Blocks A and B have a masses of 200 kg and 240 kg , respectively.(Figure 2) The coefficient of static friction between A and B and between B and C is 0.210. Thecoefficient of static friction between the rope and peg E is 0.430. Pulley D rotates freely, and P = 29.0 N. If 0 = 60.0 degrees , what is the smallest magnitude, T, oftension, T, that causes block B to move?Express your answer numerically in kilonewtons to three significant figures.• View Available Hint(s)vec?T =kN Figure<) 2 of 3<>EDAPT

Concept used: A vector can be split into horizontal and vertical components. An object has to…

Answered: Blocks A and B have a masses of 200 kg…

Similar questions

Below is a diagram showing two blocks joined with a rope that runs over a pulley. The mass m2 is 5.0 kg and theincline is 25°. The coefficient static of friction between m1 and the inclined plane is 0.20.Determine the minimum mass for m1 such that m2 does not start moving downward
A truck pulls a trailer with a frictional force of 870 N and a coefficient of friction of 0.23. What is the trailer's normal force?
A 1,500-N crate is being pushed across a level floor at a constant speed by a force F of 370 N at an angle of 20.0° below the horizontal, as shown in the figure a below. 20.0° F F 20.0⁰ (a) What is the coefficient of kinetic friction between the crate and the floor? (Enter your answer to at least three decimal places.) (b) If the 370-N force is instead pulling the block at an angle of 20.0⁰° above the horizontal, as shown in the figure b, what will be the acceleration of the crate? Assume that the coefficient of friction is the same as that found in part (a). m/s²
A crate is pulled up using frictionless pulleys, as shown in the diagram, at an angle of 45 degrees. The masses are: for the small pulley, m1 = 2.5kg, for the travelling pulley, M2 = 3.0kg, and for the crate, MC = 13.0kg. What is the minimum tension (in Newtons) with which the operator must pull, in order to slowly raise the crate?
Find the tension in each cord and the acceleration of the blocks. The coefficient of friction for all contact surfaces is 0.15 and the pulleys are frictionless. T 500N B 100N T1 250N 3
Determine two force members first. Two blocks are each pin connected to a massless horizontal link. Determine the largest P before motion cocurs. Use 0.35 and 0.3 for the friction coefficients. 4.5 kg 3 kg B 30°
Write the equilibrium equation for the forces in the y-direction. Express your answer in terms of F1, F2, F3, and P. Express known forces in N and angles in degrees. ∑Fy = 0 =
Two objects are connected by a light string that passes over a frictionless pulley as shown in the figure below. Assume the incline is frictionless and take m, = 2.00 kg, m2 = 7.55 kg, and 0 = 56.0°. Use g=9.8 m/s2.
A 1,380-N crate is being pushed across a level floor at a constant speed by a force F of 320 N at an angle of 20.0° below the horizontal, as shown in the figure a below. a) What is the coefficient of kinetic friction between the crate and the floor? (Enter your answer to at least three decimal places.)(b) If the 320-N force is instead pulling the block at an angle of 20.0° above the horizontal, as shown in the figure b, what will be the acceleration of the crate? Assume that the coefficient of friction is the same as that found in part (a).m/s2
Two boxes are stacked as shown in the diagram below. The bottom box has a mass of 3.5 kg and the top box has amass of 1.5 kg. They are pushed up a ramp inclined at 15° by an applied force of 25 N, applied to the lower boxand directed parallel to the ramp. The coefficient of kinetic friction between the ramp and the bottom box is 0.12.Determine the minimum coefficient of static friction required to keep the top box in place on the bottom box.
The pulley and all surfaces are frictionless. Suppose both blocks are made of solid gold. In addition, each block has a mass of 2.38 kg. Find the tension (in N) in the connecting the two gold blocks. Round your answer to 2 decimal places.
Rachel pulls a 30.0 kg box across the floor with a rope that makes an angle of 32o with the floor. She pulls with a force of 250 N. The coefficient of friction between the box and the floor is 0.75. What is the acceleration of the box?

SEE MORE QUESTIONS