Consider a hollow steel shaft with a 130 mm outside diameter and a 70 mm inside diameter. What is the maximum torque this shaft can transmit if the shear yield stress is 1.4x108 Pa and the behavior is elastic, perfectly plastic?

Consider a hollow steel shaft with a 130 mm outside diameter and a 70 mm inside diameter. What is the maximum torque this shaft can transmit if the shear yield stress is 1.4x108 Pa and the behavior is elastic, perfectly plastic?

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Related questions

Q: A hollow steel shaft transmits 600 kW at 500 r.p.m. The maximum shear stress is 62.4 MPa. Find the…

A: Find the outside and inside diameter .

Q: Solid circular shaft is under bending and torsion loadings. Uniaxial tensile yield strength of the…

Q: A hollow steel shaft 2304mm long is to be designed to transmit a torque of 28350 kJ. The shear…

A: Given data: steel shaft long (l)=2304mm transmit torque(T)=28350KJ Shear modulus of…

Q: Consider a hollow steel shaft with a 130mm outside diameter and a 70mm inside diameter. What is the…

A: Given Data⇒ Hollow steel shaft Outside diameter of shaft(D)=130 mm=0.13 m Inside diameter of…

Q: shaft of 53 mm diameter is subjected to a bending moment of 1477158 N-mm and a torque T N-mm. If the…

Q: The tubular rotor shaft of a wind turbine shown in Figure 3(a) is of 50 mm and 40 mm outer and inner…

A: Given: Outer diameter of the tube→Do=50 mm=0.05 m Inner diameter of the tube→Di=40 mm=0.04 m Torque…

Q: Calculate the following: i. The polar second moment of area, J

A: Given data Outer Diameter of the shaft = Do = 50 mm = 0.05 mInner Diameter of the shaft = Di = 40 mm…

Q: 3. (a) (b) (c) A hollow steel driving shaft has the modulus of rigidity is 80 GN/m² and its Young's…

A: The shear modulus of the shaft, G = 80 GPaThe length of shaft, L = 6 mThe diameter ratio, D/d =…

Q: A hollow shaft with outside diameter of 135 mm and wall thickness of 8 mm transmits 182 kW at 400…

A: L=5m 1psi= 6894.76 N/m2

Q: A mild steel shaft of 50mm diameter is subjected to a bending moment of 1.9kNm. If the yield point…

A: Introduction The maximum shear stress hypothesis states that a material will fail or yield if its…

Q: The axis of a tree has the following data, the diameter d= 40mm and the length is L= 0.9m and it…

Q: Figure 2: cylindrical shaft

Q: A circular steel shaft with length, L (m) has an outer diameter, d2 (mm) and inner diameter, d1…

A: To find: The angle of twist in degrees. Given: The inner diameter is d1=100 mm1 m1000 mm=0.1 m. The…

Q: yield strength of oy 750 MPa. Determine the design factor of safety using Tresca and von Mises…

A: DefinitionTersca Theory:A ductile material fails or yields when its maximum shear stress equals or…

Q: A hollow shaft is to transmit 390 kW at 70 rpm. If the shear stress is not to exceed 45 MPa and the…

A: Diameter ratio, Di/Do=0.58 Di=0.58 x Do Power, P=390kW=390000 W Speed, N=70 r.p.m Max Torque,…

Q: (a) The tubular rotor shaft of a wind turbine shown in Figure 3(a) is of 50 mm and 40 mm outer and…

A: Given data Outer Diameter of Tubular shaft = Do = 50 mm = 0.05 mInner Diameter of Tubular Shaft = Di…

Q: c) The steel alloy shaft having a diameter of 38 mm is used to transmit torque, T as shown in Figure…

A: Given Data: τ=80kPa (i) Shear stress is to be given by: Maximum torque that can be transmitted.

Q: A mild steel shaft of 48 mm diameter is subjected to a bending moment of 1850 Nm and a torque T. If…

Q: A torsional bar is subjected to two external torques (10Nm and 5Nm) and a distributed torque…

A: according to the details given above

Q: An aluminium bar is in the form of an equilateral triangle 30 mm on a side. What torque is required…

A: We know that an aluminium bar has 30 mm on each side and is in the shape of an equilateral…

Q: A motor driving a solid circular steel shaft transmits 30 kW to a gear at B (as shown). The…

A: Here is the solution for the above question.

Q: 5.2 A hollow bronze shaft of 75 mm outside diameter and 12.5 mm thick is coaXlal WiU. solid steel…

A: Outer diameter, Do=75 mmInner diameter, Di=50 mmDiameter of steel shaft, D=50 mmT=5693 N.m Note:…

Q: Example 1 A shaft is transmitting 100 kW at 160 rp.m. Find a suitable diameter for the shaft, if the…

A: Stress: When a component or a part is subjected to any external force, a resisting force will be…

Q: 25m (a) The tubular rotor shaft of a wind turbine shown in Figure 3(a) is of 50 mm and 40 mm outer…

A: Given data:- Inner diameter = 40 mm Outer diameter = 50 mm Torque = 2.5 kN-m Moment = 3.6 kN-m Find…

Q: For the solid shaft, 1 inch in diameter, subjected to bending and torsion, find the principal…

Q: The tubular rotor shaft of a wind turbine shown in Figure 3(a) is of 50 mm and 40 mm outer and inner…

Q: A hollow shaft with outside diameter of 165 mm and wall thickness of 8 mm transmits 192 kW at 400…

Q: The bending stress at point A.

