In a diffraction experiment the 1st order light (m=1) from a diffraction grating is falling onto a single slit (see picture below). The light from the slit is then observed on a second screen and the measured width of the central diffraction peak is found to be 8 mm. Calculate the number of lines per millimetres of the grating. The distance from the slit to the second screen is 2.16 m, the distance from the diffraction grating to the screen with the slit is 5 m, the slit width is 0.25 mm and the distance from the middle of the screen with the slit to the slit is 10 mm.

In a diffraction experiment the 1st order light (m=1) from a diffraction grating is falling onto a single slit (see picture below). The light from the slit is then observed on a second screen and the measured width of the central diffraction peak is found to be 8 mm. Calculate the number of lines per millimetres of the grating. The distance from the slit to the second screen is 2.16 m, the distance from the diffraction grating to the screen with the slit is 5 m, the slit width is 0.25 mm and the distance from the middle of the screen with the slit to the slit is 10 mm.

College Physics

11th Edition

ISBN:9781305952300

Author:Raymond A. Serway, Chris Vuille

Publisher:Raymond A. Serway, Chris Vuille

Chapter1: Units, Trigonometry. And Vectors

Section: Chapter Questions

Problem 1CQ: Estimate the order of magnitude of the length, in meters, of each of the following; (a) a mouse, (b)...

See similar textbooks

Similar questions

The dispersion curve of glass is the curve that describes how the index of refraction of glass changes as a function of the wavelength. This curve can be represented approximately by Cauchy's empirical equation, n = A + B/2² where for a specific glass in question A = 1.40 and B = 2.5 × 10 nm² (yes, those units are nanometer squared). Find the phase and group velocities for light of 500nm wavelength in that glass.
An X-ray beam of wavelength 3.4 × 10-10 m makes an angle of 33° with a set of planes in a crystal which results in first order constructive interference. Determine the plane spacing in nanometers. (Please include 2 decimal places).
What is the thickness of the film of Cryolite (R.I.= 1.36) is coated on a glass surface (R.I.=1.55)to increase the transmission of the normally incident light of wavelength 5893 A.U. options a:- 2166 A.U. b:- 1083 A.U. c:- 541 A.U d:- 1200 A.U.
In the process of performing an analysis, you determine that you need to improve the precision by limiting the error in the absorbance to 9.400 x 10%. You attempt to achieve this by reducing the amount of stray light that reaches the detector. What is the maximum amount of stray light that can reach the detector that will limit the error in the absorbance to 9.400 x 10 for a true absorbance of 1.0000000? s= 222 x10-5 Incorrect
An x-ray was used to examine a sample of chromium having a BCC crystal structure.Using x-rays having a wavelength of 0.1682 nm, a diffractometer is used. The distorting (010) aircraft is the plane. Chromium has an atomic radius of 0.125 nm. A)Compute the interplanar spacing and Calculate the diffraction angle. Assume second-order of diffraction, n = 2.
An experiment is setup to measure the diameter of the sphere in the diagram using sizing measurements based on interference. A thin piece of glass slab is placed one side of a highly reflective substrate. A yellow light created by Sodium wavelength = 589.3nm having a normally incident. Fringes can be observed on the glass from the interference. With a gap between the two bright fringes is measured to be g = 0.118mm, with an overall length for the setup to be L = 20mm. The setup will be placed in air having n = 1. What is the diameter of the sphere? W
In an interference experiment using a monochromatic source emitting light of wavelength 1, the fringes are produced by two long, narrow slits separated by a distance d. The fringes are formed on a screen which is situated at a distance D >> d.Write down an expression for the fringe width w. Please use "*" for products (e.g. B*A), "/" for ratios (e.g. B/A) and the usual "+" and "-" signs as appropriate. Use "lambda" (without the quotes) for 1 in the equation box. For example, use d*lambda for d2. Please use the "Display response" button to check you entered the answer you expect. w=
In a Young's double-slit experiment, the seventh dark fringe is located 0.033 m to the side of the central bright fringe on a flat screen, which is 1.1 m away from the slits. The separation between the slits is 1.3 x 10-4 m. What is the wavelength of the light being used? Seventh dark fringe Central bright fringe Seventh dark fringe Double slit Screen
air 1. n = 1 [a] The figure shows a soap film of thickness dį in air. Light impinges on the film with an angle of incidence 01 and is reflected and refracted at the interfaces. Rays 1 and 2 represents reflected light, while rays 3 and 4 represent light that has been transmitted into the glass. soap \[c] n, = 1.33 |d [b] air n= 1 3 4 The bracketed letters (a], [b], and [c] indicate reflections at the air-soap, and soap-air interfaces. For which of these reflections does a phase change of n occur? Check all that apply. [a] [b] O (c)
A blackbody radiator in the shape of a sphere has a surface area of 152 If it has a temperature of 1200 K how much energy does it emit per second? If the sun emits light with a peak wavelength of 500 nm. What is the temperature of the sun? Two slits, 0.5 mm apart, are placed at a distance of 1.5 meters from a screen. Light of 300 nm illuminates the two slits and an interference pattern is observed on the screen. What is the distance between the central bright spot and the first bright spot on either side?
In a double-slit interference experiment, the light source is a visible laser with wavelength 7.13E-7 m, the distance between slits is 5.42E-4m, and a screen is 5.38 m away from the slits. In the interference pattern on the screen, what is the distance between the central bright fringe and the first bright fringe next to it (in m)?
A physicist is calibrating a spectrometer that uses a diffraction grating to separate light in order of increasing wavelength (?A,?B, and ?C). He observes three distinct first-order spectral lines at the following respective angles ?m (where m denotes order). ?1 = 12.8°, ?1 = 14.2°, ?1 = 15.0° (a)If the grating has 3,760 grooves per centimeter, what wavelength (in nm) describes each of these spectral lines? at ?1 = 12.8° ?A= nm ?1 = 14.2° ?B= nm ?1 = 15.0° ?C=. nm (b) At what angle (in degrees) would each of these lines be found in the second-order spectrum? for ?A ?2= ° for ?B ?2= ° for ?C ?2= °