Determine the size (diameter and depth) of the secondary clarifier (s) in a municipal activated sludge treatment facility: The wastewater characteristics are: Population 250,000, Average per-capita flow rate 380 1/capita-day and Peak factor = 2.2. The suspended solids concentration is assumed to be 2500 mg/L. The over flow rate is 110 and 60 m3/d-m? for peak flow and average flow respectively and solids loading at %3D %3D flow is 110 kg/d-m2. Estimate detention time if the depth is 4.5 m. What would average be the weir loading? Also answer the following questions. (hint : you should use all 3 loading criteria) a. How many kilograms of solids are loaded onto each clarifier per day? b. If the removal efficiency is 65% then how many kilograms of solids are removed from the total flow per day? C. What is the concentration of solids in the wastewater leaving the clarifier? Determine the size (diameter and depth) of the secondary clarifier (s) at a municipal activated sludge treatment facility: The wastewater flow is 25,000 m3/d, the recycle ratio (recycle sludge flow/wastewater flow) is 0.25. The suspended solids concentration is assumed to be 2500 mg/L in the activated sludge tank. The over flow rate is 50 m3/d- m2 and solids loading is 125 kg/d-m2. Estimate detention time if the depth is 4.5 m. What would be the weir loading?

Q: For a spiral membrane filtration system, the membrane was fabricated by adding additional shims to…

A: step 1-

Q: oluble BOD5 = 80 mg/L Assume that the BOD5 of the suspended solids may be estimated as equal to 50%…

A: According to given data  A small town has been directed to upgrade its primary wastewater treatment…

Q: After primary treatment, a municipal wastewater contains 150 mg/L BOD5. The wastewater flow of 0.44…

A: Given: Influent BOD, S0=150mg/L Discharge through the aeration tank=0.44cumec HRT=6hr…

Q: The 550-bed Atlanta Hospital has a small, activated sludge plant to treat wastewater from the…

A: Given, V = 10 m x 10 m x 5 m N = 550  q = 1.50 m3 per day per bed   To find : Aeration time

Q: A detention pond receives wastewater having a constituent concentration of 500 mg/L. A discharge…

A: Solution Given Data constituent Concentration = 500 mg/L Discharge concentration= 100 mg/L Flow…

Q: A conventional activated-sludge system treats 11,000 m3/day of wastewaterin an aeration tank with a…

A: Please go through the below answerExplanation:

Q: The chloride concentration in a brine waste flow of 6.3 L/s is 15000 mg/L. The river flow upstream…

A: step 1-

Q: Wastewater from a primary treatment tank is to undergo secondary treatment in an activated sludge…

A: Given data-Hydraulic retention time (t) is 6hMean cell residence time is 7 daysBOD content at inlet…

Q: problem 4: A wastewater treatment plant with an average daily flow of 0.25 m³/s must meet 30 mg/L of…

A: Part e) is not in your question but if you want it then only write otherwise leave that.

Q: A city of 5000 persons is to be served by a low rate trickling filter with a synthetic packing (K =…

A: Wastewater treatability and packing coefficient, K= 2.2 constant characteristic of packing used,…

Q: You have a DAF with wastewater flow of 650 L/min, with a solids concentration of 15 g/L. Density of…

A: Given: Wastewater flow rate, Q = 650L/min Solids concentration = 15g/L Density of the wastewater =…

Q: A conventional activated-sludge system treats 11,000 m3/day of wastewaterin an aeration tank with a…

A: SRT = 7 DAYSExplanation:Step 1:In the context of wastewater treatment specifically with activated…

Q: After primary treatment, a municipal wastewater contains 150 mg/L BOD5. The wastewater flow of 0.44…

A: Given:Influent BOD, S0=150mg/LDischarge through the aeration tank=0.44cumecHRT=6hrTo find:Limiting…

Q: The Lo value just downstream from a sewage outfall is 60 mg/L. The DO saturation level at that point…

A: a) Calculation of critical distance:…

Q: QUESTION: A city of 5000 persons is to be served by a low rate trickling filter with a synthetic…

A:

Q: 5) The town of Camp Verde has been directed to upgrade its primary Wastewater Treatment Plant (WWTP)…

A: Aeration Tank: The aeration tank is the tank in which wastewater is mixed with the sludge and it is…

Q: Use Thomas' method to determine the BODs, k10 rate and BODultimate for a wastewater which gives…

A: A wastewater sample is given. BOD at various time intervals is given in table. Using Thomas' method,…

Q: After primary treatment, a municipal wastewater contains 150 mg/L BOD5. The wastewater flow of 0.44…

A: To determine- Aeration volume (m3)

Q: a) An activated sludge plant with recycle is evaluating its secondary clarification system. Settling…

A: Activated sludge process:  The process of removeal of suspended growth process for the solid waste…

Q: The 550-bed Atlanta Hospital has a small, activated sludge plant to treat wastewater from the…

A: Given, BOD5 after primary settling, So = 450 mg/L MLVSS = 2,600 mg/L   To find : F/M ratio

Integrated Solid Waste Management

Integrated Solid Waste Management (ISWM) is a thorough waste suppression, compost, removal and recycling Program. An effective ISWM system considers how to suppress, manage and recycle solid waste in a manner that is most efficiently to protect human health and the surrounding. ISWM system requires evaluation of public wants and demands and then selecting and merging the most effective waste management activities for the proposed demands. The main ISWM activities for solid waste management are Waste prevention, Recycling and Composting, and Combustion and Removal and waste collection in a properly planned, constructed, managed and mitigated landfill areas. Each of these requires careful designing, financing, accumulation, and delivery of activities.