H.W.6: A hollow circular cold-rolled bronze [G, 6,500 ksi] tube (1) with an outside diameter of 1.75 in. and an inside diam- eter of 1.25 in. is securely bonded to a solid 1.25-in.-diameter cold-rolled stainless steel [G, = 12,500 ksi] core (2) as shown in Figure and the allowable shear stress of core (2) is 60 ksi. Determine . The allowable shear stress of tube (1) is 27 ksi,

H.W.6: A hollow circular cold-rolled bronze [G, 6,500 ksi] tube (1) with an outside diameter of 1.75 in. and an inside diam- eter of 1.25 in. is securely bonded to a solid 1.25-in.-diameter cold-rolled stainless steel [G, = 12,500 ksi] core (2) as shown in Figure and the allowable shear stress of core (2) is 60 ksi. Determine . The allowable shear stress of tube (1) is 27 ksi,

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Related questions

Q: The pin-connectsed structure consists of a rigid bar ABCD and two bronze alloy [E = 100 GPa] bares,…

A: GivenE=100GPaA=340mm2L1=810mmL2=1080mma=480mmb=38mmc=600mmσlim=165MPa

Q: Rigid bar ABC is supported by two identical solid bronze [σy=331 MPa; E = 105GPa; α= 22.0 x 10-6/…

Q: The pin-connected structure shown in the figure consists of a rigid beam ABCD and two supporting…

A: The bar 1 is bronze alloy with elasticity The cross section area of bar 1 is The bar 2 is aluminum…

Q: H.W.7: A pin-connected structure is supported as shown in Figure load P is applied. Bar (1) is made…

A: Given data Bar (1) made of brass [oy = 18,000 psi; E = 17 x 106 psi], length of L = 8.0 ft. Bar…

Q: Part of a two story building is shown in the figure in which a concerte column and a steel column…

A: To find: The displacement at B and C. Given: The compressive force on the first floor is PB=420…

Q: A hollow steel [E = 30,000 ksi] tube (1) with an outside diameter of 4.00 in. and a wall thickness…

Q: A solid 57-mm-diameter cold-rolled brass [G = 42.3 GPa) shaft that is 1.35 m long extends through…

A: “Since you have posted a question with multiple sub-parts, we will provide the solution only to the…

Q: A load P is supported by a structure consisting of rigid bar ABC, two identical solid bronze [E=…

Q: smooth pin at D and by vertical aluminum alloy [E = 10,000 ksi] bars attached at joints A and C. Bar…

Q: A copper [E = 104 GPa, a = 17.1x10-6/°C] rod (2) is placed within a steel [E = 208 GPa,…

Q: P3.7 (WP) A nylon [E = 360 ksi; v = 0.4] rod (1) having a diameter d, = 2.00 in. is placed inside a…

Q: A hollow steel [E = 30,000 ksi] tube (1) with an outside diameter of 3.125 in. and a wall thickness…

Concept explainers

Axial Load

When a bar of the uniform cross-section is acted by a load, such that the load acts along the longitudinal axis of the bar, such kinds of loadings are known as axial loadings. In general terms, a load is an external force acting on a component. An axial load acts perpendicular to the geometric cross-section of the component. Based on the direction of the application of the load, an axial load can be tensile or compressive. The analysis of bodies under the action of axial loads is generally studied under the branch of mechanics, known as statics.

Question

H.W.6: A hollow circular cold-rolled bronze [G, = 6,500 ksi]
tube (1) with an outside diameter of 1.75 in. and an inside diam-
eter of 1.25 in. is securely bonded to a solid 1.25-in.-diameter
cold-rolled stainless steel [G2 = 12,500 ksi] core (2) as shown in
Figure
and the allowable shear stress of core (2) is 60 ksi. Determine
. The allowable shear stress of tube (1) is 27 ksi,
(a) the allowable torque T that can be applied to the tube-and-
core assembly.
(b) the corresponding torques produced in tube (1) and core (2).
(c) the angle of twist produced in a 10-in. length of the assembly
by the allowable torque T.
(1)
T
TA
FIGURE

