Problem 2. MAIL INVA Water initially at x = 40% is contained in a piston /cylinder arrangement with stops as shown in the figure. The diameter of the piston is 20 cm, and its mass is 15 kg. The initial and final positions of the piston are shown on the figure. The water is allowed to heat at constant pressure until the piston hits the stops. Then the water continues to heat at constant volume until the pressure is 300 kPa. The atmospheric pressure is 100 kPa and standard gravity g = 9.81 m/s². 1. Find the work and heat transfer for the overall process. 2. Find the temperature at state 2. 3. Plot P-v and T-v diagrams. Patm= 100 kPa 10 cm 3 cm Diameter = 20 cm Mass = 15 kg Initial quality x₁ = 40%

Problem 2. MAIL INVA Water initially at x = 40% is contained in a piston /cylinder arrangement with stops as shown in the figure. The diameter of the piston is 20 cm, and its mass is 15 kg. The initial and final positions of the piston are shown on the figure. The water is allowed to heat at constant pressure until the piston hits the stops. Then the water continues to heat at constant volume until the pressure is 300 kPa. The atmospheric pressure is 100 kPa and standard gravity g = 9.81 m/s². 1. Find the work and heat transfer for the overall process. 2. Find the temperature at state 2. 3. Plot P-v and T-v diagrams. Patm= 100 kPa 10 cm 3 cm Diameter = 20 cm Mass = 15 kg Initial quality x₁ = 40%

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

quick please
Use the equations of isothermal process to answer the simple questions below. 3. During an isothermal expansion the volume increases from 2.3 m³ to 6.7 m. The initiał pressure was observed to be 45 kPag. For a nonflow process, what is the work done in k?
I am stuck on this question, please explain. Thank you!
Shown in the figure, an insulated rigid tank is divided into two equal parts by a partition. Initially, one part contains an indeal gas, and the other part is evacuated. The partition is then removed, and the gas expands into the entire tank. At the initial state, the mass of the gas is m= 4.00kg, initial pressure is p1 = 600.00 kPa, initial temperature is T1 = 300.00 K. The gas constant is R = 0.2870 kJ/(kg·K). (The internal energy can be determined by the equation ΔU=m·cv·(T2-T1), where cv = 0.7180 kJ/(kg·K) is the specific heat at the constant volume.) Calculate the final state temperature T2.__________ (K)
Shown in the figure, an insulated rigid tank is divided into two equal parts by a partition. Initially, one part contains an indeal gas, and the other part is evacuated. The partition is then removed, and the gas expands into the entire tank. At the initial state, the mass of the gas is m= 4.00kg, initial pressure is p1 = 600.00 kPa, initial temperature is T1 = 300.00 K. The gas constant is R = 0.2870 kJ/(kg·K). (The internal energy can be determined by the equation ΔU=m·cv·(T2-T1), where cv = 0.7180 kJ/(kg·K) is the specific heat at the constant volume.) Calculate the final state pressure p2.__________ (kPa)
THERMOFLUID A frictionless piston-cylinder contains 3.30 kg of saturated water at 1 MPa. The water is expanded at constant pressure until its temperature rises to 270 °C. The image of the system and process are shown in Figure 3. Determine: iii) final state of water in cylinder after expansion process, and show your evidence.
answer d
2) Two glass bulbs, one on the left with a volume of 2 liters and the other on the right with avolume of 6 liters, are connected to one another by a thin tube that is initially closed by astopcock. The bulb on the left has 0.1 moles of ideal gas, and the bulb on the right isevacuated. The system is in thermal equilibrium with the surroundings at 300K. When thestopcock is opened, the gas flows out to fill both bulbs. Calculate A for this process. If wewere to insert a propeller to extract work as the gas flows from left to right, what is themaximum amount of work that we could possibly extract?
X=6
2. In a free-moving piston-cylinder assembly with a pressure of 60 kPa and a temperature of -20°C100 grams of R-134a is initially retained. until the assembly temperature is 100°C.is heated. Calculate the volumetric change after heating.
I need the answer as soon as possible
A closed rigid tank initially contains 1 kg of air at 30 C. 91 kJ of heat is then added slowly to the air. Given that C, and C of the 0.7 kJ/kg.K, and respectively. Calculate the final temperature d. 1.0 kJ/K, air are (in C) of the air. Select one: 160 O 130 70 190