StartThree cables having an area of 0.05 in2each is carrying the load W as shown. With no stress, the original lengths of the cables are 74.99 ft, 75.00 ft, and 74.94 ft.llabusEsmentsE = 29 x 10° psiencesntsorsonW1500 lbWhich of the following most nearly gives the stress in the longest wire?Select the correct response:12,099.13 psi8,342.87 psiO10,194.03 psi6,131.66 psi

To find: The stress in longest cable. Given: The load is W=1500 lb. The length of the three cables…

art ● pus ents es Three cables having an area of 0.05 in² each is carrying the load W as shown. With no stress, the original lengths of the cables are 74.99 ft, 75.00 ft, and 74.94 ft. 7.5.² 12,099.13 psi 8,342.87 psi Which of the following most nearly gives the stress in the longest wire? Select the correct response 10,194.03 psi W 6,131.66 psi E = 29 x 106 psi 1500 lb

art ● pus ents es Three cables having an area of 0.05 in² each is carrying the load W as shown. With no stress, the original lengths of the cables are 74.99 ft, 75.00 ft, and 74.94 ft. 7.5.² 12,099.13 psi 8,342.87 psi Which of the following most nearly gives the stress in the longest wire? Select the correct response 10,194.03 psi W 6,131.66 psi E = 29 x 106 psi 1500 lb

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

1.4 (A). Twe fork-end pieces are to be joined together by a single steel pin of 25 mm diameter and they are required to transmit 50 kN. Determine the minimum cross-sectional area of material required in one branch of either fork if the stress in the fork material is not to exceed 180 MN/m2. What wili be the maximum shear stress in the pin' [1.39 x 10-m'; 50.9 MN/m] 1.5 (A) A simple turabuckle arrangement is constructed from a 40 mm outside diameter tube threaded internally at each end to take two rods of 25 man outside diameteT with threaded cnds. What will be the nominal stresscs set up in the tube and the rods, ignoring thread depth, when the turabuckle carries an axial load of 30 kN? Assuming a suficient strength of thread, what maximum load can be transmitted by the turnbuckle if the maximum stress is imited to 180 MN/m? [39.2, 61.1 MN/m2, 88.4 kN.]
Solve show all steps
!
Three cables having an area of 0.05 in^2 each is carrying the load W as shown. With no stress, the original lengths of the cables are 74.99 ft, 75.00 ft, and 74.94 ft. E = 29 x 10° psi Calculate for the stress in the intermediate wire. Choices: a. 8,026.65 psi b. 9,999.66 psi c. 19,939.80 psi d. 10,102.52 psi 1500 lb
1
6. What is the stress, in ksi, in the 0.040 in. diameter guy wire if the tension in the clothes line is 30 lb? Use a = 2.5 ft, b = 3.5 ft, and c = 6 ft. a. b. b 50.4 60.4 a Clothes line Guy wire C. d. 70.4 Answer is not among the choices
Use Mohr's Circle to determine the maximum shear stress on the element, also using Mohr's Circle determine the maximum normal stress on the element.
A of magnesium having a rectangular cross section of dimension 3.2 mm x 19.1 mm and a gauge length of 63.5 is pulled in tension. Use the load-elongation characteristics tabulated as follows to: Load (KN) Al (mm) 0.0 1.38 2.78 5.63 743 8.14 9,87 12.85 14,10 14.34 13.83 12,59 0.0 0.03 0.06 0.12 0.20 0.25 0.64 1.91 3,18 4.45 5.72 6.99 a) Plot the data as engineering stress versus engineering strain. b) Compute the modulus of elasticity. Determine the tensile strength of this alloy. Sace