nswer the following questions about a 460-V, ~-COlUlected. two-pole. 75-hp. 60-Hz. starting-code-Ietter-E induction motor: (a) What is the maximum current starting current that this machine's controller must be designed to handle? (b) If the controller is designed to switch the stator windings from a ~ connection to a Y connection during starting. what is the maximum starting current that the controller must be designed to handle? (c) If a 1.25: I step-down autotransfonner starter is used during starting. what is the maximum starting current that will be drawn from the line?

nswer the following questions about a 460-V, ~-COlUlected. two-pole. 75-hp. 60-Hz. starting-code-Ietter-E induction motor: (a) What is the maximum current starting current that this machine's controller must be designed to handle? (b) If the controller is designed to switch the stator windings from a ~ connection to a Y connection during starting. what is the maximum starting current that the controller must be designed to handle? (c) If a 1.25: I step-down autotransfonner starter is used during starting. what is the maximum starting current that will be drawn from the line?

Electric Motor Control

10th Edition

ISBN:9781133702818

Author:Herman

Publisher:Herman

Chapter40: Push-button Synchronizing

Section: Chapter Questions

Problem 2SQ

See similar textbooks

Similar questions

Does a DC motor have to be turning in order for it to develop torque? a) yes b) no Most DC motor consist of many turns per armature loop as well as many evenly distributed loops per al mature. a) true b) false Brushes a DC motor. a) are part of the electrical circuit in b) provide a sliding electrical contact to the commutator of c) are made of a material which is softer than the commutator segments of d) all of the above
Draw the circuit please.
I need for my class work please help to understand methods
A 230 volt d.c. motor withThe armature resistance of the motor is 0.6 ohm. If full load armature current is 50 A and no load armature current is 8 A. So find the change in back emf from no load to full load.
(100 V DC shunt motor has a starting line current value of of Ist= 55 A, drawn from the voltage source. Total resistance value of the shunt field circuit is Rsh=20 ohm. Line current value under rated load (full load) conditions is I=15A while the motor is rotating with 500 rpm. Find the internal generated voltage or reverse EMF (Ea), armature power (Pa) and armature torque (Ta) values under rated load (full load) conditions. Write the answers inside the boxes below.) Ea=? Pa=? Ta=?solve the question by using the rules of Electromechanical Energy Conversion 2
b) Draw the speed control block diagram of the DC motor, which can be controlled with armature voltage and field flux with 3 phase AC-DC driver, and explain how the speed control is done.
(100 V DC shunt motor has a starting current value for the armature circuit as last 50 A while the motor is starting to rotate. Total resistance value of the shunt field circuit is 10 times greater than the total resistance value of the armature circuit. Line current value under rated load (full load) conditions is I-12A while the motor is rotating with 500 rpm. Find the internal generated voltage or reverse EMF (Ea), armature power (Pa) and armature torque (Ta) values under rated load (full load) conditions. Write the answers inside the boxes below.) Ea= Pa= Ta=
A 4 pole10V, DC shunt motor operates on a load current 10A, having wave connected armature with 200 conductors. The flux per Pole is 25 m Wb. Resistance of shunt field winding is 1 ohm and resistance of the armature is 0.15 ohm. a) what will the value of back emf voltage to operate the motor on max power?
4. A shunt motor designed to operate at 115 V, has an armature resistance is 0.12 ohms and the motor is taking 60 A in armature current at full load. Determine the value of the external resistance to be inserted in the armature circuit so that the armature current shall not exceed twice its full load value at starting. A. 0.838 ohm C. 0.667 ohm B. 0.919 ohm D. 0.733 ohm
Your Answers may be presented through Discussions, Drawings/Figures/Diagrams, Reference to NEC/PEC and Computations 4. Which NEC table is used to determine the full-load current of a torque motor?
I need the answer as soon as possible
Can you solve the question step by step clearly ?