Example 1Engine oil at 60°C flows over a 5 m long flat plate whose temperature is 20°C with a velocity of 2 m/s with a surface filmtemperature of 40°C. The density, thermal conductivity, Prandlt No. and kinematic viscosity are 876 kg/m², 0.144 W/m.K,28270, and 242 x 10$ m²/s, respectively. Determine the total drag force and the rate of heat transfer per unit width of theentire plate.oilT- = 60°CV-=2 m/sT=20°C-L= 5 mWe assume the critical Reynolds number is 5x105. The properties of the oil at the film temperature are:

Given :- Too=60oc Ts=20oC Length= l=5m Width =W= unit length =1m Velocity =V=2m/s Density = e= 876…

Engine oil at 60°C flows over a 5 m long flat plate whose temperature is 20°C with a velocity of 2 m/s with a surface film temperature of 40°C. The density, thermal conductivity, Prandlt No. and kinematic viscosity are 876 kg/m³, 0.144 W/m.K, 28270, and 242 x 105 m²/s, respectively. Determine the total drag force and the rate of heat transfer per unit width of the entire plate. oil T= 60°C V-=2 m/s -T3=20°C- L=5m We assume the critical Reynolds number is 5x105. The properties of the oil at the film temperature are:

Engine oil at 60°C flows over a 5 m long flat plate whose temperature is 20°C with a velocity of 2 m/s with a surface film temperature of 40°C. The density, thermal conductivity, Prandlt No. and kinematic viscosity are 876 kg/m³, 0.144 W/m.K, 28270, and 242 x 105 m²/s, respectively. Determine the total drag force and the rate of heat transfer per unit width of the entire plate. oil T= 60°C V-=2 m/s -T3=20°C- L=5m We assume the critical Reynolds number is 5x105. The properties of the oil at the film temperature are:

