Question 1 A ferromagnetic core with a relative permeability of 1500 is shown in Figure 2. The dimensions are as shown in the diagram, and the depth of the core is 7 cm. The air gaps on the left and right sides of the core are 0.070 and 0.020 cm, respectively. Because of fringing effects, the effective area of the air gaps is 5 percent larger than their physical size. If there are 400 turns in the coil wrapped around the center leg of the core and if the current in the coil is 1.0 A, what is a) the flux in each of the left, center, and right legs of the core? b) the flux density in each air gap? 7 cm ст ст 30 cm 30 cm 7 cm - 0.07 cm 400 turns 30 cm 0.05 cm 7 cm Core depth = 7 cm Figure 2

Question 1 A ferromagnetic core with a relative permeability of 1500 is shown in Figure 2. The dimensions are as shown in the diagram, and the depth of the core is 7 cm. The air gaps on the left and right sides of the core are 0.070 and 0.020 cm, respectively. Because of fringing effects, the effective area of the air gaps is 5 percent larger than their physical size. If there are 400 turns in the coil wrapped around the center leg of the core and if the current in the coil is 1.0 A, what is a) the flux in each of the left, center, and right legs of the core? b) the flux density in each air gap? 7 cm ст ст 30 cm 30 cm 7 cm - 0.07 cm 400 turns 30 cm 0.05 cm 7 cm Core depth = 7 cm Figure 2

Introductory Circuit Analysis (13th Edition)

13th Edition

ISBN:9780133923605

Author:Robert L. Boylestad

Publisher:Robert L. Boylestad

Chapter1: Introduction

Section: Chapter Questions

Problem 1P: Visit your local library (at school or home) and describe the extent to which it provides literature...

See similar textbooks

Similar questions

A solenoid has a magnetic reluctance of 2.2 x 10-3. It has 300 turns and a core area of 5 sq. cm. What is the flux density when the current flowing is one (1) ampere? a. in terms Sl unit b. in terms of CGS unit
In a certain magnetic circuit, the core is represented two reluctances as shown below. Assume a relative permeability μr = 2500, and a number of turns N = 420 turns. Find the current needed to produce a flux of 15 mWb in the core. སྐ Select one: O a. i=142 mA O b.i=14.2 A c.i=1.42 A O d. None Clear my choice RI =15624 A.t/Wb Rgap = 24.2 KA.t/Wb
A coil is applied on a steel core the maximum current in the circuit is 40 A. The number of turns is 800 and mean length of the coil is 10 meters. if the area of the core is 0.2 sq.m then the flux will be mwb (consider relative permeability as 1)
The core is sheet steel. Determine the current to establish an air gap flux , is 5 x 10-3 Wb. Neglect fringing. g A = 2 x 10-2 m2 4= = 0.25 x 10-3m N= 200 d fath = = 0.25 m 4 = 0.2 m = 0.35 m %3D
For the following magnetic circuit, the flux density is 1 T and magnetic field intensity is 700 At/m. The material of the core is d C cast iron cast steel sheet steel None of the above
Please solve the problem
1. A purely resistive circuit the current is leading by 90° with respect to voltage. 2. A purely inductive circuit the current is lag behind the voltage by 90°. 3. A purely capacitive circuit the current is lead by 90° with respect to the voltage. 4. A capacitor element stored magnetic energy. 5. An inductor element stored electrical energy. 6. Resistor elements consume power. 7. Angle between current and voltage is called power. 8. The power factor angle for a purely resistive is zero. 9. The power factor angle for a purely inductive load is -90°. 10. The power factor of a purely capacitive is leading.
what is the effect of number of turns and radius in inductance
Consider the large inductor in Figure 3 with given number of turns N, core permeability μ, core cross section area A, and core diameter are given. Note that the core length l is equal to π times the core diameter. Answer the questions and pick an answer from the given choices. The coil is made up of copper wire that has a cross section area of 1 cm2, and the length of each turn is nearly equal to 1 m. Find the resistance of the coil. (Assume an operating temperature of 20o C). 1) 180.2 mΩ 2) 17.2 mΩ 3) 1.2 Ω 4) 850.5 mΩ
.
Please i need the final answer very urgent
The magnetic susceptibility of aluminium is 2.1×10-5. The permeability and relative permeability are, respectively?