SHEAR AND MOMENT DIAGRAMPROBLEM 2Use the AREA method to construct the shear-force and bending-moment diagrams forthe beam shown. Let a = 6.9 ft, b = 10.4 ft, c = 5.8 ft, and w = 9.5 kips/ft. Label allsignificant points on each diagram and identify the maximum moments (both positiveand negative) along with their respective locations. Clearly differentiate straight-line andcurved portions of the diagrams. Determine the maximum shear force and bendingmoment in the beam.Note that answers may be positive or negative. Here, "maximum" refers to the largestmagnitude value, but you should enter your shear force and bending moment with thecorrect sign, using the sign convention. If the magnitudes of the largest positive andlargest negative values are the same, enter a positive number. The roller atpoint D indicates that motion is restricted both up and down, and the beam will not liftoff the roller.aBWbODX

Answered: Image /qna-images/answer/314eec5a-79e7-4d9c-b1e9-a9da202f0eae.jpg

SHEAR AND MOMENT DIAGRAM PROBLEM 2 Use the AREA method to construct the shear-force and bending-moment diagrams for the beam shown. Let a = 6.9 ft, b = 10.4 ft, c = 5.8 ft, and w = 9.5 kips/ft. Label all significant points on each diagram and identify the maximum moments (both positive and negative) along with their respective locations. Clearly differentiate straight-line and curved portions of the diagrams. Determine the maximum shear force and bending moment in the beam.

