Complete the leveling table given below for the sewer line AF. If an upward gradient of lin 20 starts at station (A) at a level of 100m above datum. Calculate the depth of excavation and the height of embankment at each station along the sewer line. Station B.M. A B C D E F Distance (m) 0 100 200 300 400 500 Staff Readings (m) I.S. F.S. B.S. 9.710 7.430 11.720 3.150 1.060 4.170 0.230 3.560 6.390 ΔΗ (m) Rise Fall R.L. (m) 103.620

Complete the leveling table given below for the sewer line AF. If an upward gradient of lin 20 starts at station (A) at a level of 100m above datum. Calculate the depth of excavation and the height of embankment at each station along the sewer line. Station B.M. A B C D E F Distance (m) 0 100 200 300 400 500 Staff Readings (m) I.S. F.S. B.S. 9.710 7.430 11.720 3.150 1.060 4.170 0.230 3.560 6.390 ΔΗ (m) Rise Fall R.L. (m) 103.620

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

FL.mechanics.
Exercise 1: Compute the critical slope of 0.75m diameter circular channel (n = 0.01) that conveys flow of 0.5m³/s.
Three manholes MH1, MH2 and MH3 have been constructed along Platform 1 andPlatform 2 as shown in Figure 1. The reduced level of platform 1 is 23.500 m AOD andit was dropped 1.0 m downward to platform 2. The sewer is to be laid from MH1 toMH2 and MH2 to MH3 with a uniform gradient of 1 in 300 and 1 in 200 respectively. Thehorizontal distances from MH1 to MH2 and from MH2 to MH3 are 38.778 m and 88.312m respectively. The staff reading at TBM and invert level of MH1 were 1.366 and 2.768respectively.i) Determine the invert level of MH1, MH2, and MH3.ii) Calculate depth to be excavated at MH3.
1) Design a flocculation basin for water at 10°C flowing at Q = 49,200 m3/day for a typical process.train in a drinking water treatment plant. The basin shall be a cross-flow, horizontal-shaft, paddlewheel type with an average velocity gradient of G = 26.7 sec−1, a detention time τ = 45 minutes,and a Gτ value of 50,000 to 100,000. Tapered flocculation shall be used in three compartments ofequal depth in series. Compartments shall be separated by slotted, redwood baffle fences andhave a level basin floor. G-values shall be 50, 20, and 10 sec−1 as the water passes through eachcompartment sequentially. The flocculation basin shall have a width of 27.43 m matching theadjacent sedimentation basin width. Paddle wheels shall have blades with a 150-mm width and alength of 3.05 m. Outer blades should clear the floor by 305 mm and be 305 mm below the watersurface. Six blades shall be used per paddle wheel with a clear spacing of 305 mm between theblades. There shall be a clear spacing of 760 to…
pls help me answer my homework asap. thank you.
Question A cross-flow, horizontal shaft, paddle wheel flocculation basin is to be designed for a flow of 25,000m/d, a mean velocity gradient of 26.7/sec (at 10° C), and a detention time of 45 minutes. The GT value should be from 50,000 Tapered flocculation is to be provided, and the three The G values to 100,000. compartments of equal depth in series are to be used. determined from laboratory tests for the three compartments are G1 = 50/sec, 20/sec, and G3 = 10/sec. These give an average G value of 26.7/sec. %3D G2 The compartments are to be separated by slotted, redwood baffle fences, and the floor of the basin is level. The basin should be 1.5 m in width to adjoin the settling tank. Determine: 1. The GT value 2. The basin dimensions 3. The power to be imparted to the water in each compartment
laid on a slope of 1 in 4 000? 10.16. At what depth will 400 cfs flow uniformly in an earth- lined (n = 0.025) trapezoidal canal of base width 15 ft, having side slopes 1 on 3, if the canal is laid on a slope of 1 in 10 000? 10.17. Calculate the depth of uniform flow for a flowrate of
1. a) Draw the flow velocity profile development at the entrance of a pipe.
Help me solve
o T ☺ ť The 40° side slope for triangular channel has a flow rate Q = 16 m3 /sec. Compute a) yc, b) Vc, and c) Sc if n = 0.018. مر ر ل لأعلي لاستعراض الفلاتر إضافة شرح. . . mum <
Answer as fast as possible, use 3 decimal
HYDRAULICSPLEASE PROVIDE COMPLETE SOLUTIONNEED ASAP THANKS