Column Load at Grid B1 L2 L1 The floor construction in this structure comprises two way spanning slabs, supported by simply supported beams. The slabs are not continuous across the central support beam on Grid B. Ignore the self weight of the beams and columns. The ULS floor load is 12.2 kN/m². The structure has lengths L1 = 5.0 m and L2 = 3.3 m. What is the vertical reaction from the floor at Grid B1? Give your answer in kN and to one decimal place.

Column Load at Grid B1 L2 L1 The floor construction in this structure comprises two way spanning slabs, supported by simply supported beams. The slabs are not continuous across the central support beam on Grid B. Ignore the self weight of the beams and columns. The ULS floor load is 12.2 kN/m². The structure has lengths L1 = 5.0 m and L2 = 3.3 m. What is the vertical reaction from the floor at Grid B1? Give your answer in kN and to one decimal place.

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

Determine shear force in every portion
The steel framework is used to support the 100-mm reinforced stone concrete slab that carries a uniform live loading of 5 kN/m2. Sketch the loading that acts along members BE and FED. Set a = 3m, b = 5m. Hint: See Table 1.2
Where is neutral axis of the gutter section with reference from the bottom of the channel? What is the moment of inertia of the section with respect to the X-axis? What is the reaction of the hinge support at B? What is the maximum flexural stress of the beam? What is the flexural stress 3 ft. from the roller support at D ?
B, P2 A -a→* The stair beam in the figure will have support reactions. A support is a fixed, B support is a sliding joint. 37 - loads P1 = 15 kN, P2 = 30 kN, dimensions a = 2 m, b = 6 m, c = 4 m. Асcordingly Bу %3D? = а) 39.25 О В) 3.75 OC) 22.25 OD) 18.75 TO) 0 → ku
The Channel section is used as a purlin placed on top of trusses with spacing of 4.6 m and slope 1V to 4H. The purling are supporting a total uniform load of 17.7 kN/m. Properties of Channel: Sx = 119 x 10^3 mm^3 Sy = 87 x 10^3 mm^3 Compute the maximum bending stress.
The building slab is subjected to four parallel column loadings. Take F1 = 15 kN and F2 = 12 kN. (a) Determine the equivalent resultant force. (b) Specify its location (x, y) on the slab. 12 kN 6 kN 8 m 6 my 12 m 16 m 4 m
A 1.6-m-long cantilever beam supports a concentrated load of P = 7.2 kN. The beam is made of a rectangular timber having a width of 120 mm and a depth of 280 mm. Calculate the shear stress due to the applied load at a point located d = 76 mm below the top surface of the beam. d 280 mm B 1.6 m 120 mm O 254 kPa O 156 kPa O 183 kPa O 204 kPa O 269 kPa Save for Later Attempts: 0 of 1 used Submit Answer
The steel framework is used to support the 100-mm reinforced stone concrete slab that carries a uniform live loading of 5 kN/m2. Sketch the loading that acts along members BE and FED. Set a = 3m, b = 5m. Hint: See Table 1.2
A concrete foundation mat in the shape of a regular hexagon of side 12m supports four-column loads as shown (Note: Force at C is 10kN). Determine the magnitudes of the additional loads in kN which must be applied at B and F if the resultant of all six loads is to pass through the center of the mat.
4
The steel framework is used to support the 100-mm reinforced stone concrete slab that carries a uniform live loading of 5 kN/m2. Sketch the loading that acts along members BE and FED. Set a = 3m, b = 5m. Hint: See Table 1.2
Q2/ Determine the forces at the pin joint (F) and the roller support (G) ? 30KN 20KN 2m By 2m D 2m E G = 130 KN, Fx = 130 KN, and Fy = 50 KN %3D %3D G = 50 KN, Fx = 70 KN, and Fy = 100 KN G = 0 KN, Fx = 0 KN, and Fy = 50 KN All of the above 2m