Figure P12.87 87. A 40-kg sharpening wheel of radius 0.10 m is rotating at 3.3 revolutions per second. An axe is pressed against the rim with a force F directed as shown in Figure P12.87 so that it takes the wheel 10 seconds to come to a halt when there is no power driving the wheel. Treat the wheel as a disk, and assume a coefficient of kinetic friction between the wheel and the axe blade of μ = 0.35. Find the value of F... wheel is Figure P12.88

Figure P12.87 87. A 40-kg sharpening wheel of radius 0.10 m is rotating at 3.3 revolutions per second. An axe is pressed against the rim with a force F directed as shown in Figure P12.87 so that it takes the wheel 10 seconds to come to a halt when there is no power driving the wheel. Treat the wheel as a disk, and assume a coefficient of kinetic friction between the wheel and the axe blade of μ = 0.35. Find the value of F... wheel is Figure P12.88

College Physics

11th Edition

ISBN:9781305952300

Author:Raymond A. Serway, Chris Vuille

Publisher:Raymond A. Serway, Chris Vuille

Chapter1: Units, Trigonometry. And Vectors

Section: Chapter Questions

Problem 1CQ: Estimate the order of magnitude of the length, in meters, of each of the following; (a) a mouse, (b)...

See similar textbooks

Similar questions

In the figure, a small 0.473 kg block slides down a frictionless surface through height h = 1.06 m and then sticks to a uniform vertical rod of mass M = 0.946 kg and length d = 2.74 m. The rod pivots about point O through angle before momentarily stopping. Find 0. A Number Units h
A uniform rod is set up so that it can rotate about an axis at perpendicular to one of its ends. The length and mass of the rod are 0.893 m and 1.19 kg, respectively. A force of constant magnitude F acts on the rod at the end opposite the rotation axis. The direction of the force is perpendicular to both the rod's length and the rotation axis. Calculate the value of F that will accelerate the rod from rest to an angular speed of 6.31 rad/s in 8.87 s. F = N
A solid cylinder is mounted above the ground with its axis of rotation oriented horizontally. A rope is wound around the cylinder and its free end is attached to a block of mass 55.0 kg that rests on a platform. The cylinder has a mass of 255 kg and a radius of 0.490 m. Assume that the cylinder can rotate about its axis without any friction and the rope is of negligible mass. The platform is suddenly removed from under the block. The block falls down toward the ground and as it does so, it causes the rope to unwind and the cylinder to rotate. (a) What is the angular acceleration, in rad/s², of the cylinder? rad/s2 (b) How many revolutions does the cylinder make in 5 s? rev (c) How much of the rope, in meters, unwinds in this time interval?
A uniform solid disk of mass m = 3 kg and radius r= 1 m rotates about a fixed axis perpendicular to its face with angular frequency 6 rad/s. What is the magnitude of the angular momentum when the axis of rotation passes througha point midway between the center and the rim? Yanıtınız
A uniform disk with radius R = [R} m and mass [M} kg rotates in a horizontal plane on a frictionless vertical axle that passes through the center of the disk. The angle through which the disk has turned varies with time according to 0(t) =1.4t + 6.9t2 rads. What is the angular velocity(rad/s) of a point on the rim of the disk at the instant after 1.2 rev.
A uniform rod is set up so that it can rotate about an axis at perpendicular to one of its ends. The length and mass of the rod are 0.765 m and 1.27 kg respectively. A force of constant magnitude ?F acts on the rod at the end opposite the rotation axis. The direction of the force is perpendicular to both the rod's length and the rotation axis. Calculate the value of ?F that will accelerate the rod from rest to an angular speed of 6.21 rad/s in 9.91 s
In the figure, a wheel of radius 0.234 m is mounted on a frictionless horizontal axis. The rotational inertia of the wheel about the axis is 0.586 kg-m2. A massless cord wrapped around the wheel's circumference is attached to a 4.00 kg box. The system is released from rest.When the box has a kinetic energy of 4.00 J, what are (a) the wheel's rotational kinetic energy and (b) the distance the box has fallen? Assume free-fall acceleration to be equal to 9.81 m/s2. M (a) Number Units (b) Number Units
A bicycle wheel with a radius of 350 mm and a mass of (2.40x10^0) kg is spinning freely on a work stand at a rate of 2.0 rev/sec when a (1.0000x10^0) kg kitten jumps on it radially, holds on and starts spinning around. What is the new rotational velocity of the wheel in units of rev/s? Treat the wheel as a thin hoop. Give your answer with three significant figures.
A metal ball with 0.27 kg of mass and 0.050 m of radius rolled without slipping on a horizontal floor. A ramp was placed on the floor. The ball rolled up the incline without slipping to a vertical height of 0.47 m before stopping. The ramp has a length of 1.7 m along the incline. Find the speed of the ball before it reached the ramp. Hint: the ball has rotational kinetic energy. The rotational inertia of a solid sphere is (2/5)mr^2.
A horizontal platform in the shape of a circular disk rotates on a frictionless bearing about a vertical axle through the center of the disk. The platform has a radius of 4.08 m and a rotational inertia of 365 kg·m2 about the axis of rotation. A 53.9 kg student walks slowly from the rim of the platform toward the center. If the angular speed of the system is 1.43 rad/s when the student starts at the rim, what is the angular speed when she is 0.609 m from the center?
A uniform disk (1=1/2 mR2) has a mass of 3 kg and a radius of 2m. The disk is mounted on frictionless bearings and is used as a turntable. The turntable is initially rotating at 120 rpm (revolutions per minute, convert it to rad/s). A hollow cylinder has the same mass and radius as the disk. It is released from rest, just above the turntable, and on the same vertical axis. The hollow cylinder slips on the turntable for 0.20 s until it acquires the same final angular velocity as the turntable. (HINT: Note that some of the information given is not needed! Think which conservation law(s) apply.) The final angular momentum of the system is closest to: L = Submit [5] ΑΣΦ Request Answer ? kg. m²/s 4
A cylindrical metal drum, with a radius of 0.25 m, has an inertia of 11.0.kg. The drum is hollow and you may neglect the inertia of the top and bottom of the drum. The drum is free to rotate about an axle that runs through its centre and along its long axis. A cord is wrapped around the drum. The cord is pulled straight from the drum with a constant force of 60 N. As the cord unwinds, the drum rotates, with no slippage between the cord and the drum. (a) Calculate the work done by person pulling the cord as the drum rotates through 100 radians. Give your answer in Joules (b) Assuming the drum starts from rest, what is the rotational speed of the tyre after it has rotated through 100 radians? Give your answer in rad.s