Consider a furnace (as a plane wall) which has a thickness of 15 cm and a surface area of 1 m?. The inside surface of the furnace wall (the hot left side of the wall) is at temperature T1. The furnace wall is made of brick with thermal conductivity of 1.198 W/m.K. The outside surface of the furnace wall (the right side of the wall) has a surface emissivity of 0.8 and is maintained at T2=101 °C and subject to air at 25 °C with convection heat transfer coefficient of 20 W/m?.K. The surroundings temperature at the outside of the furnace wall is at 25 °C. Required: Draw a clear and consistent schematic of the problem and label the operating conditions on the schematic. Perform systematic analysis, state your assumptions and justify the equation used and determine the following (circle your final answers): (i) The rate of heat transfer by convection (in W); (ii) The rate of heat radiation (in W); (iii) The surface temperature of the furnace wall T1 (in °C); (iv) The rate of conduction heat transfer across the wall (in W).

Consider a furnace (as a plane wall) which has a thickness of 15 cm and a surface area of 1 m?. The inside surface of the furnace wall (the hot left side of the wall) is at temperature T1. The furnace wall is made of brick with thermal conductivity of 1.198 W/m.K. The outside surface of the furnace wall (the right side of the wall) has a surface emissivity of 0.8 and is maintained at T2=101 °C and subject to air at 25 °C with convection heat transfer coefficient of 20 W/m?.K. The surroundings temperature at the outside of the furnace wall is at 25 °C. Required: Draw a clear and consistent schematic of the problem and label the operating conditions on the schematic. Perform systematic analysis, state your assumptions and justify the equation used and determine the following (circle your final answers): (i) The rate of heat transfer by convection (in W); (ii) The rate of heat radiation (in W); (iii) The surface temperature of the furnace wall T1 (in °C); (iv) The rate of conduction heat transfer across the wall (in W).

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

An ice chest whose outer dimensions are 30 cm*40 cm*40 cm is made of 3 cm thick Styrofoam (k = 0.033 W/m°C). Initially, the chest is filled with 30 kg of ice at 0 °C, and the inner surface temperature of the ice chest can be taken to be 0 °C at all times. The heat of fusion of water at 0 °C is 333.7 kJ/kg, and the surrounding ambient air is at 20 °C. Disregarding any heat transfer from the 40 cm*40 cm base of the ice chest, determine how long it will take for the ice in the chest to melt completely if the ice chest is subjected to (a) calm air and (b) winds at 30 km/h (assume the heat transfer coefficient on the front, back and top surfaces to be the same as that on the side surfaces). Use the thermophysical properties of air as follows: k = 25.5×10-3 W/mK, ν = 15×10-6 m2/s, α = 21.1×10-6 m2/s, and β = 3.43×10-3 K-1.
Consider a person standing in a room at 18°C. Determine the total rate of heat transfer from this person if the exposed surface area and the skin temperature of the person are 1.7 m2 and 32°C. respectively, and the convection heat transfer coefficient is 5 W/m2-K. Take the emissivity of the skin and the clothes to be 0.9, and assume the temperature of the inner surfaces of the room to be the same as the air temperature.
A thermal window consisting of two panes of 0.25" glass (R-value 0.08 hr · ft2. °F/BTU each), separated by a layer of air 0.75" thick is now used as a horizontal window in the ceiling (a skylight) of an air conditioned room. Find its R-value in the summer, when the outside is warmer than the inside, and in the winter, when the inside is warmer than the outside (in hr . ft2. °F/BTU). (Assume that the air is moving outside the window.) R (summer) hr · ft2. °F/BTU R (winter) hr : ft2 . °F/BTU
The wall of an oven in an industrial plant, made of fire brick (k = 0.71 W/m/K) has thickness of L = 15 cm. The oven is exposed to air at 28oC and the surfaces of the far surroundings are at 20oC. If the temperature of the outer surface of the wall is 92oC and the heat transfer coefficient and emissivity are 20 W/(m^2*K) and 0.8 respectively, determine the temperature of the inner surface of the wall.
kindly help me with this question. Thank you, I am having a hard time solving this
The wall of a house is 4-meter-high and 15 -meter- wide. The wall is constructed with a 9-cm thick outer layer of brick and a 5-cm inner layer of insulating material. On a cold day, the outer surface temperature of the wall is -5°C while the inner surface temperature is 24°C. The thermal conductivity of the brick is 0.80 W/m-K, while the thermal conductivity of the insulation is 0.03 W/m-K . both inner and outer and outer has transfeer coefficeint of 20 W/m2- K a. What is the total thermal resistance of the wal? b. What is the rate of heat loss through the wal
A 3-m2 hot black surface at 80°C is losing heat to the surrounding air at 25°C by convection with a convection heat transfer coefficient of 12 W/m2.°C, and by radiation to the surrounding surfaces at 15°C. Compute for the total rate of heat loss from the surface.
Consider an alumınum pan used to cook food on top of an electric range. The bottom section of the pan has thickness of L = 0.3 cm and diameter of D = 20 cm. The electric heating unit transfers 800 W of power to the pan. During steady operation. the temperature of the inner surface of the pan is measured to be 110 C. Which of the following boundary conditions is correct during this cooking process; Waler 4. a. Nore of the options D. 25.46 KW/m- T-1)= 110 C %3D Oc T,-o 110 °C & 4x=L 800 W m- %3D d. 9=0 = 800 Wm? To-03m)= 110°C
A pipe in a manufacturing plant is transporting superheated vapor at a mass flow rate of 0.3 kg/s. The pipe is 10 m long, has an inner diameter of 5 cm and pipe wall thickness of 6 mm. The pipe has a thermal conductivity of 17 W/m.K, and the inner pipe surface is at a uniform temperature of 120 °C. The temperature drop between the inlet and the exit of the pipe is 7 °C, and the constant pressure specific heat of vapor is 2190 J/kg.°C. If the air temperature in the manufacturing plant is 25°C, determine the heat transfer coefficient as a result if convection between the outer pipe surface and the surrounding air. T(r) = 120°C Superheated Air, 25°C r2 vapor r1 0.3 kg/s L = 10 m Tin-Tout = 7°C
The heat flux from a wall to air in motion having a heat transfer coefficient of 15 W/m². K and exposed to a temperature difference of 20 °C is www.bilibilitetit O 225 W O 300 W O 250 W O 375 W wwwwww
I got t=531.96 seconds is that right