iven the following elements of T-Beam Flange Width, bf = 1000 mm Flange Thickness, tf = 150 mm Width of Beam, bw = 350 mm Effective Depth , d = 480 mm Concrete Strength, f’c = 28 Mpa Steel Strength, fy = 415 Mpa If the beam is reinforced for tension only, determine the following: (a.) Balanced steel area. (b.) Nominal and ultimate balanced moment capacity. (c.) Maximum steel area (d.) Nominal and ultimate maximum moment capacity. hello please answer this thank you

iven the following elements of T-Beam Flange Width, bf = 1000 mm Flange Thickness, tf = 150 mm Width of Beam, bw = 350 mm Effective Depth , d = 480 mm Concrete Strength, f’c = 28 Mpa Steel Strength, fy = 415 Mpa If the beam is reinforced for tension only, determine the following: (a.) Balanced steel area. (b.) Nominal and ultimate balanced moment capacity. (c.) Maximum steel area (d.) Nominal and ultimate maximum moment capacity. hello please answer this thank you

Steel Design (Activate Learning with these NEW titles from Engineering!)

6th Edition

ISBN:9781337094740

Author:Segui, William T.

Publisher:Segui, William T.

Chapter9: Composite Construction

Section: Chapter Questions

Problem 9.1.3P

See similar textbooks

Related questions

Q: Determine the required tension steel area of the T beam with given properties below. Width of…

A: Given:- Width of flange, bf=500 mmWidth of web, bw=340 mmThickness of flange, tf=140 mmEffective…

Q: Concrete Reinforcement Width of section Reinforcement strengths. fcu:= 30-MPa fy:= 450-MPa b:= 280…

Q: Design economical spacing of 10 mm diameter stirrups for the beam which carries the loads shown.…

A: d (effective depth) = 430mm

Q: 4-ø28 mm at the bottom and 2-ø20 mm at the top of the beam, Concrete covering to centroid of…

Q: - 4@50 --- 4@100- -rest @ 175 2-032 - $12 2-020 400 mm 175mm-- B SECTION -1525 mm- ACANTILEVER BEAM…

Q: simply supported beam is reinforced with 4 – 28 mm ø at the bottom and 2 – 28 mm ø at the top of the…

A: Given fc’ = 30 MPa, fy = 415 MPa. Balanced steel ratio ρb = 0.031 Reduction factor= 0.9

Q: concrete floor slab 100 mm thick is cast monolithic with concrete beam 2.0 m on centers. The beams…

Q: 2-032 Ф12 2-020 400 mm -175mm- B SECTION 1525 mm ACANTILEVER BEAM ELEVATION B

A: Given Fc 28 MPa Fy 415 mpa Fyt 275 mpa Width 175 mm Depth 400- 60 = 340 mm Effective cover 60mm…

Q: Using the stress block, determine the ultimate moment of resistance of the section shown in Figure 2…

Q: simply supported beam is reinforced with 5-25mm at the bottom And 2-20mm at the top if the beam.…

Q: 3. A reinforced rectangular concrete beam having a width of 300 mm, effective depth of 500 mm, fc’ =…

A: As per bartleby guidelines , experts are allowed to solve only first three parts. Please post other…

Q: A beam has a width of 300 mm and total depth of 600 mm strength fc=36 MPa. Steel yield strength…

A: Given, b = 300 mm d = 600 mm f'c = 36 MPa fy = 415 MPa

Q: A reinforced concrete T – beam is to be designed for tension reinforcement only. The beam width is…

A: Given,The beam width =250 mmeffective depth = 400 mm.The flange thickness =100 mm effective flange…

Q: beam has a width of 300 mm and an effective depth of 480 mm strength Pc= 34 MPa. Steel yield…

A: Answers are boxed.

Q: A rectangular beam 250 mm wide, 500 mm deep is reinforced at the bottom with d-20-mm-dismeter bars…

Q: The T-section shown is subjected to a design ultimate moment of M = 180kN.m. Find the require area…

A: Solution: Given: Ultimate moment(factored moment) = 180 kNm fc = 30 MPa fy = 450 MPa bf = 400 mm hf…

Q: A rectangular beam has the dimensions (see Figure) b- 12 in, h- 20 in, and d- 17 in. and is…

A: It is required to determine the stress in the steel due to 10 ft-k moment.

