Question 1 A composite component is comprised of a tube and a concentric rod running inside it, both with a length of 1.5 meters. The tube is made of copper and has inner and outer diameters of 60 mm and 100 mm, respectively, a coefficient of thermal expansion and elastic modulus of 17 x10-C and 117 GPa, respectively. The rod is made of aluminium with a diameter, coefficient of thermal expansion and elastic modulus of 50 mm, 23 x10-6C and 80 GPa, respectively. If the composite is exposed to a temperature rise of 120°C, determine: 1.1 The sense and magnitude of the stresses induced in the composite if it is not restrained. 1.2 The sense and magnitude of the stresses induced in the composite if it is partially restrained with an allowed free expansion of 0.3 mm.

Question 1 A composite component is comprised of a tube and a concentric rod running inside it, both with a length of 1.5 meters. The tube is made of copper and has inner and outer diameters of 60 mm and 100 mm, respectively, a coefficient of thermal expansion and elastic modulus of 17 x10-C and 117 GPa, respectively. The rod is made of aluminium with a diameter, coefficient of thermal expansion and elastic modulus of 50 mm, 23 x10-6C and 80 GPa, respectively. If the composite is exposed to a temperature rise of 120°C, determine: 1.1 The sense and magnitude of the stresses induced in the composite if it is not restrained. 1.2 The sense and magnitude of the stresses induced in the composite if it is partially restrained with an allowed free expansion of 0.3 mm.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Attached formula sheet Some Young’s moduli (GPa) Aluminum 69 Brass 100 Steel 200 Gold 74 Rubber 0.01 Some linear coefficients of thermal expansion (in 10- 6m/m°C) Aluminum Brass Steel Gold Rubber 21-21 18-19 10-12.5 14 80
(b) If a steel shaft of diameter 50 mm is subjected to cooling within the steel of 80 °C, determine the diameter of hole that the shaft can be inserted into. Take the coefficient of linear expansion of steel to be 15 x 10-6 K-1.
L b F What is the change in length (L) of the titanium bar (E = 16.5E6 psi) given: L = 36 in., b = 3 in., h = 0.25 in, and F = 3 kips Answer to above question is 8.72E-3 in, the shear modulus for the bar is 6.145E6 psi, poisons ratio is 0.343. My question is what is the strain (in macrostrain) in the bar in a direction perpendicular to the direction of the applied force? (Answer is 82.8, I need to understand how to reach this answer.)
Just want to understand this review example
Mechanical engineering. A steel beam is installed in a building when the ambient temperature is -12C. If the beam if fixed at it's ends (prevented from expanding/contracting), calculate the stress that will develop in the beam if the ambient temperature rises to +32C. State whether the stress is tension or compression. Assume E 200,000 MPa and \alpha L = 12x10-6 (/\deg C)
A spherical gas-storage tank with an inside diameter of 32 ft is being constructed to store gas under an internal pressure of 174 psi. The tank will be constructed from structural steel that has a yield strength of 33 ksi. If a factor of safety of 3.0 with respect to the yield strength is required, determine the minimum wall thickness required for the spherical tank. O 1.52 in. O 0.92 in. O 1.24 in. O 1.91 in. O 1.60 in.
C A cantilever beam is subjected to a downward force of 5 kN at its free end, as shown in Fig. 1. The beam is supported by a circular bracket (BD) attached to a wall. The bracket is made of ductile steel whose elastic limit is 300 MPa, both in tension and compression. Determine the diameter of supporting post using Von-Mises theory. (Hint: Neglected the weight of the beam, the ends B and D are welded) Fig.3 3 m B 2 m 2 m 2 m 5 kN
Determine the elongation of an aluminium hollow cylinder of an inner diameter of 1.22 cm & the external diameter of 23.4 mm is subjected to an elastic tensile load of 228 kN. Take the elastic modulus of the aluminum specimen as 71 GPa and the initial length of the hollow cylinder as 187 mm. Solution: i) Cross-sectional Area (in mm2) = ii) Stress-induced (in N/mm2) = iii) Strain-induced (at least 3 decimal places accuracy)= iv) Elongation (in mm) =
I need the answer as soon as possible
5. In the CN Railwayproject,steel railroad rails of 9.5meters long are to be installed.If the modulus of elasticity of steel is207GPa, and if the lowest temperature considered is 18°C and a maximum temperature of 36°C is designed for, determine the clearance between the rails such that adjoining will just touch at maximum design temperature. Assume α for steel is 11.6 x 10-6/°C
Its urgent
answer and show solution