39. CNC milling machine is moving from P(1, 1) and Q(51, 1) having pitch 1 mm and backlashangle 1.8° then backlash length (mm) will be ?

0.05*50=0.25mm detailed solution given in attachment.

Answered: CNC milling machine is

Engineering

Mechanical Engineering

CNC milling machine is

Precision Machining Technology (MindTap Course List)

2nd Edition

ISBN:9781285444543

Author:Peter J. Hoffman, Eric S. Hopewell, Brian Janes

Publisher:Peter J. Hoffman, Eric S. Hopewell, Brian Janes

Chapter5: Turning

Section5.3: Machining Operations On The Lathe

Problem 5RQ: Calculate spindle RPM and machining time for cutting a 1.5" diameter 4" long at 225 SFPM using a...

See similar textbooks

Related questions

Q: explain how a bandsaw, drilling press, and milling machine are used

A: Working of the band saw machine:- This machine is used to make the rough cuts through the metal…

Q: 13. For ........, Metal-Removal Rate is equal to the multiplication of (diameter, feed, and feed…

A: The material removal rate in milling is given by the equation, The material removal rate in…

Q: Which of the following process is used to finish the bores of internal combustion engines: Surface…

A: Option (e) is correct. Honing Process

Q: How are work pieces made of carbon steel be clamped/secured to a reciprocating table on a surface…

A: Workpieces made of carbon steel are fastened to table and it can be moved under the grinding wheel…

Concept explainers

Automation in manufacturing processes

The term automation refers to the technique through which the creation of an apparatus takes place using an automatic process or a system. Let us try to understand this with an example.

Question

39. CNC milling machine is moving from P(1, 1) and Q(51, 1) having pitch 1 mm and backlash
angle 1.8° then backlash length (mm) will be ?

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step by step

Solved in 2 steps with 1 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

thickness is HW3.A block of steel has a length L-600mm and a width W-450mm. The Machined 10mm, once by Peripheral Milling and once by planing Machine.Calculate :Machining time for each operation if you know the following For peripheral milling: cutting speed V =80 m/min, Feed f-0.15mm/rev, the cutter .1 diameter D =50 mm with five teeth and depth of cut d =3mm For planing: clearance on both sides c =25mm, cutting speed V =36.56 m/min, retum to .2 cutting ratio m =0.25, feed f=5 mm/stroke and depth of cut d =5 mm .Calculate Material removal rate in both processes .3 Solution
An end milling operation is carried out along a straight line path that is 325 mm long. The cut is in a direction parallel to the x‑axis on a CNC machining center. Cutting speed = 30 m/min, and chip load = 0.06 mm. The end milling cutter has two teeth and its diameter = 16.0 mm. The x‑axis uses a DC servomotor connected directly to a leadscrew whose pitch = 6.0 mm. The optical encoder emits 400 pulses per revolution of the screw. Determine (a) feed rate during the cut, (b) rotational speed of the motor, and (c) pulse rate of the encoder at the feed rate indicated.
pls solve
In a slab milling operation , L_w = 200 mm table feed = 18 mm/min, diameter of cutter = 34 mm depth of cut = 2 mm. Considering approach and overtravel to be same. The milling time in min will be?
Sample Problem 3 How long will it take to mill a % inch by 2 long keyway in a 3 in diameter shafting with a 24 tooth cutter turning at 100 rpm and 0.005 inch feed per tooth?
Please do Asap
Expert Q&A Done The top surface of a rectangular workpart is machined using a peripheral milling operation. The workpart is 735 mm long by 50 mm wide by 95 mm thick. The milling cutter, which is 60 mm in diameter and has five teeth, overhangs the width of the part equally on both sides. Cutting speed = 80 m/min, chip load = 0.30 mm/tooth, and depth of cut = 7.5 mm. (a) Determine the time required to make one pass across the surface, given that the setup and machine settings provide an approach distance of 5 mm before actual cutting begins and an overtravel distance of 25 mm after 1.2 9. 20 65 73 actual cutting has finished v in seconds. (b) What is the maximum material 3.9 239 removal rate during the cut v in mm3/sec? 0.127 5
Determine the machining time for plain milling a rectangular surface of length 100 mm and width 50 mm by a helical fluted plain HSS milling cutter of diameter 50 mm, length 75 mm and 10 teeth. Assume A = O = 5 mm, VC = 40 m/min and so = 0.1 mm/tooth.
A long workpiece, with the length-to-dimeter ratio that exceeds factor 10, is to be machined. Which workholding should provide the lowest deflection? Collet in the spindle and a live center in the tailstock Chuck on the spindle, a live center in the tailstock, and a follower rest Mandrel Solid center with a dog and a dog plate on the spindle, a live center in the tailstock Faceplate
Question 2 Face milling, using an Ø 75 mm cutter with 10 inserts rotating at 280 rpm, is being carried out on a copper alloy block as shown in Figure 1. Direction of cut Cutter Workpiece 37,5 200 37,5 Figure 1: Illustration of the face milling operation on a copper alloy material The feed rate during the machining process is 560 mm/min for a 1.5 mm depth of cut. 2.1 If the cutter is rotating clockwise, in which type of milling operation does it result? What is the advantages and disadvantages of this milling operation? 2.2 Calculate the cutting time required for the machining process shown in Figure 1. 2.3 Calculate the power required for the machining operation. 2.4 If the number of inserts is reduced to 6, how would it influence the manufacturing process? Provide reasons for your answer.
Calculate spindle RPM and machining time for cutting a 1.5" diameter 4" long at 225 SFPM using a feed rate of 0.004".
What is a benefit of using a DRO instead of micrometer collars for positioning on a vertical milling machine?