Q: The concrete post is reinforced axially with four symmetrically placed steel bars, each of…

Q: -4@50 -- - 4@100 -rest @ 175 2-032 $12 2-020 400 mm 175mm- BSECTION 1525 mm ACANTILEVER BEAM…

A: Cantilever beam Pu is ultimate load at free end Pu will be min of pu calculated from shear and…

Q: A beam cast monolithically has the following properties: bf=1200mm, t or hf = 110mm, bw=380mm and…

Q: Details of a rectangular column are as follows: Column width along X-axis-250 mm Column Depth along…

Q: A reinforced concrete beam has a width of 250mm and an effective depth of 500mm. If F'c= 28MPa, Fy =…

A: Hi! Thank you for the question, As per the honour code, we are allowed to answer three sub-parts at…

Q: A concrete floor slab 10e mm thick is cast monolithic with concrete beams 2.0 m on centers. The…

Q: A simply supported beam is reinforced with 5-925 mm at the bottom and 2-o20 mm at the top of th…

Q: Find the maximum allowable value of P for the column. The cross-sectional areas and working stresses…

Q: A concrete floor slab 100 mm thick is cast monolithic with concrete beams 2.0 m on centers. The…

Q: concrete floor slab 100mm thick is cast monotholic with concrete beams 2.0 m on centers. the beams…

Q: For the following plan it is required to: 1- Design all beams for flexure and shear, where they have…

A: Solution: Given: Slab load = 20 kN/m2 fc = 30 MPa fy = 420 MPa Check the slab type: 73=2.33>2…

Q: A.

A: Given:- fcu=30MPa fy=450MPa b=280mm d=510mm As=2410mm2 As=628mm2 d'=50mm To find:- ultimate moment…

Q: flexure only is reinforced as follows: SECTION: TOP BARS @ MIDSPAN: 2-⌀20mm @ FACE OF SUPPORTS:…

Concept explainers

Design criteria for structural loading

The different loads such as loads due to self-weight (dead load) and external loads such as live load, wind loads, seismic load, snow load, and other loads and load combinations that influence the design of a building are called structural loading. The nature of the applied load differs from changes in the location, design, and type of materials used. The design criteria require that structures must be designed and constructed to be able to withstand all load types that are expected to act upon the structure and render its usage for the designated purpose. The structural members such as beams, slabs, columns, and foundations help the structure to withstand the applied load. There are different institutes such as ASCE and ACI that provide building design codes to assure minimum safety requirements and quality of the structures.

Question

Given the following elements of T-Beam Flange Width, bf = 1000 mm Flange Thickness, tf = 150 mm Width of Beam, bw = 350 mm Effective Depth , d = 480 mm Concrete Strength, f’c = 28 Mpa Steel Strength, fy = 415 Mpa If the beam is reinforced for tension only, determine the following: (a.) Balanced steel area. (b.) Nominal and ultimate balanced moment capacity. (c.) Maximum steel area (d.) Nominal and ultimate maximum moment capacity. hello please answer this thank you

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 2 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, civil-engineering and related others by exploring similar questions and additional content below.

