ng Two rods, one made of brass and the other made of copper, are joined end to end. The length of the brass section is 0.200 m and the length of the copper section is 0.900 m. Each segment has cross-sectional area 0.00500 m². The free end of the brass segment is in boiling water and the free end of the copper segment is in an ice-water mixture, in both cases under normal atmospheric pressure. The sides of the rods are insulated so there is no heat loss to the surroundings. Sw What is the temperature of the point where the brass and copper segments are joined? Express your answer in degrees. T= Submit Part B ΓΙ ΑΣΦ S Request Answer → C m = Value What mass of ice is melted in 6.00 min by the heat conducted by the composite rod? Express your answer with the appropriate units. ← @ C Units ? ? °C

ng Two rods, one made of brass and the other made of copper, are joined end to end. The length of the brass section is 0.200 m and the length of the copper section is 0.900 m. Each segment has cross-sectional area 0.00500 m². The free end of the brass segment is in boiling water and the free end of the copper segment is in an ice-water mixture, in both cases under normal atmospheric pressure. The sides of the rods are insulated so there is no heat loss to the surroundings. Sw What is the temperature of the point where the brass and copper segments are joined? Express your answer in degrees. T= Submit Part B ΓΙ ΑΣΦ S Request Answer → C m = Value What mass of ice is melted in 6.00 min by the heat conducted by the composite rod? Express your answer with the appropriate units. ← @ C Units ? ? °C

College Physics

11th Edition

ISBN:9781305952300

Author:Raymond A. Serway, Chris Vuille

Publisher:Raymond A. Serway, Chris Vuille

Chapter1: Units, Trigonometry. And Vectors

Section: Chapter Questions

Problem 1CQ: Estimate the order of magnitude of the length, in meters, of each of the following; (a) a mouse, (b)...

See similar textbooks

Similar questions

I Review I Cons A weather balloon rises through the atmosphere, its volume expanding from 3.6 m to 12 m3 as the temperature drops from 20 °C to -10 °C. Part A For the steps and strategies involved in solving a similar problem, you may view a Video Tutor Solution. If the initial gas pressure inside the balloon is 1.0 atm, what is the final pressure? Express your answer in atmospheres. n ΑΣφ ? P = atm Submit Request Answer
a 6.0 cm diameter cyliinder of nitrogen gas has a 4.0 cm thick movable copper piston. the cylinder is oriented vertically as shown in the figure, and the air above the piston is evacuated. when the gas temperature is 25 degree C the piston floats 20 cm above the bottom of the cylinder then 1.5 J of heat energy are transferred to the gas. what is the new equilibrium temperature of the gas in degree C
I.C 02/A/ Use the Crank-Nicolson method to solve for the temperature distribution of a long thin rod with a length of 10 cm and the following values: k = 0.49 cal/(s cm °C), Ax = 2 cm, and At = st 0.1 s. Initially the temperature of the rod is 0°C and the boundary conditions are fixed for all times at 7(0, t) = 100°C and 7(10, t) = 50°C. Note that the rod is aluminum with C = 0.2174 cal/g °C) and p = 2.7 g/cm³. List the tridiagonal system of equations and determined the temperature up to 0.1 s.
Aà
Two rods, one made of brass and the other made of copper, are joined end to end. The length of the brass section is 0.200 m and the length of the copper section is 0.800 m. Each segment has cross-sectional area 0.00700 m^2. The free end of the brass segment is in boiling water and the free end of the copper segment is in an ice-water mixture, in both cases under normal atmospheric pressure. The sides of the rods are insulated so there is no heat loss to the surroundings. What mass of ice is melted in 6.00 min by the heat conducted by the composite rod?
AL = a AT Activity 2 = BAT %3D Schmedrick takes his dune buggy to the gas station and fills it the very brim. His tank is a steel cylinder of radius 23 cm and height 45 cm (big enough to hold about 20 gallons). He burns a liter of gas getting to the beach, where both the tank and the gas heat up by 20 °C. Both the tank and the gas expand. For steel a = 1.1· 10$/°C. For gasoline B = 9.6- 104/°C. Does the tank overflow? 1. Use the linear expansion formula to calculate the increase in radius of the tank: up to Hints. 5.06 · 103 cm 2. Use the linear expansion formula to calculate the increase in height of the tank: 9.9 ·103 cm 3. For a cylinder, V = ar?h. Calculate the increase in volume of the tank: 4. Calculate the volume of gasoline at the beach before expansion. (1 cm³ = 1 mL): 73 785.613 cm³ 5. Use the volume expansion formula to calculate the increase in volume of the gasoline: 1416.684 cm³ 6. Conclusion: Schmed will be kicked out for spilling gas at the beach! %3D 49.3694 cm³
In this problem you will consider the effect that thermal expansion due to temperature will have on Archimedes' principle. Take the densities of water and copper at 0ºC to be 1.00 × 103 kg/m3 and 8.90 × 103 kg/m3, respectively. a. Calculate the fraction of a copper block’s weight that is supported by the buoyant force at 0°C. b. Calculate the fraction of a copper block’s weight that is supported by the buoyant force at 95°C. Assume the volume expansion coefficient of copper is βC = 5.10 × 10-5 1/°C.
A copper sample (ccu = 387 J/kg•K) of mass mẹ = 75 g and temperature Te = 312ºC is dropped into a glass beaker that contains a mass of water me = 220 g (cw = 4190 J/kg•K). %3D The initial temperature of the water and the beaker is Tw,b = 12.0°C. What is the final temperature of the copper, beaker, and water? * The heat capacity (the specific heat times the mass) of the beaker is Cb' = 190 J/K.
Aluminum rivets used in airplane construction are made slightly larger than the rivet holes and cooled by "dry ice" (solid CO₂) before being driven. Part A If the diameter of a hole is 4.500 mm, what should be the diameter of a rivet at 23.0°C, if its diameter is to equal that of the hole when the rivet is cooled to -78.0°C, the temperature of dry ice? Assume that the expansion coefficient of aluminum is 2.4 x 10-5 (°C)-¹ and remains constant. -1 Express your answer in milimeters to four significant figures. d = Submit 15. ΑΣΦ Request Answer ? Review Constants mm
Steel wire of length 'L' at 40°C is suspended from the ceiling and then a mass 'm' is hung from its free end. The wire is cooled down from 40°C to 30° C to regain its original length 'L'. The coefficient of linear thermal expansion of the steel is 10rC, Young's modulus of steel is 10' N/ 'm and radius of the wire is 1 mm. Assume that L >> diameter of the wire. Then the value uf 'm' in kg is nearly.
O Example : o The base of an insect's leg is approximately spherical in shape ,with a radius of about 2x10-5 m. The 0.003 g mass of the insect is supported equally by the six legs .calculate the angle 0 for an insect on the surface of water .Assume the water temperature is 20°C ?
A hot air balloon uses the principle of buoyancy to create lift. By making the air inside the balloon less dense then the surrounding air, the balloon is able to lift objects many times its own weight. A large hot air balloon has a maximum balloon volume of 2090 m3. a. If the air temperature in the balloon is 54 °C, how much additional mass, in kilograms, can the balloon lift? Assume the molar mass of air is 28.97 g/mol, the air density is 1.20 kg/m3, and the air pressure is 1 atm.