Final purification stage in the preparation of a pharmaceutical product A from natural sources require centrifuging and continuous filtration as depicted in the figure below. Determine the flow rate of the recycl stream in kg/h. Feed, 100 kg h (20% 4 in water) Recycle, 0.5 kg of 4/kg of water Centrifuge Water 65% 4,35% water Filter Product, 93% 4,7% water

Q: EXTRACTION If a feed component is not soluble in the solvent, where does it exit? a. Raffinate…

A: In extraction  A Feed component is insoluble in solvent  Find -Where will be that component after…

Q: A 75-gallon vessel is prepared for placing into service. Use a sweep-through purging method, to…

A:

Q: In the biomass gasification process to improve Hz production performance, spherical particles of the…

A: The given question is a question of fluidization which involves application of minimum fluidization…

Q: Silica gel is to be used to separate a mixture of butane and butylene. The feed containing 55%…

A: Given :Feed at the bottom contains-Basis feed= 100 mol (supposed)Butane= 55% = 55 molButylene= 45%…

Q: There are 300 cubic meter/min of atmospheric air initially at 25 C wet bulb temperature and 60 % RH…

A:

Q: A solution is prepared by mixing 5.00 mL of 0.00100M iodine, 10 mL of 0.500M HCl, and 10 mL of 2.00M…

A: A Solution containing 5.00 mL of 0.0010 M  iodine      10ml of .005 HCl     10 mol of  2.00 M…

Q: The aqueous acetone solution is mixed with Methyl isobutyl (MIB) solvent containing 3% acetone by…

A: It is given that an aqueous acetone solution is mixed with methyl isobutyl (MIB) solvent. The…

Q: In the biomass gasification process to improve Hz production performance, spherical particles of the…

A: The given question is a question of fluid mechanics which involves application of erguns equation in…

Q: Estimate the hydrostatic pressure applied in a reverse osmosis system working at 10°C to maintain a…

A: Given that, the system is a reverse osmosis system for which temperature, T= 10⁰C = 10⁰+273 = 283 K…

Q: Final purification stage in the preparation of a pharmaceutical product A from natural sources…

A:

Q: To make an instant tomato soup, a company makes soup powder from liquid step by a two-step process:…

A:

Q: The aqueous acetone solution is mixed with Methyl isobutyl (MIB) solvent containing 3% acetone by…

A: Given, The molar flow rate of the lower stream, B = 400 kg/h The molar flow rate of the upper…

Q: - Determine the pH of a buffer solution made by adding 60 mL of 0.80 M HCIO to 40 mL of 0.2 M NACIO.…

A: Volume of HClO = 60 ml = 0.06 L  Molarity of HClO = 0.80 M Volume of NaClO = 40 ml = 0.04 L…

Q: An evaporator-crystallizer-filter process is used to obtain solid potassium sulfate from an aqueous…

A: Given, Temperature of product=23oC from the given table, from interpolation 30-2030-23=11.5-1011.5-x…

Q: 1. A 100 kg of 20% aqueous solution of was fed in a diluting stream of pure water to produce a 8%…

A:

Q: The test kits used to determine COD contain chemicals that react with the organic compounds n an…

A: It is the measure of quality of water. Test is based on the assumption that strong oxidizing agent…

Q: Casein is to be washed, in a multistage system, by water. The casein curd has initially a water…

A: To determine the number of washing steps needed to reduce the lactose content of casein to less than…

Q: When you conduct the energy balance around a system, taking into account heat, work and friction,…

A: 9-Levels of transport phenomena-Choose correct option 10-Not a example of convective transfer-Choose…

Q: Design a countercurrent liquid-liquid extractor to separate acetone from methyl isobutyl ketone…

A: To find:Design a countercurrent liquid-liquid extractor to separate acetone (solute) from methyl…

Q: leaching

A: Leaching and extraction are two unit process to extract a substance from a mixture. The major…

Q: Silica gel is to be used to separate a mixture of butane and butylene. The feed containing 55%…

