Figure Q2(a) illustrates the plan view and sectional view of a simple structure.Slab ABCD is supported by beams along AB, BC, CD and AD. The columns arelocated at points A, B, C and D. Consider the factored loading on slab is 8 kN/m?and factored self-weight of beam 2.5 kN/m.Calculate the total loading to be supported by column A.- 6 mAВ2.75 mCDPlan view6 mSlabВeam-BeamColumnColumnSection X-X viewFigure Q2(a)

Factored Load on slab =8 kN/m2 Factored self weight of beam= 2.5 kN/m AB=DC= 6m AD=BC=2.75 m Unit…

Figure Q2(a) illustrates the plan view and sectional view of a simple structu Slab ABCD is supported by beams along AB, BC, CD and AD. The columns located at points A, B, C and D. Consider the factored loading on slab is 8 kN/h and factored self-weight of beam 2.5 kN/m. Calculate the total loading to be supported by column A. - 6 m B 2.75 m X

Figure Q2(a) illustrates the plan view and sectional view of a simple structu Slab ABCD is supported by beams along AB, BC, CD and AD. The columns located at points A, B, C and D. Consider the factored loading on slab is 8 kN/h and factored self-weight of beam 2.5 kN/m. Calculate the total loading to be supported by column A. - 6 m B 2.75 m X

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

Defferentiate the following terms; 1.Resilience and proof resilience 2.proof resilience and modulus of resilience B)A solid beam ABC circular in section has varying sections.portion AB is 6m in length and diameter of 250mm while portion BC is 2m in length and section diameter of 100mm.The beam is subjected to a sudden tensile load.if the maximum stress induced is 400MN/m^2.Determine the strain energy stored in the beam.Take E=200GN/m^2
Draw the normal stress distribution in the most stressed section for the beam whose loading condition is given in the .figure .(NOTE: Ignore the shear effect. K.Ç. = Line of Forces) P= 10.5 KN, q= 5 KN/m a=6.3 m, b= 5.3 m c=23.4 cm, d= 13.4cm, e = 8.4 cm ' 2d te q b a K.Ç. M 01 с e
A rectangular reinforced concrete beam has a cross-section dimensions b=400mm andoverall depth h= 800mm. The beam as shown in the image below carries asuperimposed dead load of 12 kN/m (excluding the self-Weight of the beam) andspecified live load of 20 kN/m. The beam has a compressive strength of 30Mpa andreinforcement yield strength of 400 Mpa. Draw the factored shear force and bending moment diagram for all loads includingbut not limited to self weight of the beam
A prismatic beam having 250 mm x 500 mm is reinforced for flexure at the bottom with 4-ϕ20 mm with an effective depth of 420 mm. It is simply supported over a span of 6 m and designed to support uniformly distributed load over the entire span. Concrete weighs 24 kN/m3, Concrete strength f’c = 21 MPa and rebar strength fy = 280 MPa. 1. Determine the resulting depth of the uniform rectangular stress block in mm when the beam section reaches utlimate stage. (A to D) 2. Determine the nomina moment strength in kN/m of the beam section as per NSCP 2015. (E to H) 3. Determine the factored uniform load in kN/m the beam can sustain in addition to its factored self weight. (I to L) Correct Answers: B. 78.85 G. 133.91 K. 26.16
20 kN/m 5 m 30 kN 5 m 10 kN W610 x 82 The W610 x 82 beam shown above has a Young's modulus of E = 200 GPa, an allowable bending stress of Jallow = 300 MPa and an allowable shear stress of Tallow = 150 MPa. a) Draw the SFD and BMD of the beam and indicate Mmax and Vmax- b) Determine if the beam is sufficiently strong to support the applied loads. c) Assuming that the beam is sufficient, what is the vertical deflection and slope at the free end?
An embedded beam is subjected to the loads shown. Determine the stress produced at points A, B ,C, D in the embedment section. The X axis is 72.9 mm from the top edge. Solve correctly please
A 5-m long, simply supported beam is loaded as shown. Determine the lightest W-shape beam that can be used such that the flexural stress will not exceed 94 MPa. Use the table for standard properties of W-shape beams. Also, determine the actual maximum stress (in MPa) in the selected W-shape beam. As for other values: P1 = 124 kN P2 = 105 kN P3 = 183 kN %3D
A cantilever beam with length of 3.2 m is reinforced with As=5720 mm^2 tension reinforcement and compression reinforcement A's =1905 mm^2 placed at 60 mm from extreme compression fiber. The effective depth is 550 mm and width of 400 mm. Use f'c=35 MPa and fy=415 MPa. 1. Calculate the magnitude of the neutral axis. 2. Determine the compressive force of the section. 3. Determine the safe concentrated live load that can be placed at the free end if the beam carries a total ultimate uniform load of 35 kN/m.
1. The cross section of a continuous one-way solid slab in a building is shown below. The slabs are supported by beams that span 12 ft between simple supports. The dead load on the slabs is that due to self-weight plus 77 psf of superimposed dead load; and the live load is 130 psf. Design the continuous slab and draw a detailed section. Given: f'c = 3ksi and fy = 40 ksi Use a combination of #3,4,5 for main reinforcement. Use #3 for transverse reinforcement. You don't need to consider the 2-way effect near girders. A C D E 1₁ B -11' 11'- D D E -11'- D