An underfeed stoker feeds coal to a boiler at the rate of 100 kg/hr. The ultimate analysis of coal is: C = 75.2 %, H;= 3.6 %, O; = 7.4 %, N2 = 1.2 %, S = 2.1 % and the remaining is Ash. The dry refuse taken from the ash pit shows 20 % C and 80 % ash by weight. Orsat analysis of the flue gases gives the following composition, CO, = 75.2 %, O2 = 7.9 %, CO= 1 % Determine: a) m³ of air supplied per minute if the pressure is 100 kPaa and 20 °C; b) Total volume of flue gases flowing through the stack per minute if the temperature is 60 °C and pressure is 100 kPaa.

An underfeed stoker feeds coal to a boiler at the rate of 100 kg/hr. The ultimate analysis of coal is: C = 75.2 %, H;= 3.6 %, O; = 7.4 %, N2 = 1.2 %, S = 2.1 % and the remaining is Ash. The dry refuse taken from the ash pit shows 20 % C and 80 % ash by weight. Orsat analysis of the flue gases gives the following composition, CO, = 75.2 %, O2 = 7.9 %, CO= 1 % Determine: a) m³ of air supplied per minute if the pressure is 100 kPaa and 20 °C; b) Total volume of flue gases flowing through the stack per minute if the temperature is 60 °C and pressure is 100 kPaa.

Chemistry

10th Edition

ISBN:9781305957404

Author:Steven S. Zumdahl, Susan A. Zumdahl, Donald J. DeCoste

Publisher:Steven S. Zumdahl, Susan A. Zumdahl, Donald J. DeCoste

Chapter1: Chemical Foundations

Section: Chapter Questions

Problem 1RQ: Define and explain the differences between the following terms. a. law and theory b. theory and...

See similar textbooks

Similar questions

The coal whose composition is given in the table below is burntwith 100% excess air. Calculate (a) the theoretical oxygenrequirement per 100 kg of coal (b) the theoretical air requirementper 100 kg of coal (c) the Orsat analysis of the gases when thecoal is burnt with 100% excess air. Component Weight % C 70.32 H2 3.91 S 0.52 O2 25.25
5) A German fuel blend called Reichkraftskoff is made up of 50% motor benzole (75% benzene, 15% toluene, 10% xylene), 25% tetralin (C10H12), and 25% industrial alcohol (80% ethanol, 20% methanol). After combustion in excess air, a stack gas containing 9.13% CO₂ and 1.83% CO is obtained. Calculate: a) % excess air (50%) b) complete orsat analysis of the stack gas (8.09% O2, 80.95% N₂)
1. A wet gas from a field in Iran is processed through two stages of separation; first stage separator operates at 220 psia and 71°F, while the stock tank operates at atmospheric pressure and 69°F. The separator gas condensate ratio is 41,000 scf/STB and the stock tank gas condensate ratio is 450 scf/STB. The molecular weights of the separator gas and stock tank gas are 25.0 and 35.0 lb/lb-mol, respectively. The stock tank condensate gravity is 0.85 and its molecular weight is 125 lb/lb-mol. Let us calculate the specific gravity of the reservoir gas in a step-wise manner, by considering quantities for one STB of condensate. Note that 1.0 bbl is 5.614 ft. Separator gas MWsg = 25 lb/lb-mol 41,000 scf/STB Reservoir gas 1st stage separator 220 psia and 71°F Stock tank gas MWsg = 35 lb/lb-mol 450 scf/STB 2nd stage separator (Stock tank) 14.7 psia and 69°F MW=125 lb/lb-mol SGstc = 0.85 Stock tank condensate a. to one STB. Calculate the mole number [lb-mole] of the stock tank condensate that…
//Ethane (CnH2n+2 ) is burned with atmospheric air. The analysis of the products on a dry basis is as follows: СО39.7% 02=1.7 % CO = 2.9% N2 =-85.7% Calculate the air-fuel ratio and the percent theoretical air and determine the combustion equation. %3D
Ammonia is an important chemical for fertilizer production around the world. One method to produce ammonia is by the electrochemical reaction between water and nitrogen using a reverse fuel cell. A simplified reaction proceeds as: 2N2 + 6H20 -> 302 + 4NH3 What volume of ammonia gas at 55°C and 580 mmHg will be produced from 2.00 g of nitrogen? Assume ammonia is an ideal gas. For the toolbar, press ALT+F10 (PC) or ALT+FN+F10 (Mac). BIUS E v E v AN Paragraph Arial 14px
Determine the volume (L) of hydrogen needed (based on room temperature 25 °C and l atm) to hydrotreat 1 liter crude oil with 1.8 wt % S to a sulfur content of 0.2 wt%. The oil has a specific gravity of 0.8 (compared to water). The stoichiometry follows the following reaction: Oil-S + 2H2¬→O¡I-H2 + H2S