On a cold winter day, the 55 km/h wind flows in parallel over the wall of a 4 m high and 10 m long house as shown in the figure. The external environment temperature is 5°C and the surface temperature of the wall is 12°C. Under these conditions, find the heat loss from the wall by convection and the friction force acting on the wall surface. If the wind speed doubles, what will be the heat loss from the wall by convection and the friction force acting on the wall surface? Attic space 4 m Air 5°C 55 km/h 10 m 12°C

On a cold winter day, the 55 km/h wind flows in parallel over the wall of a 4 m high and 10 m long house as shown in the figure. The external environment temperature is 5°C and the surface temperature of the wall is 12°C. Under these conditions, find the heat loss from the wall by convection and the friction force acting on the wall surface. If the wind speed doubles, what will be the heat loss from the wall by convection and the friction force acting on the wall surface? Attic space 4 m Air 5°C 55 km/h 10 m 12°C

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A 200 tonne train experience wind resistance equivalent to 60 N/tonne. The operating efficiency of the driving motors is 0.87 and the cost of electrical energy is 0.5 D/kWh. What is the cost of the energy required to make the train travel 1 Km. if the train is supplied at a constant voltage of 1.5 kV and travels with a velocity of 80 km/h, what is the supply current?
Water at 45° C flows over a large plate at a velocity of 25 cm/s. The plate is 1.2 m long in the flow direction, and its surface is maintained at a uniform temperature of 10° C. Calculate the steady rate of heat transfer per unit width of the plate.
A vehicle carrying refrigeration box is moving with a speed of 24 m/s on a road withambient temperature of 323 K. The dimensions of box are 3 m(H) × 4 m (W) × 10 m (L).Assume a wall temperature of 283 K and air flow is parallel to the longest side of the box.Neglecting the heat loss from the front side and backside of the box, calculate heat lossfrom four surfaces. For flow over flat surfaces useNu = 0.036(Re)0.8(Pr)1/3The properties of air at bulk mean temperature are : = 1.165 kg/m3, Pr = 0.701, cp = 1005 J/kg – K,  = 16 × 10–6m2/s
A pressurized gas at a pressure of 7 kPa and temperature of 30°C flows across a 0.3 x 0.3 m² flat plate at 7.45 m/s. The plate is maintained at 70°C. Estimate the heat lost from the plate. Given: µ=2.025x10$ kg/m,s, k=0.02798 W/m.°C Pr = 0.709 , p= 0.0754 kg/m
Wind flows over a flat plate of length L = 25 mm and width W = 8 mm. The plate is maintained at a constant temperature of 32 °C on both sides. using an electric heater generating heat at a rate of Q = 0.5 W which is dissipated to air from both sides of the plate. Consider the temperature of the wind/air as 20 °C and assume that the wind speed does not exceed 100 m/s. The properties of air at this temperature are given as; specific heat capacity Cp = 1.005 kJ/kg-K, thermal conductivity k = 0.0253 W/m-K, Density p = 1.19 kg/m³, and kinematic viscosity v = 1.522 x 10 5 m²/s.
Air at 10°C and 1 atm is flowing parallel at a velocity of 15.5 m/s over the top flat surface of copper plate. The top surface of the copper plate is 0.03m by 0.03m square. The temperature of copper plate is uniform at 65.6°C. For laminar flow, calculate the dimensionless Reymolds number (Nre) and Nussel number (NNu). Table A.3-3a. Physical Properties of Air at 101.325 kPa (1 Atm Abs), SI Units Bx (Bp²/1?) T (kJ/kg · u x T (Pa ·s, k (W/m 103 (1/K • (°C) T (K) (kg/m³) K) -17.8255.41.379 1.0048 1.62 × 6s or kg/m · s) · K) Npr (1/K) m³) 0.022500.7203.92 2.79 x 108 O 273.21.293 1.0048 1.72 × (0-5 0.024230.7153.65 2.04 × 108 10.0 283.21.246 1.0048 1.78 ×/0 0.024920.7133.53 1.72 x 108 37.8 311.01.137 1.0048 1.90%/0-S 0.027000.7053.22 1.12 x 108 Select one: O A. NRe = 27826.58; NNu =98.58 O B. NRe = 23215.74; NNu =152.68 O C. NRe = 27826.58; NNu = 152.68 O D. NRe = 23215.74; NNu =98.58
A printed circuit board with constant surface temperature dissipates 100 W from one side over an area (0.3 mx 0.2 m). A fan is use to cool this board with a flow speed of 12 m/s parallel to the longest dimension of the board. Calculate: 1. The surface temperature of the board for an air temperature of 30 C. 2. Thickness of hydrodynamic and thermal boundary layer. 3. Amount of change in heat transfer rate if the flow parallel to the short dimension. Cp-1000 J/kg.K, k-0.03 W/m.C, Pr-0.667, u = 2 x 105 kg/m.s, p=1.15 kg/m³ Laminar flow, Nu= 0.664Rel/2Pr1/3, Turbule flow, Nu= 0.037Re4/5Prl/3
Consider that you are in an area of Seattle where the wind is blowing at 40 km/h with a temperature of 0 ° C. If you can be mathematically modeled as a cylinder with diameter external of 0.3m and height of 1.70 m. Calculate the number of hot dogs that you need to eat to make up for the amount of energy you lose in heat form for an hour. Note 1: Consider that the external temperature of the clothes is kept constant at 25 ° C. Note 2: Consider a 150 kcal hot dog.
solve. show all assumptions and show full solution
An incompressible fluid flows over a flat plate with zero pressure gradient. The boundary layer thickness is 1mm at a location where the Reynolds number is 1000. If the velocity of the fluid alone is increased by a factor of 4, then the boundary layer thickness at the same location, in mm will be 415
We assume that air at 40°C passes over a 1.5 m long and 50 cm wide plate with a velocity of 3 m/s, as shown in the figure. Calculate the heat transfer from the air to the plate if the temperature of the plate is 10 °C.
answer=correct