Similar questions

L (m)=2.8 h (mm)=375 hs (mm)=325 b (mm)=275 (Ơst)allow (MPa)=150 (Ơconc)allow (MPa)= 18
Find the ultimate moment of resistance for the rectangular section reinforced as shown below. material strengths: Concrete Reinforcement Width of section Reinforcement fcu= 30-MPa fy:= 450-MPa b:= 280 mm d:= 510 mm d':= 50-mm 2 A, 2410-mm A's:= 628-mm 2 b A', Hi As
A simply supported beam is reinforced with 5-p25 mm at the bottom and 2-020 mm at the top of the beam. Concrete covering to centroid of reinforcement is 70 mm at the top and 64 mm at the bottom of the beam. The beam has a gross depth of 450 mm and gross width of 300 mm. fc'= 28 MPa, fy = 415 MPa. Assume bars laid out in single layer. Calculate the following if the limiting tensile steel strain is 0.004 for a ductile failure: Depth of the neutral axis from the extreme concrete compression fiber to the nearest whole number = mm Design strength of the beam section to the nearest whole number = kN -m Maximum service uniform live load over the entire span in addition to a DL = 20 kN/m (including the weight of the beam) if it has a span of 6 m = kN/m (to the nearest whole number)
A beam has a width of 300 mm and an effective depth of 480 mm strength Pc= 34 MPa. Steel yield strength fy=415 MPa. The section is to be reinforced for tension only and the effective concrete cover is 70 mm. Deadload moment is 140 kN-m and the liveload moment is 180 kN-m. Use 2010 NSCP with t= 0.005. A. What is the governing steel ratio? B. What is the maximum number of bars needed for a 25mm diameter reinforcements? C. What is the minimum number of bars needed for a 25mm diameter reinforcements?
concrete floor slab 100 mm thick is cast monolithic with concrete beam 2.0 m on centers. The beams have a span of 4.2 m and have a web width of 250 mm, and overall depth of 450 mm. The tensile reinforcement consists of 4-25 mm bars in two rows with 25 mm vertical clear spacing. Use material strength f’c = 21 MPa and fy = 415 MPa. Calculate the following considering a T-geometry; a) effective flange width of an interior beam in mm b) depth of uniform stress block at ultimate stage in mm ( round of to nearest whole number) c) tensile steel strain compatible with concrete strain if 0.003 ( round if 3 decimal places)
X = 165 Y = 40 Z = 25 D = 500
O Find the ultimate moment of resistance for the rectangular section reinforced as shown below. material strengths: Concrete Reinforcement Width of section Reinforcement fcu:= 30-MPa fy:= 450-MPa b:= 280-mm d:= 510-mm A, 2410-mm d':= 50-mm A's:= 628-mm² b A', d'
Situation: A beam has a width of 300 mm and total depth of 600 mm strength f'c-36 MPa. Steel yield strength fy=415 MPa The section is to be reinforced for tension only and the effective concrete cover is 65 mm. Which of the following most nearly gives the value of our balanced steel ratio? a. 0.00370 b. 0.03456 C. 0.02860 d. 0.03522 Which of the following most nearly gives the value of our balanced distance of the cuter most fiber of compression fiber to our neutral axis? a. 313.256 mm b. 354.68 mm C. 333.333 mm d. 322.435 mm Which of the following most nearly gives the value of our balanced depth of compression block? a. 248.412 mm b. 266.2676 mm C. 301.478 mm d. 281.261 mm
Please give explanations and formulas
Using the stress block, determine the ultimate moment of resistance of the section shown in Figure 2 and check whether the steei provided satisfies the bending moment due to the loads on the beam. Characteristic compressive strength of concrete, fck= 25 N/mm² Characteristic tensile strength of steel, fyk = 500 N/mm2 Clear cover to main steel as 20 mm. Ultimate Design Load =13 kN/m 2 402 mm 370 mm 2 1470 mm 9 m 230 mm Figure 2
A beam cast monolithically has the following properties: bf=1200mm, t or hf = 110mm, bw=380mm and h=800mm. It is reinforced with 10D32mm grade 420MPa bars. Concrete strength is assumed to be 27.5MPa and the centroid of tension reinforcement is located 665mm from the outermost compression fiber. A. Determine maximum nominal moment to ensure tension controlled, kN-m. B. Calculate the balanced steel area, mm2. C. Calculate the balanced moment in kN-m.
A reinforced concrete T – beam is to be designed for tension reinforcement only. The beam width is 250 mm and the effective depth is 400 mm. The flange thickness is 100 mm and its effective flange width is 900 mm. The applied moment is 300 kN–m. What is the area of tension reinforcement required? use: fc’ = 20.7 MPa and Fy = 414 MPa. * a. 3 983 mm² b. 5 105 mm² c. 2 166 mm² d. 4 094 mm²