A: Given data Outer Diameter of Shaft = Do = 50 mm = 0.05 mInner Diameter of Shaft = Di = 40 mm = 0.04…

Q: The steel alloy shaft having a diameter of 38 mm is used to transmit torque, T as shown in Figure…

Q: An open-coiled helical spring consists of 12 coils, each of mean diameter 60 mm, wire diameter 6 mm…

A: A spring is a mechanical device which is used for the efficient storage and release of energy.…

Q: A 30 mm diameter shaft transmits 10 kW at 600 rpm. It was found that a stress raiser exist whose…

A: The given values are - P= 10 kW, d= 30mm, N = 600rpm, τsy=150 MPa Let T be the twisting moment.

Q: A circular shaft having diameters D and d and a groove of radius r (with M = 0 and P = 0) is made of…

Q: A solid 2 inch diameter bar is experiencing a torque of 3000 in-lb. The material of the bar has a…

A: Torsional Shear Stress Calculation:The first step is to calculate the torsional shear stress in the…

Q: A solid circular shaft to transmit,80kw power at 200rpm.calculate the shaft diameter and strain…

Q: Submit correct and complete solutions. give propriate Explanation. Provide step-by-step detailed…

A: Approach to solving the question: I carefully read the given information to understand what needs to…

Q: You are asked to study the distribution of shear stress and the angular deflection in solid and…

Q: The steel alloy shaft having a diameter of 38 mm is used to transmit torque, T as shown in Figure…

Q: 1) A straight hollow shaft is fixed at one end and free at the other end. The shaft is made of…

A: A moment of inertia is a mass of the body when a body is rotating on an axis. The moment of inertia…

Concept explainers

Combined Loading

Any functioning component, such as machine parts, structural members, pressure vessels, and so on, are all under the influence of more than one force. When anybody is under the influence of more than one force such as shear forces, bending moments, axial forces, torsion, and so on, then such body is said to be under combined loading. A very practical example of combined loading is the crankshaft of an internal combustion engine (IC engine). The crankshaft of the IC engine is under high rpm, which is caused due to the torsional forces. Due to the presence of piston, counterbalances, and internal imbalances, the crankshaft experiences lateral forces and due to the rise in temperature, the crankshaft undergoes thermal expansion, which pulls the crankshaft along the axial direction and lateral direction. The presence of unbalanced loads along the periphery of the crankshaft also induces a bending moment.

Question

Consider a hollow steel shaft with a 130 mm outside diameter and a 70 mm inside diameter.
What is the maximum torque this shaft can transmit if the shear yield stress is 1.4x108 Pa and
the behavior is elastic, perfectly plastic?

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step 3

VIEW

Step by step

Solved in 3 steps with 2 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

I need the answer as soon as possible
Find FOS using max distortion energy
(b) Figure 6(b) shows a cantilever shaft made of steel subjected to several loading T = 5kNm, M = 2.5kNm, and P = 120kN. If the diameter of the shaft is 60mm, and the yield stress is 310MPA, calculate the safety of factor of the shaft using the Von Mises yield criterion.
A thin tube of uniform thickness 5 mm and square cross section, shown below, is subject to a torque of 1500 N·m. The shear modulus of the material is 80 GPa. What will be the angle of twist per length (in unit: rad/m)? 50 mm 50 mm
A cylindrical steel shaft is required to transmit a bending moment of 1000 Nm and a torque of 2200 Nm with a safety factor against yielding of 3. If the steel has a yield stress of 250 MPa, find the minimum permissible diameter for the shaft. Use von Mises’ theory of yielding.
Problem 2 A solid steel shaft 5 m long is stressed at 80 MPa when twisted through 4°. Using G = 83 GPa, compute the shaft diameter and torsional stiffness. What power can be transmitted by the shaft at 20 Hz? Answers: 138 mm, 591.2 kN.m/rad and 5.19 MW
5- Please solve this question in detail. Thanks
Please present drawings/FBD’s illustrating your solution.
2. Justify the simplification of this problem to only modeling one-eighth of the cross section 3. Construct two-dimensional elements grid (i.e., grid/mesh region), make the correct numbering and labeling of the nodes and elements.
Steel shaft can be produced as solid body or circular tube with circular tube. The shaft must bear a torque of 1200 Nm. Since the shear strength for the shaft material is 40 MPa, the maximum allowable unit torsion angle of the bar is 0.75 ^ 0 / m and the shear modulus of steel is G = 78 GPa;a) Find the required diameter d0 for a solid circle shaft.b) Find the required outside diameter d2 for a ring-section shaft whose thickness is one tenth of the outer diameter.c) Find the diameter ratio (d2 / d0 ratio) and weight ratio for ring cross section and solid section shafts
Parvinbhai
1) A stepped steel shaft, shown below, is used in a spur gear reducer. The shaft is subjected to a constant axial stress (A=40 MPa), a constant bending moment that results in a variable stress (M=60 MPa) due to loads by bearings and gears, and a steady torque (T-80 MPa). However, these stress values do not take into account stress concentration factors. The shaft has a D=45 mm, d=30 mm, and r=6 mm, resulting in kr,bend=1.34, Kr,axial=1.48, and kf,tor 1.2. The shaft is made of steel with S₁=1006 MPa, S,=648 MPa, and H₂=229. The size of the shaft results in a gradient factor of CG=0.9. The shaft has a fine-ground finish. A 90% reliability is required. Verify the stress concentration factors are correct for this shaft geometry. Calculate the safety factor relative to infinite life (105 cycles). If the safety factor is less than one (i.e., shaft fails), find the number of cycles to failure. (60) M