Problem # 2 A cantilever beam, 75 mm wide by 200 mm high and 6 m long carries a load that varies uniformly from zero at the free end to 1500 N/m at the wall. (a) Compute the magnitude and location of the maximum flexural stress; (b) Determine the type and magnitude of the stress in a fiber 25 mm from the top of the beam at section 2.5 m from the free end.

Problem # 2 A cantilever beam, 75 mm wide by 200 mm high and 6 m long carries a load that varies uniformly from zero at the free end to 1500 N/m at the wall. (a) Compute the magnitude and location of the maximum flexural stress; (b) Determine the type and magnitude of the stress in a fiber 25 mm from the top of the beam at section 2.5 m from the free end.

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter6: Stresses In Beams (advanced Topics)

Section: Chapter Questions

Problem 6.2.15P: -15 A composite beam is constructed froma wood beam (3 in. x 6 in.) and a steel plate (3 in, wide)....

See similar textbooks

Related questions

Q: Problem 1: The steel beam is constructed by welding three rectangular pieces into a complex cross…

A: Disclaimer: “Since you have posted a question with multiple sub-parts, we will solve the first three…

Q: 8. A steel beam of uniform cross-section is 6.5 m long and weighs 300 N/rn of length. There are two…

Q: The beam shown in (Figure 1) weighs 320 lb/ft . Determine the magnitude of the internal normal force…

A: Given data:The weight of the beam per unit length, W = 320 lb/ft.

Q: A brass strip, 50 mm x 12 mm in section, is riveted to a steel strip, Figure (22) 65 mm x 10 mm in…

A: Question (a) is Solved here. For Question (b), Please post this question again.

Q: A simply supported rectangular beam 50 mm wide by 100 mm deep carries a uniform load of 1200 N/m…

Q: A wooden cantilever 2 m long having a rectangu- lar cross-section 120 × 200 mm² is loaded by a…

A: We know that a 2 m long wooden cantilever with a rectangular cross section of 120 mm is loaded at…

Q: A beam of rectangular cross-section is 64 mm broad, 100 mm deep, and 1.6 m long. It is simply…

A: Given that, Length of beam, L=1.6 m,Breadth of beam, b=64 mm,Depth of beam, d=100 mm,Load at the mid…

Q: A 4-m long simply supported beam has a section modulus of 1408 x 10³ mm³. The allowable stress in…

A: L=4 msection modulus z=1408×103 mm3σallowable=100 Mpa

Q: Determine the maximum tensile and compressive stresses developed in the overhanging beam that is…

Q: a simply supported beam 50 mm wide by 100 mm high and 3.6m and is subjected to a concentrated load…

A: Solution: A is assume as left support & B as right support. The reaction at the support is…

Q: A reinforced concrete T-beam carries a uniformly distributed super-load on a simply supported span…

Q: Consider a beam with boundary conditions, loading, and cross-section given below. In addition to the…

A: GIVEN: *P=5 kips=5 Kips = 22.2411 kN *M=144 k-in=16.2698 kNm TO FIND: (a) The normal (flexural)…

Q: Calculate the end bearing length (in.) required for a 10-in.-by-16-in. timber beam (dressed) that is…

Q: 2. Calculate the maximum shear and maximum moment for the following load diagram. (show all your…

Q: For the cantilever beam arrangement shown below, address the following: (a) Determine the forces…

Q: Your answer is partially correct. For the simply supported beam subjected to the loading shown,…

Q: A simply supported 3 m long beam with a point load of 5 kN and a cross section of 50 mm * 80 mm is…

Q: 1. A beam of length L is simply supported shown as follows. A concentrated force F is applied at…

Q: Figure 2 shows a built-up cross-section of a horizontal beam which has a maximum shear force of 100…

Q: For a steel circular cantilever beam, 10mm in diameter, 700mm in length with an applied load of…

A: M= (3/4 My + 1/3 Mp)My = 24543.5 N.mmMp = 41666.66667 N.mmYield strength= 250 MPad = 10 mmy = d/2F =…

Q: Question 5 Calculate the maximum longitudinal direct stress, plot the stress distribution diagram…

Q: A simply supported beam, 50mm wide by 100mm high and 300 mm long is subjected to a concentrated load…

Q: Derive the formula for the bending stress of a beam with a rectangular cross section and triangular…

A: Derive the formula for the bending stress of a beam with a rectangular cross section and triangular…

Q: 2. A simply supported rectangular concrete beam of span 8m has to be prestressed with a force of…

Q: A circular solid cross-section cantilever is fixed at one end and bears a concentrated load P at the…

A: Given Load, P = 30 kN Length, l = 2 m Find Maximum bending stress

Q: Figure Q2 shows the cross section of a beam. The beam is simply supported over a span of 6 m and…

