Design a direct mapped cache with 1 MB of data and 6-word block size and assume a 33-bit address. Select the index of the cache and must keep the calculations by showing it on your designed block diagram.
Q: Assume a multi-level cache. The L1 cache has a miss-rate of 5%. There is miss penalty of 30 cycles…
A: Average miss penalty = L1 miss rate * L2 miss penalty + L2 miss rate*Main memory penalty.
Q: For a direct-mapped cache with 32KİB data, 16-word blocks, and 24-bit addresses, answer the…
A: As per Bartleby guidelines “Since you have asked multiple questions, we will solve the first…
Q: Compute Average Memory Access Time (AMAT) for a system that consists of a 2- level cache design.…
A: Given: L1 cache access time = 1 cycle L2 cache access time = 5 cycle memory access time = 20 cycle…
Q: Identify the set number, tag, and word position for the 30-bit address stored in an 8K line set…
A: 30-bit address as it is set associative cache address is divided into 3 parts => tag, set number,…
Q: Design a direct-mapped cache with 128 KB that uses 32-bits and 16 bytes per block. Calculate: -How…
A: Given: Cache size = 128kb Pysical address = 32-bits Block Size = 16 bytes.
Q: Design a direct mapped cache with 64kB of data and 4-word block size and assume 32 bits address.…
A: A direct mapped cache is one of the simplest technique of memory mapping, in which each address of…
Q: a) calculate the total number of bits required to implement a 64 KiB cache with 16 - word blocks.…
A:
Q: Assume that a system’s memory has 128M bytes. Blocks are 64 bytes in length, and the cache consists…
A: The memory has 128 words. 128 = 227 words. Therefore, 27 bits are needed for address space. A…
Q: , define Tc= first-level cache access time= 0.2ns; Tm = memory access time= 0.8ns; H= first-level…
A: For a system with single level of cache, define Tc= first-level cache access time= 0.2ns; Tm =…
Q: emory are there? What are the size of the tag, line number and words? To which cache block will the…
A: Q. Tag, Set No. and Word values for 4-way set associative mapping cache.A computer using direct…
Q: nanoseconds
A: Introduction: Speed up: Cache is the fastest memory by which a computer access its data for…
Q: 1c) A computer has a 256 KByte, 4-way set associative, write back data cache with the block size of…
A:
Q: A block-set associative cache memory consists of 128 blocks divided into four block sets. The main…
A: To find no. of bits required for addressing the main memory, to represent the TAG, SET AND WORD…
Q: a) Calculate the total number of bits required to implement a 64 KiB cache with 16-word blocks.…
A:
Q: 1. A 64-bit word computer system employs an 8 MB cache. The address bus in this system is 38 bits.…
A: Question 1 : Word size = 8 bytes ; No of bits to represent word = 3 bitsNo of words in cache =…
Q: iss rate of 11.6% and the D-Cache has a miss rate of 16.1%. The miss penalty to L2 cache is 20…
A: consider a computer system with 2 levels of caches L1 and L2.L1 Cache has I cache and a D-cache. The…
Q: A 64 KB four-way set-associative cache is byte- addressable and contains 32B lines. Memory addresses…
A: Given: Memory address= 32 bits Cache Size=64KB = 216 bytes Block size=32 Bytes = 25 bytes 4 way set…
Q: Given the following cache and cache configuration: 2-way set associative 4 byte cache line 32 byte…
A: Given size of cache= 32 Bytes Size of block = 4 bytes A. Number of cache blocks = size of cache /…
Q: A cache block has 64 kbyte. The main memory has latency 64 usec and bandwidth 1 GBps. What is the…
A: For a 1 GBps bandwidth, loading 109 bytes on line takes 1 second, so 64 bytes will take 64*1/109=64…
Q: Assume that a system's memory has 128M bytes. Blocks are 64 bytes in length, and the cache consists…
A: The ANswer is in Below steps
Q: A certain processor uses a fully associative cache of size 16 kB. The cache block size is 16 bytes.…
A: The answer for the tag and index fields respectively in the addresses generated by the processor is
Q: Q(5) A memory system and a direct mapped cache with following characteristics is given. Main memory…
A: Below is the answer to answer to the above question. I hope this will be helpful for you..