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 2 steps with 1 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

In the figure, the horizontal rigid beam ABCD is supported by vertical bars (1) and (2) and is loaded at points A and D by vertical forces P = 28 kN and Q = 40 kN, respectively. Bar (1) is made of aluminum [E = 70 GPa] and has a cross-sectional area of 210 mm² and a length of L₁ = 7.3 m. Bar (2) is made of steel [E = 200 GPa] and has a cross-sectional area of 355 mm² and a length of L₂ = 5.2 m. Assume dimensions a = 3.6 m, b = 2.6 m, and c = 2.2 m. Determine the deflection of the rigid beam (a) at point A and (b) at point D. (a) VA = (b) VD = i tel L₁ mm mm B (1) b L₂ 3,V C (2) X₂U D
Stiven: A 2 in diameter Rod wo in long elongares 0.12 in under L load of 60 kip. The diamurer of Rod decrease 0.004 in during loading modulus of Elasticity? Poisson's ratio?" and " ↓ uw T (ks i) = Find moddus of Rigidity ? ↓ UniT (ksi] unit 1
Rigid bar ABCD is supported by a smoth pin at D and by vertical aluminum alloy [E=10,000 ksi] bars attached at joints A and C. Bar (1) was fabricated to its intended length L1=40 in. Bar (2) was intended to have a length of 60 in.; however, its actual length after fabrication was found to be L2=59.88 in. To connect it to the pin at C on the rigid bar, bar (2) will need to be manually stretched by Δ=0.12 in. After bar (2) has been stretched and connected to the pin at C, a load P=20 kips is applied to the rigid bar at B. Use the following additional properties and dimensions: A1=A2=0.75 in2, a = 36 in, b =54 in, and c = 48 in. Determin: a) The normal stresses in bars (1) and (2). b) The deflection at A of the rigid bar.
II. A circular column is made of concrete [E. 4.2(10³)ksi] while being reinforced with six steel rods [Est = 29 (10³)ksi]. It is acted upon 4 in. - 30 kip by an axial force of 30 kip as shown in the figure to the right. Each rod has a diameter of 0.85 in. 3 ft Solve for the following: a) Force in each steel rod, Pst b) Force in the concrete, P. c) Stress in each steel rod, Ost = kip kip %3D ksi d) Stress in the concrete, oc = ksi
Note: give me complete solution a,b,c,d and e. I don't want single answer. Please solve completely
A hollow steel [E = 30,000 ksi] tube (1) with an outside diameter of 3.50 in. and a wall thickness of 0.219 in. is fastened to a solid 2.00-in.-diameter aluminum [E = 10,000 ksi] rod. The assembly is attached to unyielding supports at the left and right ends and is loaded as shown. Assume P=18 kips, Q=10 kips, L1=6 ft, L2=7 ft, and L3=7 ft. (A) Calculate the cross-sectional area of steel tube (1), A1, and the cross-sectional area of the aluminum rods (2) and (3). in inches squared (B) Find the force in the steel tube (1), F1, and the forces F2 and F3, which are the forces in the aluminum rods. Use the correct sign for each force. By convention, a tension force is positive, and a compression force is negative. IN kips (C) Find σ1, σ2, and σ3, the normal stresses in members (1), (2), and (3), respectively. By convention, a tension stress is positive, and a compression stress is negative. IN KSI (D) Determine δ1 and δ2, the deformations of members (1) and (2), respectively. By…
A load P is supported by a structure consisting of rigid bar ABC, two identical solid aluminum alloy [E = 73 GPa] rods (1), and a solid bronze [E = 105 GPa] rod (2). The aluminum rods (1) each have a diameter of 10 mm and a length of L₁ = 2.7 m. They are symmetrically positioned relative to middle rod (2) and the applied load P. Bronze rod (2) has a diameter of 25 mm and a length of L₂ = 1.7 m. If all bars are unstressed before the load P is applied, determine the normal stresses in the aluminum and bronze rods after a load of P = 70 KN is applied to the rigid bar. L₁ B Answer: 01 = i 0₂ i L2 (2) (1) (1) MPa MPa
