Raw water from Lake Limpid is treated via direct filtration and disinfection to supply 0.26 m³/s (5 MGD) to the town of Phresherville. Disinfection is performed in a 600-m³ contact basin with superior baffling. Water exiting the contact basin has a free chlorine residual of 2.0 mg/L. Is the Phresherville water treatment process in compliance with the Surface Water Treatment Rule?

Raw water from Lake Limpid is treated via direct filtration and disinfection to supply 0.26 m³/s (5 MGD) to the town of Phresherville. Disinfection is performed in a 600-m³ contact basin with superior baffling. Water exiting the contact basin has a free chlorine residual of 2.0 mg/L. Is the Phresherville water treatment process in compliance with the Surface Water Treatment Rule?

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Related questions

Q: A municipality plans to treat 2.7 ML/d of a groundwater that contains 85 µg/L of…

A: As per the company policy, only first three parts will be answered Given Data: Q = 2.7 ML/d Cin = 85…

Q: For an activated sludge basin with a flow rate of 500 L/s if the influent BOD5 = 100 mg/L, the MLVSS…

A: Given data: Flow rate of the sludge basin = 500 L/s Influent BOD5 = 100 mg/L MLVSS (X) = 3000 mg/L…

Q: oluble BOD5 = 80 mg/L Assume that the BOD5 of the suspended solids may be estimated as equal to 50%…

A: According to given data A small town has been directed to upgrade its primary wastewater treatment…

Q: Design three solids handling unit processes: (a) an anaerobic digester to treat a plant's primary…

A: a) To calculate the mass of sludge wasted that each digester will have to stabilize, we need to…

Q: 2. The average wastewater flow from a community of 20,000 is 125 gpcd. The 5 day, 20 deg C BOD is…

A: Population = 20000To Find:1) Settling tank surface area2) Settling tank diameter3) BOD removal in…

Q: A storm sewer is mixed into a small streams. the stream before the mixing point has a NaCl…

Q: The chloride concentration in a brine waste flow of 6.3 L/s is 15000 mg/L. The river flow upstream…

A: step 1-

Q: Wastewater from a primary treatment tank is to undergo secondary treatment in an activated sludge…

A: Given data-Hydraulic retention time (t) is 6hMean cell residence time is 7 daysBOD content at inlet…

Q: Three streams are mixing at a junction. The flow rate and total dissolved solids (TDS, a…

Q: Hydraulic conductivity K= 100 ft/day, Aquifer thickness B = 50ft, Hydraulic gradient J = 0.001 Plume…

A: Co-efficient of Permeability , K=100ft/d Aquifer Thickness , B=50 ft Hydraulic Gradient , j=0.001

Q: what aerobic reactor volume and operating SRT are required to treat a 20 MGD domestic wastewater…

A: Activated sludge process Assumptions All the reaction occurred in the aeration tank only The…

Q: A groundwater borehole at USM engineering campus contains 3000 mg/L of TDS. The flow is 0.32 m3 /s.…

A: Discharge, Net pressure, Water flux rate coefficient,

Q: 12.60 The aeration tank for a completely mixed aeration process is being sized for a design waste-…

A: The objective of the question is to calculate the volume of the aeration tank, aeration period, food…

Q: A WWTP with activated sludge secondary treatment receives 0.290 m / s of flow from the primary…

A: Answer We are given flow rate Qo = 0.290 m3/s microbes concentration the aeration basin X = 2500…

Q: A groundwater supply has been designated as vulnerable to fecal contamination, and the state has…

Q: A manufacturing facility that manufactures printed circuit boards puts wash water that was used to…

Q: A municipality plans to treat 2.7 ML/d of a groundwater that contains 85 µg/L of…

A: Given, Q=2.7MLD D=3.66 m W=9000 kg γb=450 kg/m3 K=470(μg/g)(L/μg)1/n 1n=0.515 Influent…

Q: 5) The town of Camp Verde has been directed to upgrade its primary Wastewater Treatment Plant (WWTP)…

A: Aeration Tank: The aeration tank is the tank in which wastewater is mixed with the sludge and it is…

Q: A complete mixed activated sludge process (CMAS) is to be designed to treat 5MGD of primary effluent…

A: To determine the minimum MCRT, we can use the following equation: MCRTmin = 1 / kd MCRTmin = 1 /…

Q: A primary wastewater treatment uses centrifugation for dewatering of primary sedimentation sludge.…

A: Given :- Average daily flow to the treatment plant = 5000 m3/d Total suspended solids in raw waste…

Q: a) A wastewater treatment plant consists of primary treatment followed by an activated-sludge…

A: Mesophilic digestion takes place in a mesophilic anaerobic digester which is an anaerobic digestion…

Q: A Reverse Osmosis treatment plant is treating salty water on a farm and operates 24 hours a day. It…

A: Data given: Capacity of treatment plant = 10000L/day Treatment capacity = 50% Rate of infiltration =…

Q: 1. It is estimated that the BOD of raw sewage received at a treatment plant serving a population of…

Q: You’re working on a preliminary design for a water treatment plant expansion for Fell City. The…

A: Given Data Discharge of water to be treated, Q=12MGD=12×10624×60=8333.33 gpmWater required for…

Q: A CMAS treatment system must be designed for a municipal wastewater and the following operating…

A: The given data is: BOD5=0.39m3/s VSS in the aeration tank=4300 mg/L 55 g VSS=100 gm soluble BODs…

Concept explainers

Storm Sewers and Detention

The storm drains system transports rainwater or stormwater and other runoff from roads, parking lots, and roof downpipes directly to nearby creeks, rivers, or the sea without any treatment.

