QUESTION 8 3. check the capacity of the shear connection. A992: Fy=50ksi, Fu=65ksi A36: Fy=36ksi, Fu=58ksi effective bolt hole diameter = bolt hole + 1/16" beam properties: tw=0.295 in. Fexx=70ksi what is the shear yielding capacity of shear plate in kips? (2 decimal places)

Q: Three steel plates are joined by three 20-mm diameter rivets. If the ultimate shear stress in the…

A:

Q: 6.8 Problem: A bracket shown in figure 6.8 carries an eccentric load of 80 kN at an eccentricity o…

A:

Q: 1-66 Figure P1-69 shows a bolt subjected to a tensile load. One failure mode would be, if the…

A: Force = 22.3 kN or 22300 NDiameter of shank, d = 12 mm Thickness (t) = 8mm

Q: 10 mm 20 mm The assembly above is comprised of a 10mm-diameter steel bolt, and a 20mm-diameter,…

A: option (d) or last option is correct  the explanation is given below

Q: 2. The figure shows a plate having a width of 400mm and thickness of 12mm is to be connected to…

A:

Q: Determine the maximum factored LRFD tensile force capacity in tension only (no block shear). The…

A: We know that Maximum factored LRFD tensile force capacity of the member is given by minimum of the…

Q: The angle shown in the figure is L 7 X4 X 7/16. Steel used is AS72 Gr. 55 steel. Diameter of bolts…

A: diameter of bolt = 1.125inch distance between two bolts=3inchs Ag=4,62in2 by steel table fy =70ksi…

Q: A bracket shown in the figure 6.9 carries an eccentric load of 30 kN at an eccentricity of 200 mm.…

A:

Q: Use ASD to determine the width of the 5/8 inch thick A36 plate subjected to tension as shown below.…

A: ASD5/8 inch thick A36 platedead load, PD=85 kiplive load ,PL=80 kipTwo rows of 5/8 inch standard…

Q: 2. A vertical member of a steel truss is subjected to a live load of 25 kN and a service dead load…

A: LL = 25 kNDL = 50 kNU = 1.0Plate dimensions: 10 x 100 mmFactored load:P = 1.2 DL + 1.6 LL = (1.2x50)…

Q: 1. Two A36 16mm thick steel plates are connected by four rivets shown. 50 PU O 50 x 50 50 a.…

A:

Q: PROBLEM NO. 2: Two plates each with thickness t = 16mm are bolted together with 6-22mm diameter…

A: Data Given:S1 = 40 mmS2 = 80 mmS3 = 100 mmt = 16 mmBolt diameter (db)= 16 mmAsked:Allowable strength…

Material Properties

Construction in civil engineering demands high strength, durability, and longevity. These targets can be achieved by better design and analysis, along with the correct choice of materials. Different materials have different properties and hence, they respond and performs differently under the various condition of external loadings. It is therefore a critical task of an engineer to select the right material based on the property that the material is supposed to function in real-time. When speaking about the property, there are different categories of material properties like chemical property, physical property, mechanical property, electrical property, magnetic property, thermal property, etc. These material properties form the basis of material selection in various applications.