In the figure below, this "double" nozzle discharges water (at 10°C, density= 1000 kg/m3) into the atmosphere at a rate of 0.50 m3/s. The pressure at the inlet is to be 315612 Pa. If the nozzle is lying in a horizontal plane. Jet A is 10 cm in diameter, jet B is 12 cm in diameter, and the pipe (1) is 30 cm in diameter. The x-component of force (Rx) acting through the flange bolts is required to hold the nozzle in place is:

In the figure below, this "double" nozzle discharges water (at 10°C, density= 1000 kg/m3) into the atmosphere at a rate of 0.50 m3/s. The pressure at the inlet is to be 315612 Pa. If the nozzle is lying in a horizontal plane. Jet A is 10 cm in diameter, jet B is 12 cm in diameter, and the pipe (1) is 30 cm in diameter. The x-component of force (Rx) acting through the flange bolts is required to hold the nozzle in place is:

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A three-arm sprinkler is used to water a garden by rotating in a horizontal plane. Water enters the sprinkler along the axis of rotation at a rate of 40 L/s and leaves the 1.2-cm-diameter nozzles in the tangential direction. The central sprinkler bearing applies a retarding torque of 50 N-m due to friction at the anticipated operating speeds. Part A For a normal distance of 40 cm between the axis of rotation and the center of the nozzles, determine the rate of rotation of the sprinkler. Express your answer to three significant figures. V ΑΣφ I1 vec ? W = rad/s Submit Request Answer
V2 D2 Y 60° X Rx Ry 不 D, A segment of the carotid artery (as shown) has an inlet velocity V1 = 50 cm/s and diameter of D1 = 1.5 cm. The outlet of the segment has a diameter D2 = 1.1 cm. The pressure at the inlet p1 = 110 mmHg and the pressure at the outlet p2 = 95 mmHg. The blood density is 1.050 g/cm³. Ignoring the mass of blood within the segment, calculate the reaction force Ry required to support this segment of the vessel. Give your answer in dynes (1 dyne = 1x105 N).
Water is flowing in the pipe shown in the figure below, with the 8.20-cm diameter at point 1 tapering to 3.85 cm at point 2, located y = 11.5 cm below point 1. The water pressure at point 1 is 3.20 ✕ 104 Pa and decreases by 50% at point 2. Assume steady, ideal flow. What is the speed of the water at the following points? (a) point 1 m/s (b) point 2 m/s.
solve the following thermodynamic problem
A reducing elbow in a horizontal pipe is used to deflect water flow by an angle 8= 45° from the flow direction while accelerating it. The elbow discharges water into the atmosphere. The cross-sectional area of the elbow is 150 cm² at the inlet and 25 cm2 at the exit. The elevation difference between the centers of the exit and the inlet is 40 cm. The mass of the elbow and the water in it is 56 kg. Determine the anchoring force needed to hold the elbow in place. Take the momentum-flux correction factor to be 1.03 at both the iniet and the outlet. The density of water is 1000 kg/m³, and the flow rate of water is 30 kg/s. Waters 30.0 kg/s 150 cm- 25 cm² 45° 40 cm The anchoring force needed to hold the elbow in place is The resultant direction of force is KN
FR Out A water jet with a uniform velocity profile, whose average speed is increased to 8 m/s with the help of a nozzle with an outlet diameter of 10 cm, shown in the figure, is perpendicular to a vertically fixed plate. The water is scattered on the plate in all directions by the impact of the impact. Calculate the FR force in N (newtons) required to prevent the plate from moving horizontally under the influence of water. Take the density of water as 1000kg/m^3. 157 200 250 126 628 503 O O O O O
A- Blood flow from the left ventricle into the aorta can be modeled as a reducing nozzle (Figure below). Model both the left ventricle and the aorta as a tube with diameter of 3.1 and 2.7 cm, respectively. The pressure in the left ventricle is 130 mmHg and the pressure in the aorta is 123 mmHg. Blood is ejected from the left ventricle at a speed of 120 cm/s. Calculate the difference in height between these two locations. V₂ Az = ? Aorta location 2 Left ventricle location 1
Please I want a detailed explanation of the energy method rule placed in the first line and how these numbers appeared to us. I want a detailed explanation please urgent .
Air flows through the 8 cm diameter pipe in the figure at 1 atm 20 oC conditions. The manometric fluid in the Pitot static tube assembly is water. Find the air velocity at the centerline if h = 40 mm of water column.
A Pelton wheel develops 750 kW under ahead of 200 m. Its nozzle has a diameter of 10 cm and losses in the pipeline due to friction amount to 90 Qʻ, where Q is discharge in cubic meters per second. Assuming the gross head and efficiency of the wheel to be constant and Cy for the nozzle as 0.98. Find the discharge and overall efficiency. If the power developed is reduced to 650 kW by (i) Operating the needle in the nozzle and
A reducing elbow is used to deflect water flowrate at a rate of 1920 g/s in a horizontal pipe downward by an angle theta = 43 from the flow of direction while accelerating it. The elbow discharges water into the atmosphere. The diameter of the elbow at the inlet is 6.5 cm and at the exit is 1.5cm. The elevation difference between the centers of the exit and the inlet is 22cm . The mass of the elbow and the water is 61.5 kg. Determine the anchoring force needed to hold the elbow in place
Water enters a two-armed lawn sprinkler along a vertical axis at a rate of 60 L/s and leaves the sprinkler nozzles as 2-cm diameter jets at a 30°angle, determine the rotational speed in RPM of the sprinkler.