A: A substance molecule's retainment onto a solid's surface or liquid's surface is an adsorption…

Q: Silica gel is to be used to separate a mixture of butane and butylene. The feed containing 55%…

A: Given that- Feed at the bottom contains- Basis feed= 100 mol (supposed) Butane= 55% = 55 mol…

Q: In the biomass gasification process to improve H; production performance, spherical particles of the…

A: Given: Spherical particle size of catalyst is 0.07mm and density of 3961 kg/m3,  Reactor diameter…

Q: Problem 2 An aqueous solution containing 60% Na2S₂O3 and 1% soluble impurities is diluted with water…

A: Given that- Basis feed= 100 kg  Na2S2O3 =60% =60 kg Solid impurities= 1 % = 1kg Final dried product…

Q: A chromatography column is used to separate four amino acids: glutamic acid, serine, alanine, and…

A: Since you have posted multiple questions, we will provide the solutiononly to the first question as…

Q: Determine what would happen if saturated liquid feed is replaced with a subcooled liquid feed and…

A: When feed is subcooled  When a subcooled feed at feed tray then vapor coming from bottom condense at…

Q: 60% NaOH is to be concentrated in a triple effect evaporator to 15% NaOH. If equal amount of water…

A: The tripple effect evaporator system has been shown in figure The feed rate is F=100 kg/hr (Taking…

Q: The feed to a distillation column contains 36% benzene by weight, the remaining being toluene. The…

A:

Q: i- Considering dilute solution, convert the values given for the mass transfer coefficients into k'x…

A: Hello. Since your question has multiple sub-parts, we will solve first three sub-parts for you. If…

Q: Two distillation columns in series are used to enhance the recovery of a desired component. In one…

A:

Q: Given the set of information above, determine the following: A) Number of ideal stages and the…

A: Given Data :   Feed :   F=10000 kg/h,    xF =0.4,   xD=0.97,   xW=0.03 ,   R=3q    feed at bubble…

Q: Final purification stage in the preparation of a pharmaceutical product A from natural sources…

A: Given that,  The mass flow rate of feed F = 100 kg/h The composition of feed = 0.2 kg of A/kg of…

Q: bypass stream

A:

Q: Silica gel is to be used to separate a mixture of butane and butylene. The feed containing 55%…

A:

Q: A sludge thickener is used to concentrate waste sludge before sending the thickened sludge to a…

A: In wastewater treatment, the sludge thickener is the type of equipment of process of wastewater…

Q: 60% NaOH is to be concentrated in a triple effect evaporator to 15% NaOH. If equal amount of water…

A: Given  60%NaOH is concentrated in a triple effect evaporator to 15 %NaOH And equal amount of water…

Q: Final purification stage in the preparation of a pharmaceutical product A from natural sources…

A: The pharmaceutical product A is prepared by centrifuging and continuous filtration process. Given…

Q: 6. During Basic Oxygen Process to manufacture low carbon stainless steel, 600 kg of cast iron (6% of…

A:

Q: It is desired to produce 7% NaNO3 solution continuously according to a process described in the…

A:

Q: 2) Filtration involves the separation of solid particles from fluid through a filtering medium and…

A: Principles of filtration to be explained. Also an example with illustration to be given.

Q: Silica gel is to be used to separate a mixture of butane and butylene. The feed containing 55%…

A: Feed at the bottom contains-Basis feed= 100 mol (supposed)Butane= 55% = 55 molButylene= 45% =45 mol

Q: In recovery a carboxylic acid from the fermentation broth, packed extraction tower has been used.…

A: To discuss the possible reasons and proposed solutions if the extraction process did not achieve the…

Q: The sludge removed from the sludge zone of the settling tank is 103.68 kg/day has a solids…

A: Thickening is also said to be sedimentation. The solids are settled at bottom of the thickener tank…

Q: 68%NaOH is to be concentrated in a triple effect evaporator to 16% NaOH.If equal amount of water is…

A: Assume a feed rate that will be the basis for this system. There are two streams which are vapor…