EXAMPLE 3 Consider the heat exchanger finned-tube, cross-flow heat exchanger with a gas-side overall heat transfer coefficient and area of 100 W/m² • K and 40 m², respectively. The water flow rate and inlet temperature remain at 1 kg/s and 35C. However, a change in operating conditions for the hot gas generator causes the gases to now enter the heat exchanger with a flow rate of 1.5 kg/s and a temperature of 250C. What is the rate of heat transfer by the exchanger, and what are the gas and water outlet temperatures? that is, a

EXAMPLE 3 Consider the heat exchanger finned-tube, cross-flow heat exchanger with a gas-side overall heat transfer coefficient and area of 100 W/m² • K and 40 m², respectively. The water flow rate and inlet temperature remain at 1 kg/s and 35C. However, a change in operating conditions for the hot gas generator causes the gases to now enter the heat exchanger with a flow rate of 1.5 kg/s and a temperature of 250C. What is the rate of heat transfer by the exchanger, and what are the gas and water outlet temperatures? that is, a

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

In a double-pipe, counter-flow heat exchanger, water entering at 1 kg/s is heated from 23°C to 69°C as it flows thru the inner pipe. Hot oil enters the heat exchanger at 2 kg/s and 110°C. The convection heat transfer coefficients in the cold- and hot- sides are 100 and 50 kW/m2.°C, respectively. Calculate the required heat transfer area in m?. Take c, = 4.18 kJ/kg.°C for water, and c, = 1.67 kJ/kg.°C for oil. Round your answer to 2 decimal places.
Okuma lis A iş İÇİN Giriş yap İNGİLİZCE Cold water entering an opposing flow heat exchanger at a flow rate of 0.6 kg/s at 20 oC (cp =4180 J/kg.K) with a flow rate of 0.75 kg/s of oil (cp = 2200 J/kg.K) it is used for cooling from 110 OC to 85 oC. If the total heat transfer coefficient is 800 W/ m2.lf K, What is the heat transfer area of the heat exchanger? %3D Çeviri yap: Google Bing
Need answer ASAP In a counter-current-flow tubular heat exchanger, a liquid food (milk),flowing in the inner pipe, is heated from 20 to 40°C. In theouter pipe the heating medium (water) cools from 90 to50°C. The overall heat-transfer coefficient based on the insidediameter is 2000 W/(m^2-°C). The inside diameter is 5 cm andlength of the heat exchanger is 10 m. The average specific heatof water is 4.181 kJ/(kg-°C). Calculate the mass flow rate ofwater in the outer pipe. Compare the amount of milk being heated to concurrent design.
A parallel flow heat exchanger is to be designed to heat 4535 kg/hr of water from 21°C to 43°C with the steam condensing at 121°C on the outside of the tubes. Tubes of 2.54 cm outside diameter and 2.286 cm inside diameter, 2.44m long, are available for use. Assuming that the average steam-side coefficient is 5675 W/m²-°C, and the thermal conductivity of the tube metal is 110.73 W/m²-°C, calculate the required number of tube per pass. Assume that the velocity of the water entering each tube is equal to 0.457 m/sec. a. 7 c. 9 b. 8 d. 10
310 m algunaourtsdi bayon bozu (A) In a food processing plant a brine solution is heated from 6°C to 12°C in a double pipe heat exchanger by water entering at 50°C and leaving at 40°C at the rate of 0.166kg/s. If the overall heat transfer coefficient is 850 W/(m².K), what heat exchanger area is required for (1) parallel flow heat exchanger and (2) counter flow heat exchanger. Discuss the results?. Take C₂ (for water)= 4.180 kJ/kg.K mbmeod (isolev si ma do liw novel
A one-shell pass and two-tube passes heat exchanger must transfer 300 kW to a solution with a specific heat of 3.28 kJ/kg-K and change its temperature from 60 C to 88 C. Steam is available at 120 C. The unit convective coefficient is 3200 W/m2-K for the inside and 8500 W/m2-K for the outside. The thermal conductivity for the tubes is 115 W/m-K and the tubes have 4 cm OD and 3 cm ID and are 3 m long. Determine the number of tubes required.
Calculate the liquid flow rate for a heat exchanger with one tube pass. The liquid is heated from 20°C to 93°C by a hot gas at 260°C and 0.45 kg/s. A-4.64 m², U-280 W/m²
How would you formulate this problem to obtain a more meaningful result which desired to cool a gas has [Cp = 0.35 Btu/(Ib)(°F)] from 190 to 95°F, using cooling water at 83°F. Water costs $0.30/1100 f, and the annual fixed charges for the exchanger are $0.60/ft of inside surface, with a diameter of 0.0775 ft. The heat transfer coefficient is U = 8 Btu/(h)(f)(F) for a gas rate of 2900 Ib/hr. Plot the annual cost of cooling water and fixed charges for the exchanger as a function of the outlet water temperature. What is the minimum total cost?
A long, thin-walled double-pipe heat exchanger with tube and shell diameters of 0.01 m and 0.025 m, respectively, is used to condense refrigerant-134a with water at 20°C. The refrigerant flows through the tube, with a convection heat transfer coefficient of hi= 4100 W/m² °C. Water flows through the shell at a rate of 0.3 kg/s. The thermal resistance of the inner tube is negligible since the tube material is highly conductive and its thickness is negligible. Both the water and refrigerant-134a flows are fully developed. Properties of the water and refrigerant-134a are constant. Water properties: p = 998 kg/m³, v=u/p-1.004x 10-6 m²/s, k = 0.598 W/m. °C, Pr = 7.01 Cold water D Do
A two-shell passes and four-tube passes heat exchanger is used to heat glycerin from 20°C to 50°C by hot water, which enters the thin-walled 2-cmdiameter tubes at 80°C and leaves at 40°C. The total length of the tubes in the heat exchanger is 60 m. The convection heat transfer coefficient is 25 W/m2∙K on the glycerin (shell) side and 160 W/m2∙K on the water (tube) side. Determine the rate of heat transfer in the heat exchanger (a) before any fouling and (b) after fouling with a fouling factor of 0.0006 m2∙K/W occurs on the outer surfaces of the tubes.