Question

Please upload your full solution to the following problem.
Raw water from Lake Limpid is treated via direct filtration and disinfection to supply 0.26 m³/s (5
MGD) to the town of Phresherville. Disinfection is performed in a 600-m³ contact basin with superior
baffling. Water exiting the contact basin has a free chlorine residual of 2.0 mg/L. Is the Phresherville
water treatment process in compliance with the Surface Water Treatment Rule?

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1: Introduction

VIEW

Step 2: Explanation

VIEW

Solution

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 3 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, civil-engineering and related others by exploring similar questions and additional content below.

Similar questions

12.50 Determine the activated-sludge aeration volume required to treat 2.64 mgd with a BOD of 120 mg/l based on the criteria of a maximum BOD loading of 40 lb/1000 ft³/day and a minimum aeration period of 5.0 hr. Assuming an operating F/M of 0.20 lb BOD/day per lb of MLSS, calculate the MLSS to be maintained in the aeration tank. Estimate the operat- ing sludge age (mean cell residence time), assuming an effluent suspended solids of 30 mg/l and the daily amount of waste-sludge solids from Figure 13.1. Determine the diame- ter and side-water depth of two identical final clarifiers of the type shown in Figure 10.12 for this activated-sludge system.
2. The average wastewater flow from a community of 20,000 is 125 gpcd. The 5 day, 20 deg C BOD is 250 mg/L. The suspended solids content is 300 mg/L. A final plant effluent of 50 mg/L of BOD is to be achieved through the use of two sets of identical settling tanks and trickling filters operating in parallel. The settling tanks are to be designed to a standard of 1000 gpd/^2. The trickling filters are to be 6^ deep and operated at an organic loading of 55 lbm/1000^3 d. There is no recirculalon. (1) What settling tank surface area is required? In ft^2 (2) What settling tank diameter is required? In ft (3) Estimate the BOD removal in the settling tanks? In percent % (4) What is the trickling filter diameter? In ft File Explorer O Expert Q&A | Cheq... (66) These
8 Determine the solid loading rate on a secondary circular clarifier (diameter = 20 m) if the plant influent load is 2 ML/d. The recycle flow from secondary clarifier to the activated sludge system (aeration basin) is set to 10% of the influent load. It is also known that the aeration basin produces an MLSS (mixed liquor suspended solids) concentration of 3000 mg/L.
An activated sludge tank is 30 m long and 10 m wide and has an SWD of 4 m. The wastewater flow is 4.0 ML/day and Compute: a) the BOD concentration which will be applied to the aeration tank b) the food-to-microorganism ratio for the system. O a) 105 mg/L b) F/M=0.35 O a) 195 mg/L b) F/M=0.65 O a) 105 mg/L b) F/M=0.22 O a) 195 mg/L b) F/M=0.35 the raw 5-day BOD is 300 mg/L. Assuming that 35 percent of the raw BOD is removed in the primary clarifier, and the MLSS concentration is 1000 mg/L.
- An aerobic digester with a total capacity of 50,000 ft³ stabilize waste-activated sludge from an extended-aeration treatment plant without primary clarification. The average daily sludge flow pumped to the digestion tanks is 32,000 gpd with 1.5% solids, of which 65% are volatile. Calculate a) sludge detention time in the digesters b) the amount of sludge produced daily and c) the anaerobic digester dimensions. The population being served is 75,000. SS and BOD = 350 mg/l. %3D
2. The average wastewater flow from a community of 20,000 is 125 gpcd. The 5 day, 20 deg C BOD is 250 mg/L. The suspended solids content is 300 mg/L. A final plant effluent of 50 mg/L of BOD is to be achieved through the use of two sets of identical settling tanks and trickling filters operating in parallel. The settling tanks are to be designed to a standard of 1000 gpd/^2. The trickling filters are to be 6^ deep and operated at an organic loading of 55 lbm/1000^3 d. There is no recirculalon. (1) What settling tank surface area is required? In ft^2 (2) What settling tank diameter is required? In ft (3) Estimate the BOD removal in the settling tanks? In percent % (4) What is the trickling filter diameter? In ft domeved Ward
The influent suspended solids concentration to a primary settling (clarifier) tank is 300 mg/L. The average flow rate is 0.037 m3/s. If the suspended solids removal efficiency is 65 percent, how many kilograms of suspended solids are removed in the primary settling tank each day?