Q: Determine the magnitude, type and location of the maximum flexural stress

Q: A steel bar 140mm diameter is used to support a pulley block.if the bar is simply supported over a…

Q: Analyze the beam for stresses at point A and B due to combined effect of loading. Force F is equal…

A: Given Data F=5000 lbs P=3500 lbs Now resolve the component of forces on the beam Now the angle…

Q: A helical spring used in an automobile suspension is having a wire diameter of 7mm and an outside…

Q: If the shear force is 50 kN, calculate the shear load per metre length at the top of the flange of…

Question

Problem # 2
A cantilever beam, 75 mm wide by 200 mm high and
6 m long carries a load that varies uniformly from
zero at the free end to 1500 N/m at the wall. (a)
Compute the magnitude and location of the
maximum flexural stress; (b) Determine the type and
magnitude of the stress in a fiber 25 mm from the top
of the beam at section 2.5 m from the free end.

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1: Given

VIEW

Step 2: Calculating maximum flexural stress

VIEW

Step 3: Calculating magnitude of the stress.

VIEW

Solution

VIEW

Step by step

Solved in 4 steps with 3 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

-15 A composite beam is constructed froma wood beam (3 in. x 6 in.) and a steel plate (3 in, wide). The wood and the steel are securely fastened to act as a single beam. The beam is subjected to a positive bending moment M. = 75 kip-in. Calculate the required thickness of the steel plate based on the following limit states: Allowable compressive stress in the wood = 2 ksi Allowable tensile stress in the wood = 2 ksi Allowable tensile stress in the steel plate = 16 ksi Assume that Ew= 1,500 ksi and es= 30,000 ksi.
Solve following the problems below and show your complete, systematic and neat solution. Upload your solution with one PDF file. 1. For the beam shown, a. determine the maximum flexural stresses in compression ant tension. b. determine the flexural stress of the fiber located at 3m from the left support and 50 mm above the bottom 18 kN/m 300 mm 6 kN/m 20 mm 27 kNm 22 2m 2m 3 m +m 15 mm - - 50 mm 360 mm 20 mm
4) A composite section 2 m in length, consisting of a steel tube with outer diameter 24 m and thickness 3 mm, enclaves a solid copper har 18 mm diameter. An axial compressive load of 250 KN is applied on the assembly, Young's modulus for steel and copper are taken a 2 x 10 N/mn und I x 10 Ntm respectively. Calculate the stresses developed in stoel and ccipper. Also caleulate the load taken by both the materials.
None
A wooden cantilever 2 m long having a rectangu- lar cross-section 120 x 200 mm² is loaded by a concentrated force of 2.5 kN at the free end. The load lies in the transverse plane of the beam and passes through its centre of gravity as shown in Fig. 9.23. Calculate the normal stress along the sides of the fixed end and the deflection of the free end of the beam, E = 10 GPa.
A simply supported beam carries a concentrated load at the center which fluctuates from a value of W to 4 W. The span of the beam is 497 mm and its cross-section is circular with a diameter of 52 mm. Take ultimate stress of beam material as 687 MPa, Yield stress as 0.55 times ultimate stress and the endurance strength as 0.45 times the value of ultimate stress and take a factor of safety of 1.5. Calculate the maximum value of "W", if the variable stress induced in the beam is 124 N/mm2. Using Goodman relation calculate the value of mean stress in N/mm2.
Problem I - #4, 5, 6 Please put detailed solution. Topic: Mechanics of Deformable Bodies
Please use principle stresses, Tresca failure criterior and Von Mises Yield Criteror to solve for this problem
3. A simply supported rectangular beam 50 mm wide by 100 mm deep carries a uniform load of 1200 N/m over its entire length. What is the maximum length (meters) of the beam If the flexural stress is limited to 20 MPa.
Question
Plz, solve this problem properly with detail?, it is not graded question. Four digits of reg.no : 5395
Home Work: 1. Steel rod 2.5m long is secured between tow walls. If the load on the rod is zero at 20°C, compute the stress when temperature drops to (-20°C). The cross-sectional area of the rod is 1200 mm a=11.7µ m/(m.'C) and E=200 GPa. Solve assuming (a) that the wall is rigid and (b) that the wall spring together a total distance of 0.500mm as the temperature drops. 2. The rigid bar ABC in Figure is pinned at B and attached to the two vertical rods. Initially, the bar is horizontal and the vertical rods are stress-free. Determine the stress in the aluminum rod if the temperature of the steel rod is decreased by 40°C. Neglect the weight of bar ABC. Figure P-268 Steel L=0.9 m A = 300 mm? E = 200 x 10° N/m2 a 11.7 um/(m C) Aluminum L= 1.2 m A = 1200 mm E = 70 x 10° N/m a = 23 um/(m C) B 0.6 m 1.2 m