Q.1\ A column of a cross-section (350x450)mm is reinforced with 4 bars of (25mm) in diam., knowing that Es=200,000MPa and Ec 22,500MPa and f28MPa and fy = 420 MPa determine the following: 1. The axial load that will stress the concrete to 10 MPa. 2. The normal axial compression strength.

Q.1\ A column of a cross-section (350x450)mm is reinforced with 4 bars of (25mm) in diam., knowing that Es=200,000MPa and Ec 22,500MPa and f28MPa and fy = 420 MPa determine the following: 1. The axial load that will stress the concrete to 10 MPa. 2. The normal axial compression strength.

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Related questions

Q: 3-1. A concrete cylinder having a diameter of 6.00 in. and gage length of 12 in. is tested in…

Q: Concrete is required for walls of a building that will be moderately exposed to Intrained freezing…

Q: SITUATION IIl: A reinforced concrete beam with a cross-section of 250mm x 460mm (60 mm steel cover).…

Q: Select the reinforcement at end faces of the column shown in Figure 2 if Pn = 1200 kN , ex = 300 mm,…

A: The values and diagram given in the question are as follows: Load on column(Pn)=1200 kN or 1200*103…

Q: Help

A: Given: steel in tension zone: n = 6 bars dia. = 40 mm Beam section: b = 300 mm h = 585 mm L = 8000 m…

Q: Problem 2: If f = 3 ksi what is the modulus of elasticity Ec and the maximum tensile stress fr that…

A: f'c = 3 ksi or 3000 psi We need to calculate modulus of elasticity Ec and tensile stress fr

Q: The following geomotry and basic clata for a concrete The dam s are given In reservoir figure below.…

A: Consider unit length of the dam.

Q: A simply supported beam has a section given in (a), with normal-weight concrete compressive strength…

A: Given bw=12''d=24''fc1=4.5 ksifyt=40 ksi Consider the free body diagram; Calculate factored load…

Q: Item 5 Column AB is made from high strength pre-cast concrete and reinforced with four in. diameter…

Q: In the extreme fiber of a concrete beam, the value of compression is 5.80 MPa. The neutral axis of…

A: Given: Compressive stress = 5.80 MPa Depth of neutral axis, y = 58 mm Compressive strength of…

Q: An HSS9 x 7 x3⁄8 filled with concrete is used as a composite column, as shown in Figure. The steel…

A: Pu=1.2PD+1.6PL Here PD=65 Ksi PL=130 Ksi Pu=1.2(65)+1.6(130)=286 Kips

Concept explainers

Design criteria for structural loading

The different loads such as loads due to self-weight (dead load) and external loads such as live load, wind loads, seismic load, snow load, and other loads and load combinations that influence the design of a building are called structural loading. The nature of the applied load differs from changes in the location, design, and type of materials used. The design criteria require that structures must be designed and constructed to be able to withstand all load types that are expected to act upon the structure and render its usage for the designated purpose. The structural members such as beams, slabs, columns, and foundations help the structure to withstand the applied load. There are different institutes such as ASCE and ACI that provide building design codes to assure minimum safety requirements and quality of the structures.

Question

Q.1\ A column of a cross-section (350x450)mm is reinforced with 4 bars of
(25mm) in diam., knowing that Es=200,000MPa and Ec 22,500MPa and
f28MPa and fy = 420 MPa determine the following:
1. The axial load that will stress the concrete to 10 MPa.
2. The normal axial compression strength.

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step by step

Solved in 2 steps with 2 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, civil-engineering and related others by exploring similar questions and additional content below.

Similar questions

21. The column of reinforced concrete is loaded with P = 8000 lbs. The modulus of elasticity (E) is 4.2E6 psi and the Poisson ratio is 0.15. 16in 16in What is the normal stress along section b-b? a. -15.625 psi b. -7.81 psi c. -2.60 psi d. -11.04 psi
The flexural tensile strength of M25 grade of concrete, in N/mm², as per IS:456-2000 is A 0.5 B 5 C 2.25 D 3.5
Using a simply supported pre-stressed concrete beam, explain the following status using stress diagrams: Stress condition due to pre-stress alone. Change of stress conditions due to the increment of external load: Decompression moment (bottom fibre compression = 0); Cracking moment (tensile strength develops at the bottom and starts cracking at the bottom); and Balance state (whole section is at an equal amount of compression).
Hope your help concrete design CE 410 thanks
Number 1 (parts i, ii, iii) please :)
A rectangular beam has the dimensions (see Figure) b = 12 in., h - 20 in, and d 17 in. and is reinforced with three No. 9 (No. 29) bars so that As - 3.00 in. The concrete compressive strength fe is 4000 psi, and the tensile strength In bending (modulus of rupture) is 475 psi. The yield point of the steel f, is 60,000 psi. Determine the concrete compression stress at the top fiber caused by a bending moment M- 10 ft-kips. 9- 6.78 in, I= 4067 in, Es= 29000000, E = 3600000 17 in. 20 in. 3 #9 bars (A, - 3.00 in.?) 3 in. -12 in- Select one: a. 390 psi b. 1390 psi c. 200 psi d. 250 psi
PROBLEM TO SOLVE: 600 mm 400 mm 6-25mm diam. 90 mm Using fc' = 28 MPa, Mmax = +320 kNm Determine the following: a. Cracking Moment (kNm) b. Compressive Stress felt by concrete (MPa) c. Tension Stress felt by the tension bars (MPa) d. Moment of Inertia under critical condition e. Demand Capacity Ratio of Concrete under Compression Stress f. Compression force on concrete (kN) g. Distance of the compression concrete force from the neutral axis (mm)
Help 35 minutes
1- Daw the strain and stress diagrams for untracked plain concrete shown below. Developed the tension and compression expressions? Materials are given as: f'c=X1 MPa, fr=0.07X1 MPa X1=72.1 X2=620.4 X3=144.2 X3 mm 1- Consider a rectangular column subjected to axial compression. The material stress-strain relationships have been idealized as shown below. a) What axial load will cause concrete to be at its maximum working stress? b) find the axial load P which produces & = & = 0.0012 1.75 X3
Given the following properties of a rectangular concrete beam: b = 300mm, d = 425mm, f’c = 28 MPa, fy = 415 MPa. The beam is reinforced for tension only. when the beam is reinforced with four 25mm diameter bars. Determine the steel ratio.