bar and 17 °C. The cooling of this air is done by a stream of refrigerant R-134a that enters the heat exchanger at 5 bar with a quality of 0.3 and exits at 5 bar and 20 °C. Determine the overall rate of entropy production during this process, in kW. The overall heat exchanger is insulated. The operation is steady state, and the effects of potential and kinetic energy are negligible.
A tomato paste containing 25% solids is heated from 30 ° C to 72 ° C. The steam used for heating enters saturated and 132 ° C and exits at 110 ° C as condensed water. Calculate the amount of steam used for the heating process. (cpTomato juice = 3.34 * ms +0.8376, H132 ° C = 2722.63 kj / kg H120 = 461.32 kj / kg) A.) 4.680 kg B.) 2.569 kg C.) 0.0311 kg D.) 1.570 kg E.) 62.20 kg
D Question 1 Use this figure for Questions 1 to 5. A hot-water stream at 90 °℃ enters an insulated mixing chamber with a mass flow rate of mh=0.75 kg/s where it is mixed with a stream of cold water at 25°℃ in a steady state steady flow process. It is desired that the mixture leaves the chamber at 45°℃ as shown in the Figure Hot water P₁=300 kPa T₁=90°C m=0.75 kg/s Cold water P-300 kPa T: 25% m=? 1 2 Mixing Chamber Mixed warm water Ps-300 kPa T=45°C m3 For Question 1: The specific enthalpy of the hot water, h1, in kJ/kg is