S6.4 The pin-jointed space frame shown in Figure S6.4 consists of three mem- bers. The supports consist of fixed pins at nodes 1, 2, and 3, each providing three restraints. Determine the member forces produced by the 100 kip vertical load applied at node 4. 1 (0, 0, 5) 3 (0, -10,0) 2 (0, 0,-5) Figure S6.4 4 (10, 0, 0)

S6.4 The pin-jointed space frame shown in Figure S6.4 consists of three mem- bers. The supports consist of fixed pins at nodes 1, 2, and 3, each providing three restraints. Determine the member forces produced by the 100 kip vertical load applied at node 4. 1 (0, 0, 5) 3 (0, -10,0) 2 (0, 0,-5) Figure S6.4 4 (10, 0, 0)

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

The beam is supported by a pin at B and a roller at D. The applied loads shown in the figure have 180 lb/ft, and M = 2200 ft-lb. Draw the shear force and bending moment diagrams (in your homework documentation) and determine the equations for V(x) and M(x). 0 at point A at the left magnitudes F1 = 630 lb, F2 = 800 lb, w = %3D Also enter the support reactions as an intermediate check on your work. Take x edge of the beam. 2013 Michael Swanbom 1F, BY NC SA F2 M a Values for dimensions on the figure are given in the following table. Note the figure may not be to scale. Variable Value а 5.80 ft 12.2 ft 4.64 ft Support Reactions The reaction at B is lb. The reaction at D is lb. Shear Force and Bending Moment Equations In section AB: V(x)= lb and M(x)=| lb-ft. In section BC: V(x)= lb and M(x)=| lb-ft. In section CD: V(x)= lb and M(x)= lb-ft.
Problem 1. For the frame shown in the figure, determine (a) Reactions at the supports (b) Axial force, Shear Force and Bending Moment at a point on BC lying at 1m from point B 15 kN 30 kN 10 kN 10 kN 25 kN E 12 kN/m 8 kN B с pin HA Hy F 3.0 m 4.5 m 4.5 m VA 12.0 m 5.0 m 7.0 m
E213: Statics of Rigid Bodies Page 75 of 103 NORTHWEST SAMAR STATE UNTVERSITY Resitence Integrity Service Escelence STATICS OF RIGID BODIES 5. Determine the pin reactions at A and all forces acting on member DEF of the frame shown. Neglect the weights of the members. Ans. A = 60 KN, F= 28.30KN – 2.5 m- 2.5 m 0.5 m Im 40 kN D E 2 m 3 m Im
Three forces F, P, & T are concurrent at the origin and have magnitudes of a, b, & c, respectively. If these forces pass through the points Ff, Pp, Tt, respectively given shown below, find the magnitude and direction angles of their resultant. Ff (2, -3, 5) Pp ( -4, 1, 3) Tt (5, 3, -2) Ans: R = ax=
To use the equations of equilibrium for a three-dimensional object to solve for the support reactions. The plate shown in (Figure 1) is supported by a roller and a cable in the x-direction at A, a ball- and-socket joint at B, and a roller at C. A force F= 7.1 kN is applied at the centroid of the plate parallel to the yz-plane and making an angle of 0 = 36 degrees with the xy-plane. The sides AB and BC of the plate have length L= 1.5 mm What is the reaction force in the y-direction at point B? Let a positive force act in the positive y-direction What is the reaction force in the z-direction at point C? What is the reaction force in the z-direction at point A? What is the reaction force in the z-direction at point B? What is the tension Tin the cable? What is the reaction force in the x-direction at point B? Let a positive force act in the positive x-direction. D F y C B
Q.2) A bent bar ABC are supported and subjected to forces as shown below. Find the reactions on the bar at A, B and C. Neglect friction and the weight of the bars. 300 N 25% A B 1.2 m 1.2 m Smooth slot 50° 400 N 1m, 1m
A rectangular tetrahedron has six sides of length 9 cm. If a force of 600 N is applied along edge BC as As shown, determine the moment of the 600-N force about edge OA. A B 600 N
Determine the force in member JH and BH for the truss loaded and supported as shown in figure (3). Does the statically indeterminacy of the supports affect your calculation? Why? 4 m 4 m G 4 m F 4 m A 4 m B 4 m C 4 m 60° E (50+b) kN Fig.3. Q3
The truss shown below has pin support at A and roller support at B. The support A is susbjected to a vertical downward displacement of -0.5 mm and support B is susbjected to a vertical upward displacement of 0.4 mm. The cross sectional areas are 500 mm2, 250 mm2, and 1414 mm2 for element 1, 2, and 3, respectively. The length of element 1 and 2 is 10 m. Assume E = 200 GPa for all members. Calculate the horizontal and vertical displacements at node 3 of the truss. Use bar element formulation. 1 kN 3 2 kN (2) Y 45° 1 (1) A
Calculate the vertical support reaction in support A. When sketching FBD, set the positive directions of both reactions in the positive direction of y axis. Enter your answer in kN to three decimal places.
Q6.1. For the two-dimensional truss structure shown in the figure, determine all the nodal deflections and nodal forces. The support reaction forces, Rix, Rly and R3x are also indicated on this figure next to the supports. Both bar members (1) and (2) are of length 2.0 m. Each member has a cross-sectional area of 80 mm² and a modulus of elasticity of 200 GPa, Ignore the possibility of buckling in the compression members. Ans.: u2x=0.625 mm, u2y=-2.061, u3y=-0.375 mm, Rix--5 kN, R₁-3 kN, R3x=3 kN. R R RIS (1) (3) Fig. 1 3 kN 2 kN X
A truss is loaded and supported as shown in the figure. P=74kN. Determine the horizontal component of the reaction at E, the force in member GH, and the force in member CG. 4 m н 4m G 4 m F 4 m A 4 m B 4 m C 4 m D 60° Figure S56.236 E