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Calculate the heat transfer (in Watts) in the first 20 cm of the plate assuming unit depth, if the plate is heated to a temperature of 100C over it complete length with air flowing over it at a temperature of 27°C. [Properties of air at 63.5°C are: k = 0.02749 W/mK, v = 17.36 x 10“ m/s, Cp = 1.006 kJ/kg K and Pr= 0.7.]
Consider steady, laminar, two-dimensional flow over a hot plate. Does the convective heat transfer coefficient (h) increase, decrease, or remain constant with distance from the leading edge? Explain.
Question 1 15 points Save Answ Engine oil at 87°C flows over the upper surface of a 5-m-long flat plate whose temperature is 18°C with a velocity of 5 m/s. Determine the total drag force and the rate of heat transfer per unit width of the entire plate (Insert answer for Fp, h and Q) W/m2K kW
A stream of Air flows over the upper surface of a flat plate having a length of 10 m. Variation of temperatures measurements in the boundary layer is correlated by an expression of the form T = 785 + 50 exp (-712xy), where x and y are in meters and T in K. The thermal conductivity of air is evaluated at the arithmetic mean of the free stream and surface temperatures to be k = 0.03 W/m.K. If the air temperature is equal to 45 C and the temperature of the plate is equal to 105 C. Determine The average convection coefficient for the entire plate. Select one: O a. 98.6 W/m^2.K O b. 78 W/m^2.K O c. 89 W/m^2.K d. 66.2 W/m^2.K
er its eq =3 m2 Of nic Q2\ A long 8-cm-diameter steam pipe whose external surface temperature is 90°C passes through some open area that is not protected against the winds. Determine the rate of heat loss from the pipe per unit of its length when the air is at 1 atm pressure and 7°C and the wind is blowing across the pipe at a velocity of 50 km/h. emp. C Properties of air at 1 atm pressure 20 25 30 35 40 Cross-section of the cylinder Circle 45 50 60 70 Density p. kg/m³ 1.204 1.184 1.164 1.145 1.127 1.109 1.092 D 1.059 1.028 Fluid 1007 1007 1007 1007 1007 1007 1007 1007 1007 Gas or liquid Specific Ival GJ/kg K Air V_-50 km/h 7₂-PC Thermal Conductivity k, W/m K 0.02514 0.02551 0.02588 0.02625 0.02662 0.4-4 4-40 40-4000 4000-40,000 40,000 400,000 Range of Re 0.02699 0.02735 0.02808 0.02881 Thermal Diflusivity a, mis 2.074 x 10-5 2.141 x 10- 2.208 x 10-5 2.277 x 10-5 2.346 x 10-5 2.416 x 10- 2.487 x 10-5 10-5 2.780 x 10-5 2.632 x Pipe D-8cm T₁-90°C Nusselt number Nu== 0.989Re0.330 Pr1/3 Nu…
Determine the thermal boundary thickness(mm) of flow over a flat plate which has a 0.5 mm boundary layer thickness. Take u= 25 x 10 Pas, C,=2.0 kJ/kg K and k=0.05 W/m K.
Air at 10°C and 1 atm is flowing parallel at a velocity of 15.5 m/s over the top flat surface of copper plate. The top surface of the copper plate is 0.03m by 0.03m square. The temperature of copper plate is uniform at 65.6°C. For laminar flow, calculate the dimensionless Reymolds number (Nre) and Nussel number (NNu). Table A.3-3a. Physical Properties of Air at 101.325 kPa (1 Atm Abs), SI Units Bx (Bp²/1?) T (kJ/kg · u x T (Pa ·s, k (W/m 103 (1/K • (°C) T (K) (kg/m³) K) -17.8255.41.379 1.0048 1.62 × 6s or kg/m · s) · K) Npr (1/K) m³) 0.022500.7203.92 2.79 x 108 O 273.21.293 1.0048 1.72 × (0-5 0.024230.7153.65 2.04 × 108 10.0 283.21.246 1.0048 1.78 ×/0 0.024920.7133.53 1.72 x 108 37.8 311.01.137 1.0048 1.90%/0-S 0.027000.7053.22 1.12 x 108 Select one: O A. NRe = 27826.58; NNu =98.58 O B. NRe = 23215.74; NNu =152.68 O C. NRe = 27826.58; NNu = 152.68 O D. NRe = 23215.74; NNu =98.58
In the arctic sea, the ice sheets are melting. Let's calculate the temperautre distribution in one such ice sheet. The sheet is 2 m thick. Under the sheet there is ice-water mixture and it can be assumed that the temperature of the bottom surface of the ice sheet is approximately 0°C. Air at -20°C is blowing above the sheet. The convection coefficient of air is 15 W/m².K. The thermal conductivity of ice is 2.2 W/m.K. What is the temperautre of icesheet at its center (i.e., at 1 m from the surface)?
Topic: Heat transfer Completely solve and box the final answer. 1. A 20degC water flows to 50cmx60cm flat plate with velocity of 5.2m/s . The flat plate surface temperature is maintained at 40deg C. The air flows parallel to the 50cm side of the plate. If the kinematic viscosity of water is 78x10-8 m2/s, at what length the flow become turbulent?
Air at temperature 20 C and pressure 1 atm, flow over a flat plate at 3 m/s. The surface temperature of the plate 60 C and the plate width 30 cm, at distance 30 cm from the leading edge . Take the air properties as following, µ=2.02x10^-5 kg/m.s, k=0.0292 W/m.C, Cp=1.01 kJ/kg.C, : p = 1.128 kg/ m3, Pr=0.7 find 1-The average heat transfer coefficient. 2- Total heat transfer rate. 3- The thickness of thermal boundary layer ?
In a laminar flow over plate the thickness of hydrodynamic boundary layer is 2 mm. What will be the thickness of thermal boundary layer? Fluid properties u = 4 x 10-4 kg/m-s, k = 0.664 W/mK, Pr = 2.54