Q: ppose a computer using direct mapped cache has 4MB of byte-addressable main memory, and che of 512…
A: A) Total number of blocks in main memory = Memory size /block size = 2^22/2^4 = 2^18 B) Size of…
Q: Cache Performance Please answer the following questions regarding average memory access time (AMAT).…
A:
Q: How many total bits are required for a direct-mapped cache with 64 KiB of data and 4-word blocks,…
A: Required: to find How many total bits are required for a direct-mapped cache with 64 KiB of data and…
Q: How MMU is used to address the physical and logical cache arrangement? Explain the difference…
A: MMU(Memory Management Unit) is the hardware used to map the logical address into a physical address.…
Q: main memory address FEDCBAH, show the following information in hexadecimal format:
A: The given hexadecimal address is FEDCBA The binary equivalent of the given hexadecimal number is…
Q: Examine Figure 1 below, explain how the cache controller will respond to the CPU when the CPU is…
A: Answer : Whenever CPU request the cache controller for the data , then cache controller goes into…
Q: A certain computer system is consisting of 32 GB main memory and 32 MB cache memory. The cache uses…
A: Given: A certain computer system is consisting of 32 GB main memory and 32 MB cachememory. The cache…
Q: Direct Mapping Cache Problem. Given a Windows XP machine (32-bit architecture) that is byte…
A: Cache memory is an intermediatory memory accessed by the CPU(Central Processing Unit) for fast…
Q: Consider a computer with the following characteristics: total of 4 Mbyte of main memory; word size…
A: GIVEN THAT Given that- Maximum memory size = 1 MB. Word size = 1 Byte. Block size = 16 bytes…
Q: A computer has a 256 Kbyte, 4-way set associative, write back data cache with block size of 32…
A: 4-way set associative - 256 Kbyte Cache block size - 32 Bytes. Cache tag directory contains - 2…
Q: Assume that L1 cache can be written with 16 bytes every 4 processor cycle, the time to receive the…
A: Below is the answer with explanation and calculation:
Q: A 256 KB, direct-mapped write-back data cache with a block size of 32 Bytes is available on a…
A: A cache in the primary storage hierarchy contains cache lines that are grouped into sets. If each…
Q: $ Tag vali Block d 000 10010 1 001 10101 1 010 01111 1 011 10100 0 100 11101 1 101 10001 0 110 00001…
A: Concert the decimal address 47869 to binary 47869 = 1011101011111101 Here set index => 10111…
Q: Caches: For a 256KB, 4-way set-associative cache with 64-Byte blocks and 32-bit byte-addressable…
A: Block size = 64B So block offset bits = log 64= 6 bits. Total number of cache block = 256KB/64B =…
Q: A memory system has a 32 KB byte-addressable main memory and a 1 KB cache where each block contains…
A: Here, we are going to discuss about different mapping techniques in cache memory topic. And we will…
Q: A 64 KB four-way set-associative cache is byte- addressable and contains 32B lines. Memory addresses…
A: As per our guidelines we are allowed to answer only one question at a time. If you want answer of…
Q: In a cache and memory system with the following characteristics: Direct Mapped 16 KByte 32 Byte…
A: Given Data cache = 16KB = 214B Memory address = 32 bits Block Size = 32 B =25B So, block offset=5…
Q: L1 data (D-L1) cache configuration of Core 2 Duo is given as below Size 32KB, 8-way set…
A: Introduction :
Q: For an 8-word wide cache with the following access times: L1: 10 bus cycles, L2: 500 bus cycles,…
A: An 8 word wide cache contains:- 8 * 4B= 32B : 1 word 4B Miss penalty = L1+L2*8 words =…
Q: How many total bytes would be necessary for a 4-way set associative cache with 64 KBytes of data…
A: 1 word is 32 bits as we are using 32 bit address Therefore, 1 Word = 4 Bytes Size of a cache block =…
Q: microprocessor with 32-bit address bus has an on-chip 16-KByte four-way set-associative cache…
A: It is defined as a controlling unit of a micro-computer, fabricated on a small chip capable of…
Q: How many total bits are required for a direct-mapped cache with 64 KiB of data and 4-word blocks,…
A: Introduction How many total bits are required for a direct-mapped cache with 64 KiB of data and…
Q: The physical address size on a machine has 35 bits width. The number of bits in the tag field in a…
A: Introduction :Given , Size of physical address = 35 bits cache size = 64 KB associativity = 4 way We…
Q: A main memory sized 8 GByte with 64 words/line is mapped to the following: a- A 16 KByte cache…
A: Below is the answer to above question. I hope this will meet your requirements...
