Problem 7.56 Hot water at 50 °C is routed from one building in which it is generated to an adjoining building in which it is used for space heating. Transfer between the buildings occurs in a steel pipe ( k = 60W / m² K ) of 100-mm outside diameter and 8-mm wall thickness. During the winter, representative environmental conditions involve air at T, =-5 °C and V =3m/s in cross flow over the pipe. a) If the cost of producing the hot water is $0.10 per kW.h, what is the representative daily cost of heat loss from an uninsulated pipe to the air per meter of pipe length? The convection resistance associated with water flow in the pipe may be neglected. b) Determine the savings associated with application of a 10-mm-thick coating of urethane ( k=0.026 W / m.K ) to the outer surface of the pipe.

Problem 7.56 Hot water at 50 °C is routed from one building in which it is generated to an adjoining building in which it is used for space heating. Transfer between the buildings occurs in a steel pipe ( k = 60W / m² K ) of 100-mm outside diameter and 8-mm wall thickness. During the winter, representative environmental conditions involve air at T, =-5 °C and V =3m/s in cross flow over the pipe. a) If the cost of producing the hot water is $0.10 per kW.h, what is the representative daily cost of heat loss from an uninsulated pipe to the air per meter of pipe length? The convection resistance associated with water flow in the pipe may be neglected. b) Determine the savings associated with application of a 10-mm-thick coating of urethane ( k=0.026 W / m.K ) to the outer surface of the pipe.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A steam generator generates flue gas at an average temperature of 260 C inside a Chimney. The theoretical draft is 0.5 kPa and the ambient condition of the air is 21 C and 100 kPa. Assume the coefficient velocity to be 0.30 and the molecular weight of the flue gas is 32. For air-fuel ratio requirements per second of 15, calculate: a. The diameter of the Chimney, meter b. The theoretical draft, cm H₂O
Q10) A1.8 m-diameter spherical tank of negligible thickness contains iced water at 0ºC. Air at 25°C flows over the tank with a velocity of 7 m/s. Determine the rate of heat transfer to the tank. oun
Please solve it for me.
A large tank containing water of constant density 1000 kg/m³ is fixed to a cart with frictionless wheels as shown in Figure 4(a). Located 1.0 m below the water's free surface is a smoothly contoured nozzle of 20 mm diameter, where jet of water is issued. horizontally with a velocity V. The water level in the tank is kept constant by continuously injecting water vertically through a 50 mm diameter downpipe above the top of the tank. The horizontal water jet from the nozzle impinges on a deflector, which redirects the water jet through an angle of 55°. The deflector is mounted rigidly on a separate cart with frictionless wheels, and is held stationary by a spring (A) connected to a sidewall as shown in the figure. The cart with the water tank is held stationary by spring (B) attached to another wall. (a) (b) (c) (d) (e) Determine the velocity of water (U) from the downpipe in order to maintain constant height of water in the tank. Determine the force exerted by spring A to keep the cart…
.5 The head loss in a sudden expansion from 6 cm diameter pipe to 12 cm diameter pipe in terms of velocity V, in the smaller diameter pipe is
2. A pipe 50 cm in diameter, has a "honeycomb" filter made of thin straws 30 cm in length and 4 mm in diameter. The inlet flow is as at 110 kPa at 20°C, at an average velocity of 6 m/s. Calculate the pressure drop across the filter. Thousands of straws 50 6 m/s cm 30 cm
SOLVE STEP BY STEP DONT USE CHATGPT Through a metal pipe (k=25 J/s m °C) with an internal diameter of 2.5 cm and a wall thickness equal to 2.5 mm, water flows with a speed of 0.25 kg/s entering at 25 °C. The pipe passes through a furnace where the air is at 125 °C and the path is 2.5 m. Outside, convection develops with (he =35 J/s.m^2.°C), while inside convection occurs with (hi= 958 W/m^2.°C). Determine the outlet temperature of the water.
Compare the frictional pressure drop, due to skin friction, of air and water for a smooth circular pipe of inside diameter D and length L. For this comparison, consider the mass flow rate of air to be equal to the mass flow rate of water [Ans.: Using the McAdams’ correlation for f we find, ∆Pa/∆Pw = (ρw/ρa)1.2].
2.1 Draught produced by stack 30 meters high for maximum rate of discharge of hot gases through-it at 27°C is (a) 17.65 mm H,0 (b) 35.5 mm H,0 (c) 30 mm H,0 (d) Not possibte.to find with the data
A sphere and a circular cylinder (with its axis perpendicular to the flow) are mounted in the same freestream. A pressure tap exists at the top of the sphere, and this is connected via a tube to one side of a manometer. The other side of the manometer is connected to a pressure tap on the surface of the cylinder. This tap is located on the cylindrical surface such that the deflection of the fluid in the manometer indicates that the pressure coefficient over the cylinder is 20% greater than that for the sphere. Calculate the location of this tap. (Round the final answer to two decimal places.) The pressure tap on the cylinder must be located at an angular position .............. above or below the stagnation point.
In an air conditioning system. Hot air (H= 1.8x10^-5 and p= 1.2 kg/m^3) at 35°C is transmitted through a smooth vertical pipeline having a diameter of 10 cm at length of 10m. Flow is upward in the pipeline steady uniform and turbulent with an applied pressure gradient of 16 pa/m. Calculate: a) Reynolds number of flow b) Amount of power used for air flow c) Shear stress velocity
A) Water at 70 °C flows up a 50-ft-long conical pipe with its centerline sloping at 5° to the horizontal, as shown in figure (1). At its lower end the diameter is 24 in, the water pressure is 15 psi; at its upper; outlet end the diameter is 18 in and the water pressure is 12.5 psi. By a method, the shear stress found to be 0.25 lb/ft². Assuming this value to be non-varying, calculate the flow rate. given = 62.30 lb/ft³. 18 in dia fo ft 24 in dia 2₁-0.25 16/12² 15 pi Figure (1) 12.6 pri