SHEAR AND MOMENT DIAGRAM PROBLEM 2 Use the AREA method to construct the shear-force and bending-moment diagrams for the beam shown. Let a = 6.9 ft, b = 10.4 ft, c = 5.8 ft, and w = 9.5 kips/ft. Label all significant points on each diagram and identify the maximum moments (both positive and negative) along with their respective locations. Clearly differentiate straight-line and curved portions of the diagrams. Determine the maximum shear force and bending moment in the beam.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Use the graphical method to construct the shear-force and bending-moment diagrams for the beam shown. Leta = 5.2 ft, w = 235 Ib/ft, Mp = 7000 lb-ft, and P = 11001b. Construct the shear-force and bending-moment diagrams on paper and use the results to answer the questions in the subsequent parts of this GO exercise. Mp Determine the bending moment acting at each of the following locations: (a) x = 5.2 ft (i.e., at point B) (b) x = 10.4 ft (i.e., at point C) (c) x = 15.6 – ft (i.e., just to the left of point D) (d) x = 15.6 + ft (i.e., just to the right of point D) (e) x = 20.8 ft (i.e., at point E) When entering your answers, use the bending moment sign convention.
Use the graphical method to construct the shear-force and bending-moment diagrams for the beam shown. Let a=4.0 ft, b=8.0 ft, c=4.0 ft, d=3.0 ft, w = 6.5 kips/ft and P = 45 kips. Construct the shear-force and bending-moment diagrams on paper and use the results to answer the questions in the subsequent parts of this GO exercise. A a B a b For this loading, calculate the reaction forces Ay and Ey acting on the beam. Positive values for the reactions are indicated by the directions of the red arrows shown on the free-body diagram below. (Note: Since Ax = 0, it has been omitted from the free-body diagram.) W B W ÎÎÎÎÎÎ b C C d E d E X Ey X
Use the graphical method to construct the shear-force and bending-moment diagrams for the beam shown. Let a = 2.2 m, b = 4.4 m, c = 3 m, P = 16 kN, w = 34 kN/m, and Q = 26 kN. Label all significant points on each diagram and identify the maximum shear force and bending moment along with their respective locations. Additionally:(a) Determine V and M in the beam at a point located 0.65 m to the right of B.(b) Determine V and M in the beam at a point located 1.40 m to the left of C.Note that answers may be positive or negative. Here, "maximum" refers to the largest magnitude value, but you should enter your shear force and bending moment with the correct sign, using the sign convention presented in Section 7.2 of the textbook. If the magnitudes of the largest positive and largest negative values are the same, enter a positive number.
Part 1 For the simply supported beam subjected to the loading shown, derive equations for the shear force V and the bending moment M for any location in the beam. (Place the origin at point A.) Let a=14.0 ft, b-6.5 ft, c= 8.0 ft, w = 11 kips/ft and M = 210 kip-ft. Construct the shear-force and bending-moment diagrams on paper and use the results to answer the questions in the subsequent parts of this GO exercise. A Correct Answers: Ay = b Calculate the reaction forces A, and Cy acting on the beam. Positive values for the reactions are indicated by the directions of the red arrows shown on the free-body diagram below. (Note: Since Ax = 0, it has been omitted from the free-body diagram.) Cy= 105.823 W 207.677 a W M a M B kips kips C b C Cy C C X
Use the graphical method to construct the shear-force and bending-moment diagrams for the beam shown. Label all significant points on each diagram and identify the maximum moments along with their respective locations. Additionally: Let a = 3.1 m, b = 5.9 m, w = 34 kN/m, P = 48 kN, Q = 34 kN, and Mc = 155 kN-m. Construct the shear-force and bending-moment diagrams P A В E Mc a b a а Determine the shear force acting at each of the following locations: (a)x = 3.1 – m (i.e., just to the left of support B) (b) x = 3.1 + m (i.e., just to the right of support B) (c)x = 12.1 – m (i.e., just to the left of support D) (d) x = 12.1 + m (i.e., just to the right of support D)
Needs Complete typed solution with 100% accuracy.
Draw the simplified free-body diagram and below it the shear and bending moment diagrams. Show all necessary solutions. Let the analysis be from left to right. Determine the points of zero shear (if any), their distance from point A, and the bending moments at these points. Indicate the value of all the points, degree of all curves, and the maximum shear and maximum bending moment of the beam. Use the method of sections. Beam ABCD has a hanger connected at B and is supported by a roller at A and a pin at C. 100 N L1 This is not your own property so do not use it in any way as if it were your own. M L1= 206 N/m L2 = 30 N/m L3 = 214 N/m ° L4 = 89 N/m M = 89 N-m A Simplified of the you to repro 3. Any rexodus ers have Exploratory Distance x= L2 1.5 m Shear (N) D This is not your own property so do not use it in any way as if it were your own. 2.5m Bending Moment (N-m) L4 с L3
50 kN *** w 1* 4 m 3 kN/m 5 75 kN 37° Draw the shear force diagram and the bending moment diagram for the anchor beam below.
QUESTION 3 If the allowable bending stresses for a beam in one application is 6 kip/in2 in tension. The cross-section of the beam is W8 x 40. If the beam is 10 foot long and simply supported and has a concentrated load applied at x = 3 ft as shown below. • Generate the shear force and bending moment diagram in terms of P; • Based on the allowable maximum bending moment you just obtained above, calculate/ input the mazimm allowable value of the load P: please, pay attention to units, and calculate your answer to 1 decimal place.. 3 ft 7 ft kip.
Please help. This problem involves bending moments and moments of inertia. I just need the moment of inertia. Thank you.
Q/ For the beams and loading shown below. A-Draw the shear force and bending-moment diagrams. B- Determine the equations of the shear force and bending-moment curves for the segments CD in Figure 2 C- Compute the bending stress at point (a) on section C. D- Determine the values and locations of the maximum tensile and compression bending stresses. Figure (2) R Point a Radius of hole: 40kN 0.5m 30 20KN/m 0.7m A B D |B 1m Im 3m Radius = R= 100 mm
6. Q1: For the beam Shown in Figure 1 (40 Points) 8kN/m 3kN/m 8kN/m 1. Find the reaction at support B RBy, the bending moment at B, and the bending moment at C. B- A 2. Draw the shear force and bending 3m 2m 2m 3m moment diagram for the beam. Figure 1 Q2: (30 Points) For the simply supported beam with loading and cross section shown in Figure 2, determine the following: 1. The location of the centroid measured 10 kN 10 kN 100 from the top fiber in (mm). 2. The moment of inertia about the 50 centroidal x axis (mm“) 3. The maximum compressive stress in 0.6m 0.6 m 0.6 m 30 30 60 30, (MPa) 4. The maximum shear stress at the neutral axis in (MPa) All cross-section 5. The average shear stress on the section dimensions in mm (MPа) If the allowable stress in tension, compression, and shear are 4 MPa, 18 MP, and 12 MPa respectively. is this Figure 2 beam safe?