Consider a pair of pipes running in parallel, through which 1200 GPM flows, which have thefollowing features:Pipe 1: Carbon Steel, Schedule 40, 8" Diameter, 1200 GPM, Water at 44°F, Fittings:2 tees, 2 butterfly valves, 2 pressure gauges with their respective ball valves, 1 valvemotorized balloon. All valves are completely open. Length of the pipe is 6 feet. Pipe 2: consists of a carbon steel bypass pipe, schedule 40, diameter of 4",with the following accessories: 2 elbows long radius of 90° and an open globe valve.The length of the pipe is 10 feet. a) Determine the flow rate in each pipe.b) The pressure drop.

Consider a pair of pipes running in parallel, through which 1200 GPM flows, which have thefollowing features:Pipe 1: Carbon Steel, Schedule 40, 8" Diameter, 1200 GPM, Water at 44°F, Fittings:2 tees, 2 butterfly valves, 2 pressure gauges with their respective ball valves, 1 valvemotorized balloon. All valves are completely open. Length of the pipe is 6 feet. Pipe 2: consists of a carbon steel bypass pipe, schedule 40, diameter of 4",with the following accessories: 2 elbows long radius of 90° and an open globe valve.The length of the pipe is 10 feet. a) Determine the flow rate in each pipe.b) The pressure drop.

Refrigeration and Air Conditioning Technology (MindTap Course List)

8th Edition

ISBN:9781305578296

Author:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Publisher:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Chapter8: Leak Detection, System Evacuation, And System Cleanup

Section: Chapter Questions

Problem 2RQ: Name and briefly describe the six classes of leaks.

See similar textbooks

Similar questions

A perfect venture with throat diameter of 1.8 inches is placed horizontally in a pipe with a 5 in inside diameter. 80 lb of water flow through the pipe each second. What is the difference between the pipe and venture throat static pressure?
Question - You must discuss in detail the way in which the pitot tube and nozzle flow meter are used to calculate velocity or volume flow rate. Write the velocity (or flow rate) equations for both and a detailed description of the what you did.
## Draw and describe a simplified diagram of a section of an industrial sugar and alcohol piping system, which contains the following equipment: 1 Pump 1 Heat Exchanger Elbows for changing the flow path Flux Valves The ultimate goal is to calculate system and pump pressure losses.
Problem 2. Water at 150°F is pumped at the rate of 60 gal/min from a reservoir at atmospheric pressure. The gauge pressure at the end of the discharge line is 42 psi. The discharge point is 12 ft above the level is the reservoir and the suction line is 6 ft above the level of the reservoir. The discharge line is a 1 ½ in. nominal dimeter steel pipe with a schedule number of 80. The pressure drop due to friction in the suction line is known to be 0.8 psi, and that in the discharge line is 7.2 psi. The mechanical efficiency of the pump is 70%. Calculate (a) the developed head of the pump and (b) the total power input. (c) If the pump manufacturer specifies a required NPSH of 8 ft, will the pump be suitable for this service?
4. A special oil is to be used in an absorption tower. The preliminary design of the unit requires the oil to be pumped from an open tank with a 10 ft liquid level above the floor and forced through 150 ft of 3 inches schedule 40 pipe with a ball check valve and 5 elbows into the top of a tower 30 ft above the floor. The operating pressure in the tower is to be 52 psig and the oil requirement is estimated at 50 gpm. The viscosity of the oil 15 cP and its density is 53.5 Ibm/ft. Assuming the pumping outfit operates with an overall efficiency of 60%, what horsepower input will be required for the pump motor?
Compare a orifice plate for low speed to a Pitot Static Tube.
Draw and describe a simplified diagram of a section of an industrial sugar and alcohol piping system, which contains the following equipment: 1 Pump 1 Heat Trocador Elbows for changing the flow path Flux Valves The ultimate goal is to calculate system and pump pressure losses.
Submit the correct solution . Handwritten recommended
Don't use chatgpt. I need right answer.
A 400 gpm piping system is composed of the following pipes and fittings. Using the chart; Determine the Following: a. Equivalent length at suction in ft b. Equivalent length at discharge in ft c. Total friction loss in the installation, in ft. Suction side (4.5” Փ) Length of straight pipe 210 ft Long sweep elbow 5 pcs Standard Tee 2 pcs Globe valve 1 pc Checked valve 1 pc Gate valve (fully open) 1 pc Discharge side (4.0” Փ) Straight pipe 200 ft Standard elbow 4 pcs Standard Tee 3 pcs Gate valve (fully open) 1 pc
Specify the sizes of pipes (cast iron, schedule 40) and the size of the motor to be used for a pump to lift water at 40 Ips, from reservoir A to reservoir B. Consider the following data: Total static head 50 m Fittings & valves; Suction line 1 foot valve, 1 standard elbow, and 1 gate valve 1 check valve, 1 gate valve, 1 long sweep elbow, and 2 standard elbows Discharge line Length of straight pipes: Suction pipe Discharge pipe Absolute viscosity of water Absolute roughness of cast iron Darcy-Weisbach friction factor Water velocity 300 m 80 m 0.001002 Pa-s 0.00026 m 0.025 1.0 m/s to 2.75 m/s Neglect the head losses in the foot valve and at the pipe exit in the discharge reservoir, and do not use equal sizes for the suction and discharge pipes.
Problem #4 If the pressure difference between points 1 and 2 is 25 psi, what will be the flow rate? The pipes are galvanized iron with 0.0005 ft. Take v = 1.06 × 10−5 ft²/s and neglect Kis = minor losses. 10 in. dia 1. 2000 ft, 8 in. dia A B 1600 ft, 6 in. dia с 2. 800 ft, 10 in. dia-