Rusted-through brake lines are uncommon. a. True b. False A technician is diagnosing a vehicle with a braking system problem. When she removes the filler cap to check the fluid level in the master cylinder, she notices that the rubber seal on the cap is swollen and has begun to disintegrate. What could be the problem? a. water in the brake fluid b. petroleum-based lubricants in the fluid c. fluid overheating d. incorrect type of brake fluid The upward movement of the rear suspension opens the ______. a. residual pressure check valve b. metering valve c. height-sensing proportioning valve d. pressure differential valve A center high-mounted stop lamp (CHMSL) has been standard for more than 30 years. a. True b. False

Q: Technician A says that some small cracks in the accessory drive belt may be within tolerance.…

A: Technician A says that some small crack in the accessory drive belt may be within tolerance limits.…

Q: An ABS modulates brake pressure. What does this mean

A: In normal braking system when we apply brakes then the wheel gets locked and wheel starts skidding.

Q: While discussing the cause of an oil leak in an axle housing, Technician A says if the fluid leaks…

A: Technician B is correct. As the leakage in an axle housing is due to the damaged axle seals. So. the…

Q: Explain about mechanical, hydraulic and pneumatic brakes

A: To explain: Mechanical, hydraulic and pneumatic brakes.

Q: Automotive technology Backing plates, struts, levers, and other metal brake parts should be Select…

A: Given: How the various automotive parts should be cleaned.

Q: Explain the operation and maintenance considerations for the foot brake assembly from the Harrison…

A: Given Foot Brake To find Operation Maintenance

Q: A technician is inspecting a vehicle and finds the upper radiator hose is collapsed, and the cooling…

A: Given :-  A technician is inspecting a vehicle and finds the upper radiator hose is collapsed, and…

Q: Discbrake friction linings are sometimes called brake The ratio of the force required to slide one…

A: Given questions are related to IC engines and Machine design             [Note : According to…

Q: A customer comes in with an indirect TPMS, complaining that despite all the tires running low on…

A: Indirect TPMS works together with your car's Antilock Braking System's (ABS) wheel speed sensors.…

Q: how is the braking force of drum-type brakes controlled

A: Brake: The brake is defined as a machine element which is used to retard the moving member or to…

Q: echnician a says that the malfunction of the ABS can cause the control module to shut off or…

A: Who is correct?

Q: When performing the air brake system leakage test, the Certified Inspector must reject the vehicle…

A: Answer = False

Q: A buildup of brake dust and dirt between the liningand the drum is the most common cause of a __ .a.…

A: In this problem, it is asking about by which drum or surface a buildup of brake dust and dirt…

Q: Brake linings should be replaced when __ .a. linings are worn to within 1 /32 inch of a rivet headb.…

A: When brakes are exposed to wet, damp conditions, such as after a rain storm, pads may exhibit a very…

Q: Technician A says that a hard brake pedal on a vehicle with disc brakes can be caused by air in the…

A: Option d is correct. Neither A nor B.

Q: When reassembling an overhauled brake caliper: Technician A cleans brake components in dena-tured…

A: reassembling an overhauled brake calliper: Technician A cleans brake components in denatured…

Q: Technician A cleans brake components  in denatured alcohol. Technician B cleans brake components in…

A: Technician A cleans brake components in denatured alcohol. Technician B cleans brake components in…

Q: Technician A says that fixed calipers use a piston oneach side of the rotor to apply the brakes.…

A: Fixed and sliding calipers are used in the braking system as per the requirement of the system.

Q: When discussing CV axle replacement, Technician A states that once a CV boot is torn the entire CV…

A: The normal problem with CV joints is in protection of boot cracks, tears. As it happens, the grease…

Q: A vehicle with a direct TPMS just had all 4 tires replaced, yet the TPMS warning light is on.…

A: Direct TPMS. This is often the framework that utilizes sensors on each wheel to degree the tire…

Q: True or False. In some applications, the grease seal is a press-fit into the axle housing, which is…

A: Press-fit is a mechanical assembly method in which two or more parts are joined together by…

Q: Technician A says that an out-of-round drum can cause a pulsating brake pedal. Technician B says…

A: Technician A says that an out-of-round drum can cause a pulsating brake pedal. Technician B says…

Q: Instructions: Identify the brake system components in the drawing. Place the identifying letter next…

A: A - Reservior  B- Pressure chamber  C-Inlet port  D-compensating port  E-fluid outlet  F- Check…

Q: A vehicle with a direct TPMS system keeps showing “Low-Left Front Tire,” but when checked, the tire…

A: Direct TPMS. This is often the framework that utilizes sensors on each wheel to degree the tire…

Clutches, Brakes, Couplings, and Flywheels

The clutch is described as a machine element used to connect or disconnect two shafts together to transmit torque or power. The clutch works on the principles of friction. The clutch is commonly used in automobiles to transfer power from the driving shaft to the driven shaft.