Rigid bar ABCD is supported by a pin connection at A and by two axial bars (1) and (2). Bar (1) is a 30-in.-long bronze [E = 15900 ksi, 9.4x 10-6/°F] bar with a cross-sectional area of 1.00 in.?. Bar (2) is a 48-in-long aluminum alloy [E = 9200 ksi, a = 12.6 x 10-6/°F] bar with a cross-sectional area of 2.50 in.?. Both bars are unstressed before the load Pis applied. Assume L1=30 in., L2=48 a = %3D in., a=32 in., b=44 in., and c=14 in. If a concentrated load of P = 29 kips is applied to the rigid bar at Dand the temperature is decreased by 120°F, determine: (a) the normal stresses in bars (1) and (2). (b) the normal strains in bars (1) and (2). (c) the deflection of the rigid bar at point D. (2) L2 A B D L1 (1)
A steel [E = 30,300 ksi; a = 6.7 x 106/°F] pipe column (1) with a cross-sectional area of A₁ = 5.70 in.² is connected at flange B to an aluminum alloy [E = 10,100 ksi; a = 12.7 x 10-6/°F] pipe (2) with a cross-sectional area of A₂ = 4.30 in.². The assembly (shown in the figure) is connected to rigid supports at A and C. It is initially unstressed at a temperature of 90°F. Assume L₁ = 126 in., L₂ = 156 in., P = 34 kips. (a) At what temperature will the normal stress in steel pipe (1) be reduced to zero? (b) Determine the normal stresses (positive if tensile, negative if compressive) in steel pipe (1) and aluminum pipe (2) when the temperature reaches -11°F. A Answers: (a) T= (b) σ₁ = 0₂ = L₁ tel i L2 °F ksi ksi
Q-A solid 75-mm-diameter Aluminum [E = 80 GPa and 0.3 Poisson ratio] shaft that is 1.25-m long extends through and is completely bonded to a hollow brass |G = 25 GPa] tube, as shown in Figure. Brass tube (1) has an outside diameter of 10 cm, an inside diameter of 75 mm, and a length of 0.75 m. Both the aluminum shaft and the brass tube are securely attached to the wall support at A. When the two torques shown are applied to the composite shaft, determine: (a) The maximum shear stress magnitude in brass tube (1) and Aluminum shaft segment (2) and (3). (b) The rotation angle of joint B and the rotation angle of end c. (1) 30 KN m 12 kN-m Figure 0.5 m
A load P is supported by a structure consisting of rigid bar ABC, two identical solid bronze [E = 15,000 ksi] rods, and a solid steel [E = 30,000 ksi] rod, as shown. The bronze rods (1) each have a diameter of 0.555 in. and they are symmetrically positioned relative to the center rod (2) and the applied load P. Steel rod (2) has a diameter of 0.355 in. If all bars are unstressed before the load Pis applied, determine the normal force in steel rod (2) after a load of P = 22 kips is applied. (2) 60 in. (1) (1) 24 in. O 2.17 kips O 2.49 kips O 3.09 kips
A steel [E = 30,100 ksi; a = 6.3 x 10-6/°F] pipe column (1) with a cross-sectional area of A₁ = 5.80 in.² is connected at flange B to an aluminum alloy [E = 10,700 ksi; a = 13.1 x 10-6/°F] pipe (2) with a cross-sectional area of A₂ = 3.50 in.². The assembly (shown in the figure) is connected to rigid supports at A and C. It is initially unstressed at a temperature of 92°F. Assume L₁ = 115 in., L₂ = 149 in., P = 22 kips. (a) At what temperature will the normal stress in steel pipe (1) be reduced to zero? (b) Determine the normal stresses (positive if tensile, negative if compressive) in steel pipe (1) and aluminum pipe (2) when the temperature reaches -11°F. A (1) L₁ B P P L2 с