Example 9.36. Design a Zeolite-Softener for an industrial concern, using the following data : (i) Qty. of soft water required per hour = 25,000 litres (ii) Hardness present in raw water as CaCO, = 400 ppm. (iii) Hardness to be obtained in the treated supplies = 50 ppm. (iv) Ion exchange capacity of the zeolite = 10 kg of hardness per cu. m. of zeolita (v) Salt required for regeneration of exhausted zeolite = 50 kg per cu. m. of zeolite. Also assume that the industry works for 2 shifts of 8 hours each, per day. Make suitable assumptions where needed, if not given. %3D %3D

Example 9.36. Design a Zeolite-Softener for an industrial concern, using the following data : (i) Qty. of soft water required per hour = 25,000 litres (ii) Hardness present in raw water as CaCO, = 400 ppm. (iii) Hardness to be obtained in the treated supplies = 50 ppm. (iv) Ion exchange capacity of the zeolite = 10 kg of hardness per cu. m. of zeolita (v) Salt required for regeneration of exhausted zeolite = 50 kg per cu. m. of zeolite. Also assume that the industry works for 2 shifts of 8 hours each, per day. Make suitable assumptions where needed, if not given. %3D %3D

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

8 - Which of the following properties is the difference that distinguishes Silica fume from other pozzolan? I. Increases late strengths. II. It increases early strengths. III. It increases the need for water. IV. It increases the temperature of hydration. V. Decreases the heat of hydration. A) I, II, and VB) I and VC) Solo IIID) II, III and IVE) I, II, III
I need the answer quickly
When the exponential trend line of iron concentration vs time is y=4.2 exp(-0.24x) x is time in min and y is concentration of phen iron complex solution.
Chose the correct answer 1- The Unit measurement of suspended solids is ...A- kg 2- The Unit measurement of Turbidity is A- °C is B-m B-NTU C- mg/L C-K 3- The Unit measurement of pH www A-mg/L 4- The Unit measurement of alkalinity is .. 5-Non toxic metals includes 6-Dissolved materials size is lees than A- 10 mm D- none of above D- none of above D- none of above B- p.p.m C- g/m³ D- none of above A- m/sec B- m³/sec C- mg/L A-Chromium B- Mercury C- Calcium D- none of above B- 106, C-108 mm D- none of above mm 7- Public standards of Hardness in drinking water is A-500 mg/L B-50 mg/L C-100 mg/L D- none of above 8- Alkalinity species includes are A-HCO3 B-CO3 C- OH D-All of above ... 9- Dental cavities in children can prevented when Drinking water has Fluoride concentration of A- 0.1 mg/L B- 1 mg/L C- 10 mg/L D- none of above 10- Toxic metals are metals that harmful to humans even when exists in concentration of .. A- Small B-Large C-zero D- none of above
The porous material comprised of same-size spheres, the permeability equation provide what kind of results and where it is used?
10) Table 1 and Table 2 list the general properties and the production alternatives for various pozzolans. |Table 1 Chemical Composition SiO2, % B D 35 93 35 50 A½O3, % Fe3O2, % Саб, % Physical Property Blaine fineness, m²/kg Color 20 0.4 12 25 0.4 10 25 1.6 40 5 430 Gray 19,000 Gray 400 White 390 Gray Production Method a byproduct of producing silicon metal or ferrosilicon alloys 2 Table 2 a by-product in coal fired power stations formed when molten iron blast furnace slag is rapidly chilled (quenched) by immersion in water A dehydroxylated form of the clay mineral kaolinite 3 For the four pozzolans given in the first column of Table 3, fill the remaining columns with the corresponding letters and numbers: • Column 2 - Determine which one is which pozzolan (from Table 1): (A/B/C/D) • Column 3 - Identify the natural and artificial pozzolans: (N/A) • Column 4 - Determine which ones are self-cementing. Column 5 - Determine the production method (from Table 2): (1/2/3/4) Table 3…
1. If the ductility at 25 deg. Con the original binder is 50 cm, one expects that the ductility on the RTFO residue will be 50 cm. a) The same as b) More than c) Less than 2. If the penetration at 25 deg. Con the original binder is 60 PEN, one expects that the penetration on the RTFO residue will be a) 40 PEN b) 60 PEN c) 150 PEN 3. For an increase in the Viscosity at 60 deg. C, the Flash Point for the asphalt binder will be a) The same b) Higher c) Lower 4. Among the components of an asphalt binder, an increase in the Oils will the Flash Point. a) Increase b) Decrease c) Maintain
My question is in the picture
The following information is given for n-pentane at 1 atm:boiling point = 36.20°C ΔHvap (36.20°C) = 357.6 J/g melting point = − 129.7°C ΔHfus (−129.7°C) = 116.7 J/g specific heat gas = 1.650 J/g ⋅ °C specific heat liquid = 2.280 J/g ⋅ °C A 26.10-g sample of liquid n-pentane is initially at −51.40°C. If the sample is heated at constant pressure (P = 1 atm), how many kJ of energy are needed to raise the temperature of the sample to 65.30°C?
The chemical analysis of a water sample indicates the presence of cations as [Na*] = 1 milli mol/I, [Ca+2] = 2 milli mol/1, and [Mg+2] = 3 milli mol/1. Compute the hardness [in terms of Cao (mg/l)]. The weight of Na*, Ca*2, Mg*2 and Cao are 23, 40, 24 and 56 g/mol.
The nutural frequancy for the system is equal to Ek rigid uniform bar of mass (m) P b 1 3kb²+PL 2n mL² the Answer is 1 3kb2 –3PL mL²
27 Material Science and Engineering