If a 25.00 ml aliquot of a solution containing sulfide ions was added to 25.00 ml of 0.0134 M Cu2+ solution. The CuS precipitate was washed and collected. The pH of the combined filtrate and washings was then adjusted by the addition of ammonia and the solution was titrated with 0.01453 M EDTA, using a suitable indicator. The endpoint volume was found to be 11.13ml. Find the molarity of the sulfide in the sample solution.

If a 25.00 ml aliquot of a solution containing sulfide ions was added to 25.00 ml of 0.0134 M Cu2+ solution. The CuS precipitate was washed and collected. The pH of the combined filtrate and washings was then adjusted by the addition of ammonia and the solution was titrated with 0.01453 M EDTA, using a suitable indicator. The endpoint volume was found to be 11.13ml. Find the molarity of the sulfide in the sample solution.

Fundamentals Of Analytical Chemistry

9th Edition

ISBN:9781285640686

Author:Skoog

Publisher:Skoog

Chapter16: Applications Of Neutralization Titrations

Section: Chapter Questions

Problem 16.20QAP

See similar textbooks

Similar questions

What is the minimum volume of 0.0071 M NaCN(aq) necessary to dissolve the gold from 1.0 metric ton (1000 kg) of ore if the ore contains 0.012% gold?
If a 25.00 ml aliquot of a solution containing sulfide ions was added to 25.00 ml of 0.0139 M Cu2+ solution. The CuS precipitate was washed and collected. The pH of the combined filtrate and washings was then adjusted by the addition of ammonia and the solution was titrated with 0.01453 M EDTA, using a suitable indicator. The endpoint volume was found to be 10.66ml. Find the molarity of the sulfide in the sample solution.
The alcohol content of a certain low alcohol beer was determined using volumetric analysis. In this analysis, a 17.1-mL sample of the beer was pipetted into a 100-mL volumetric flask and the solution was made up to the mark. Then 20.4 mL aliquots of his solution were titrated against acidified potassium dichromate solution, K,Cr,0, of concentration 0.077 mol/L. A mean titre (or volume of the titrant) of 19.9 mL was obtained. The equation for the analysis is: 2- 3+ 2 Cr,0," (aq) + 3 C,H,OH (aq) + 16 H (aq) = 4 Cr (aq) + 3 CH,COOH (aq) + 11 H,0 (I) What was the molarity of the alcohol in the beer?
A salt sample was analyzed for its purity. A 0.5000g sample was dissolved in water and diluted to 250.0mL. From this solution, 25.00mL was taken for analysis. To this aliquot, 20.00mL of a 0.08735M AgNOg solution was added to precipitate the chloride. The excess AgNO, required 12.45mL of a 0.09473M KSCN solution for back-titration. Calculate the purity of the salt sample as percent by mass of KCI (74.55 g/mol). (Answer: 84.63% KCI)
A mixture containing iodide is analyzed by the Volhard method. 0.6712 g of the sample is reacted with 50.00 mL of 0.05619 M AGNO3. The precipitate formed is removed by filtration and the excess Ag+ is back titrated with KSCN 0.05322 M, requiring 35.15 mL to reach the end point. Calculate the concentration of iodide in the sample in parts per million (mg/kg).
(b) An unknown solution containing 25.00 mL of Ni2+ in dilute HCI is treated with a known excess of 25.00 mL of 0.05382 M EDTA solution. The solution turns yellow when a few drops of indicator are added. The excess unreacted EDTA back titrated with 0.02299 M Zn²*, which requires 17.00 mL to reach the red end point. What is the molarity of Ni2+ in the unknown solution?
The calcium content of a milk sample was to be determined by EDTA titration. A sample weighing 0.206 g was mixed with an aqueous buffer at pH 11.5. A few drops of EBT indicator were added and the solution required 24.25 mL of 1.538 x 10-2 M EDTA to reach the endpoint. Calculate the weight percent of calcium (FW =40) in the milk.
Titration of Ca²+ and Mg²+ in a 50.00-mL hard water sample required 23.65 mL of 0.01205 M EDTA. A second 50.00-mL aliquot was made strongly basic with NaOH to precipitate Mg²+ as Mg(OH)2(s). The supernatant liquid was titrated with 14.53 mL of the EDTA solution. Calculate the total hardness of the water sample, expressed as ppm CaCO3.
A sample containing calcium was analyzed by gravimetry, converting all calcium to calcium oxalate monohydrate (CaC2O4 • H2O). The sample weighing 0.2654 g was dissolved by adding 6M HCl, and then ammonium oxalate solution was added to precipitate all the calcium. The precipitate was suction filtered and dried in an oven at 95 °C for one hour. The solid obtained weighed 0.3216 grams.Calculate:A) The percentage of CaCO3B) The percentage of Ca C) The percentage of CaO
2) A 100.0 mL sample of drinking water was treated with ammonia buffer and after addition of Eriochrome Black T indicator, required 18.0 mL of 0.00559 M EDTA for titration. (a) Identify the role of ammonia buffer in the analysis. (b) Identify the indicator and endpoint color. (c) Calculate the total hardness of the water sample as ppm CaCO
Calculate the concentration of Fe2O3 in a mineral sample after solubilization of 0.4891g and availability of Fe as Fe2+. The released Fe2+ ions were titrated with a 0.02153 mol/L K2Cr2O7 solution requiring 36.92 mL to reach the end point of the titration. Show the calculations and express the concentration in % m/m. K2Cr2O7; + 6Fe2+ + 14H+ → 2Cr+3 + 2K+ + 6Fe3+ + 7H20
a 20 ml portion of a deep well water sample was diluted to 250 ml solution. a 50 ml aliquot of this diluted sample water was buffered at ph 10 and required 8. 50 ml of a standard EDTA.the titrant was standardized using 100ml containing 0.8622 mg primary standard calcium carbonate , which required 15.45 ml for titration.(a) identify a possible indicator and its endpoint color (b) calculate the molarity of the EDTA solution. (c) calculate the total hardness of the water as ppm CaCO3 (d) identify the quality of the water sample in terms of hardness