Refrigerant ammonia enters the compressor of a refrigerator as superheated vapor at 0.14 MPa, -20°C at a rate of 0.04 kg/s, and leaves at 0.8 MPa, 50°C. The refrigerant is cooled in thecondenser to 0.75 MPa and is throttled to 0.14 MPa. Disregarding any heat transfer and pressure drops in the connecting lines between the components, determine the rate of heatremoval from the refrigerated space.kW

According to the problem, the refrigerant exits the evaporator as superheated vapor at 0.14 MPa and…

Refrigerant ammonia enters the compressor of a refrigerator as superheated vapor at 0.14 MPa, -20°C at a rate of 0.04 kg/s, and leaves at 0.8 MPa, 50°C. The refrigerant is cooled in condenser to 0.75 MPa and is throttled to 0.14 MPa. Disregarding any heat transfer and pressure drops in the connecting lines between the components, determine the rate of heat removal from the refrigerated space. kW

Refrigerant ammonia enters the compressor of a refrigerator as superheated vapor at 0.14 MPa, -20°C at a rate of 0.04 kg/s, and leaves at 0.8 MPa, 50°C. The refrigerant is cooled in condenser to 0.75 MPa and is throttled to 0.14 MPa. Disregarding any heat transfer and pressure drops in the connecting lines between the components, determine the rate of heat removal from the refrigerated space. kW

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Hi, can you only help with part a of the following?
Refrigerant 134-a enters the evaporator coils placed at the back of the freezer section of a household refrigerator at 100 kPa with quality of 20 percent and leaves at 100kPa and -26 C as shown in Figure 2. If the compressor consumes 600 W of power and the COP of the refrigerator is 2.2 determine: The mass flow rate of the refrigerant The rate of heat rejected to the kitchen air la Condenser W. Expansion valve 100 kPa -0.2 Compressor Evaporator e 100 kPa 260
A completely insulated mixing vessel is designed to deliver water at 60 ⁰Cand atmospheric pressure at a rate of 4 kg/s by mixing two streams of incomingwater in an environment at 25 ⁰C. Saturated steam at atmospheric pressure isinserted on the hot side. Two options are being considered for the cold side: (a)chilled water from the plant at 3 ⁰C or (b) water from the tap at 20 ⁰C (both atatmospheric pressure). 1. Determine the thermal efficiency of each process
1) Air enters an adiabatic heat exchanger (HX) with a mass flow rate of 850 kg/s at T₁ = 350°C and P₁ = 110kPa and leaves at T₂ = 60°C and P₂ = 100kPa and transfers heat to water which enters the HX as a saturated liquid at 16MPa. The water mass flow rate is 160 kg/s and it leaves the HX at 15MPa. Air has a constant specific heat of cp = 1.013 kJ/kg . K and specific heat ratio of k = 1.395. Calculate a) the temperature of water at state 4 Hot+ stream + To www ww 3 4 Cold stream
A one pass steam generator receives saturated water at 20 bar, and converting it into steam at 400°C. The mass flow rate of steam is 1200 kg/h, calculate the heat transfer in the generator.
6. Methane gas is compressed in a two-stage, double acting compressor which is electrically driven at 165 RPM. The low pressure cylinder (30 cm x 35 cm) receives 6 m³/min of gas at 96.5 kPa, 43°C and the high-pressure cylinder (20 cm x 35 cm) discharges the gas at 717 kPa. The isothermal over-all efficiency is 75%, Find (a) volumetric efficiency and (b) the kW output of the motor.
A completely insulated mixing vessel is designed to deliver water at 60 ⁰Cand atmospheric pressure at a rate of 4 kg/s by mixing two streams of incomingwater in an environment at 25 ⁰C. Saturated steam at atmospheric pressure isinserted on the hot side. Two options are being considered for the cold side: (a)chilled water from the plant at 3 ⁰C or (b) water from the tap at 20 ⁰C (both atatmospheric pressure).(i) Determine the mass flow rate of steam and chilled water in each case.(ii) Determine the thermal efficiency of each process.(iii) Determine the exergetic efficiency of each process, defined here as exergy outdivided by exergy in.(iv) Based on the previous answers, discuss which process makes better use ofavailable resources and why.
Heat is rejected from the condenser of a heat pump cycle by refrigerant-134a entering at 700 kPa and 50 ◦C at a rate of 105 kg/h and leaves as a saturated liquid. Determine (a) the temperature of R-134a at the condenser exit, (b) the volume flow rate at the exit of the condenser in L/min, (c) the COP of the heat pump if the rate of heat absorbed in the evaporator is 12,000 Btu/h.
Air enters the compressor of a gas-turbine engine at 300 K and 100 kPa, where it is compressed to 700 kPa and 580 K. Heat is transferred to air in the amount of 950 kJ/kg before it enters the turbine. For a turbine efficiency of 86 percent, determine: (a) the fraction of turbine work output used to drive the compressor, (b) the thermal efficiency.Assume: constant specific heats at 300 K.Ans: 50.1%, 29.6%
why would isentropic work and reversible work not be the same? E.g., for a pump