Q: ache is organized as a 4 way set associative cache Each set's cache line consists of 4 words…
A: Given Data : Cache set associative = 4 Cache line size = 4 words 1 word = 4 Byte Tag field…
Q: Consider a direct-mapped cache with 2 MB data 16-word block and 32-bit addressing. a. Find the…
A: The Answer is
Q: Identify the line number, tag, and word position for the 30-bit address shown below if it is stored…
A: Address: 23D94EA616 Lines in cache: 4K Block size: 2
Design a direct mapped cache with 1 MB of data and 6-word block size and assume a 33-bit address. Select the index of the cache and must keep the calculations by showing it on your designed block diagram.
Trending now
This is a popular solution!
Step by step
Solved in 2 steps with 1 images
- A 2-way set-associative cache consists of four sets. Main memory contains 2K blocks of 8 bytes each and byte addressing is used.Q.) Show the main memory address format that allows us to map addresses from main memory to cache. Be sure to include the fields as well as their sizes.For a direct mapped cache with 6-word a block, 33-bit address and 18-bits index , calculate the cache entry size in bits and must keep the calculations for submission later by showing it on your designed block diagram.A 256 KB, direct-mapped write-back data cache with a block size of 32 Bytes is available on a computer. The cache controller receives 32-bit addresses from the CPU. In addition to the address tag, each cache tag directory entry comprises two valid bits, one modified bit, and one replacement bit. Determine the number of bits in the tag field.
- For a direct-mapped cache design with a 32-bit address, the following bits of the address are used to access the cache. We assume that each word has 4 bytes. How many entries does the cache have? Tag Index Offset Block offset | Byte offset 31–12 11-6 5-2 1-0In a Direct Mapped Cache Memory Physical Address format the Cache line offset field size and word offset field size are same (with word size of one Byte). The number of tag bits in the Physical Address format is equal to the number of blocks in Cache Memory. If the Tag field Size is Mega words. 16 bits, the size of the physical Memory isFor a direct-mapped cache design with a 32-bit address, the following bits of the address are used to access the cache. Tag 31-10 Index 9-5 a. What is the cache block size (in words)? b. How many entries does the cache have? Offset 4-0 c. What is the ratio between total bits required for such a cache implementation over the data storage bits?
- For a direct-mapped cache with 64KİB data, 8-word blocks, and 32-bit addresses, answer the following questions: a) What is the number of blocks/lines in the cache? b) Identify the bits in the 32-bit address that are used as index bits? c) Identify the bits in the 32-bit address that are used as tag bits? d) What is the total number of bits in this cache (including tag field and valid field)? e) Identify the block number in the cache to which the following 32-bit memory address maps: Ox00003Z00 (Hexadecimal notation) where Z is the least significant digit in your student ID (written as a decimal number)For a direct-mapped cache design with a 32-bit address, the following bits of the address are used to access the cache. a. What is the cache block size in words? b. How many entries does the cache have? Tag 31-13 Index 12-6 Offset 5-0A cache is set up with a block size of 32 words. There are 64 blocks in cache and set up to be 4-way set associative. You have byte address 0x8923. Show the word address, block address, tag, and index Show each access being filled in with a note of hit or miss. You are given word address and the access are: 0xff, 0x08, 0x22, 0x00, 0x39, 0xF3, 0x07, 0xc0.
- CO. A certain processor uses a fully associative cache of size 16 kB. The cache block size is 16 bytes. Assume that the main memory is byte addressable and uses a 32-bit address. How many bits are required for the Tag and the Index ticlds respectively in the addresses generated by the processor?The phrases "unified cache" and "Hadley cache" should be defined.For a direct-mapped cache design with a 64-bit address, the following bits of the address are used to access the cache. Tag Index Offset 63-9 8-5 4-0 Beginning from power on, the following byte-addressed cache references are recorded. Нех 00 04 10 84 E8 AO 400 1E 8C Cic B4 884 (A) For cach reference, list (i) its teg, index, end offset, (ii) whether it is a hit or a miss, and (iii) which bytes were replaced (if any). (B) what is the hit ratio? (C) List the final state of the cache, with each valid entry represented as a record of . For example,