Q1/ For the plan shown below; determine quantity of foundation only for masonry in cement mortar with width of 0.6m, by Long wall - short wall method. 3.20 3.70 0.60 1.70- 3.10 0.90 -1.95- Figure 1: Plan of the house -3.60 0.30- 3.00 0.45- GL 0.60- 0.20 -0.10 0.10 0.60 Masonry in 0.50cement mortar 0.30Lean concrete 10.90 Figure 2: Cross section of the foundation and wall of the Figure 1

Q1/ For the plan shown below; determine quantity of foundation only for masonry in cement mortar with width of 0.6m, by Long wall - short wall method. 3.20 3.70 0.60 1.70- 3.10 0.90 -1.95- Figure 1: Plan of the house -3.60 0.30- 3.00 0.45- GL 0.60- 0.20 -0.10 0.10 0.60 Masonry in 0.50cement mortar 0.30Lean concrete 10.90 Figure 2: Cross section of the foundation and wall of the Figure 1

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

1. Design a two-way slab having a dimension of 3m x 4m. The slab is to carry a uniform live load of 1900 Pa. Assume fc' fy = 27.6 MPa and 280 MPa for main bars. The slab is exposed to earth or weather. Use Unit weight of concrete yc = 23.5kN/m³ 3m 3m 3m 4m 4m 4m
Design Data: Concrete cover 35 mm Assume foundation thickness is 560 mm Diameter of main reinforcement in both direction = 25 mm Dimension of footing are 2.25 m x 2.25 m 5.06 m DL = 1000 kN LL = 300 kN - 2.25 m
The type of foundation classified based on a. Length / Breadth Ratio b. Depth / Breadth Ratio O . Breadth / Depth Ratio d. Depth / Length Ratio
Given: How much concrete will you need for a 32' x 52' x 6" slab pour supported by a 3' deep x 18" trench wall and 1'x 3' trench footings. Stem wall/footings will be formed around the periphery of the slab & w/in two interior grade beams. For a w/c of 0.5, what is the weight of cement and water? Assume the wet weight of the concrete is 137 Ibs/ft3, water is 62.4 lbs/ft3 and M15 mix. Solution: ?
2. A masonry terrace of 85mm thick concrete surface with 35mm thick cement tiles rest on 200mm x 250mm timber spaced at 350mm on centers acting as simple beam with effective span of 3.8 meters. Weight of wood is 9.5Kn/M^3 and masonry to be 20KN/m^3. Ew = 13.8GPA. %3D CEMENT TILES Given: 65 %3D Allowable stresses for bending = 14 MPa Seil 250 For shear parallel to the grain = 0.9 MPa FLOOR 200 01ST Deflection = 1/360 of span %3D 250 350 200 a. Determine the uniform load it could support with respect to bending. b. Determine the uniform load it could support with respect to shear. c. Determine the uniform load it could support with respect to deflection.
a square footing 2.4 m x 0.34 m thick supports a 300 mm square column at its center. column loads are at service conditions dl = 346 kn, ll = 231 kn, fc' = 21 mpa, and fy = 415 mpa. concrete cover to the centroid of steel reinforcement is 100 mm. calculate the nominal one way shear stress in the slab
2. Design a one-way slab to carry a service live load of 4000 Pa. The slab has a length of 4m with both ends continuous. Assume f'c = 21MPa and fy = 415 MPa for main bars and fy=276 MPa for temperature bars. Unit weight of concrete is 23.5 kN/m³.
Please solve completely and give stepwise solution. ACI- 318 Question:2 A one-way slab is supporting a uniform service dead load (excluding self-weight) of 50 psf and a uniform service live load of 40 psf as shown in Fig. 02. It is required to; (a) Analyze the given slab for flexure. (b) Design the given slab for flexure. Use only # 4 bar for flexure. Take fe' = 3 ksi and fy = 40 ksi. 12" Slab 12.75' Figure 02.
Describe about the Floating Foundations.
a square footing 2.4 m x 2.4 m x 0.45 m thick supports a 300 mm square column at its center. column loads are at service conditions dl = 346 kn, ll = 231 kn, fc' = 21 mpa, and fy = 415 mpa. concrete cover to the centroid of steel reinforcement is 100 mm. calculate the nominal one way shear stress in the slab
Determine the maximum aggregate size (MAS) for an 18" wide foundation wall that has two layers of rebars. It is comprised of number 4 rebar at 6" on center in the horizontal direction and number 6 rebar spaced at 2" on center in the vertical direction. It has 1.5" clear cover on the side of the wall
Beams and Slab y Footings Columns Number of cement bags Weight of one cement Required water/cement ratio 0.41 21 bags 16 bags 10 bags 40 kgs 50 kgs 31 kgs 0.51 0.38 Determine the volume of water (drum) required for hydration for the respective concrete pouring given the corresponding water/cement ratio and weight of cement. 1 m^3 = 5 drums. a.Determine the required volume of water for the concrete pouring of beams and slab. b.Determine the required volume of water for the concrete pouring of columns.